Pull Xtensa updates from Chris Zankel:
 "Xtensa improvements for 4.6:

   - control whether perf IRQ is treated as NMI from Kconfig
   - implement ioremap for regions outside KIO segment
   - fix ISS serial port behaviour when EOF is reached
   - fix preemption in {clear,copy}_user_highpage
   - fix endianness issues for XTFPGA devices, big-endian cores are now
     fully functional
   - clean up debug infrastructure and add support for hardware
     breakpoints and watchpoints
   - add processor configurations for Three Core HiFi-2 MX and HiFi3
     cpus"

* tag 'xtensa-next-20160320' of git://github.com/czankel/xtensa-linux:
  xtensa: add test_kc705_hifi variant
  xtensa: add Three Core HiFi-2 MX Variant.
  xtensa: support hardware breakpoints/watchpoints
  xtensa: use context structure for debug exceptions
  xtensa: remove remaining non-functional KGDB bits
  xtensa: clear all DBREAKC registers on start
  xtensa: xtfpga: fix earlycon endianness
  xtensa: xtfpga: fix i2c controller register width and endianness
  xtensa: xtfpga: fix ethernet controller endianness
  xtensa: xtfpga: fix serial port register width and endianness
  xtensa: define CONFIG_CPU_{BIG,LITTLE}_ENDIAN
  xtensa: fix preemption in {clear,copy}_user_highpage
  xtensa: ISS: don't hang if stdin EOF is reached
  xtensa: support ioremap for memory outside KIO region
  xtensa: use XTENSA_INT_LEVEL macro in asm/timex.h
  xtensa: make fake NMI configurable

Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel v4.6.  There is quite a
  lot of interesting stuff going on.

  The patches to other subsystems and arch-wide are ACKed as far as
  possible, though I consider things like per-arch <asm/gpio.h> as
  essentially a part of the GPIO subsystem so it should not be needed.

  Core changes:

   - The gpio_chip is now a *real device*.  Until now the gpio chips
     were just piggybacking the parent device or (gasp) floating in
     space outside of the device model.

     We now finally make GPIO chips devices.  The gpio_chip will create
     a gpio_device which contains a struct device, and this gpio_device
     struct is kept private.  Anything that needs to be kept private
     from the rest of the kernel will gradually be moved over to the
     gpio_device.

   - As a result of making the gpio_device a real device, we have added
     resource management, so devm_gpiochip_add_data() will cut down on
     overhead and reduce code lines.  A huge slew of patches convert
     almost all drivers in the subsystem to use this.

   - Building on making the GPIO a real device, we add the first step of
     a new userspace ABI: the GPIO character device.  We take small
     steps here, so we first add a pure *information* ABI and the tool
     "lsgpio" that will list all GPIO devices on the system and all
     lines on these devices.

     We can now discover GPIOs properly from userspace.  We still have
     not come up with a way to actually *use* GPIOs from userspace.

   - To encourage people to use the character device for the future, we
     have it always-enabled when using GPIO.  The old sysfs ABI is still
     opt-in (and can be used in parallel), but is marked as deprecated.

     We will keep it around for the foreseeable future, but it will not
     be extended to cover ever more use cases.

  Cleanup:

   - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
     includes.

     This dates back to when GPIO was an opt-in feature and no shared
     library even existed: just a header file with proper prototypes was
     provided and all semantics were up to the arch to implement.  These
     patches make the GPIO chip even more a proper device and cleans out
     leftovers of the old in-kernel API here and there.

     Still some cruft is left but it's very little now.

   - There is still some clamping of return values for .get() going on,
     but we now return sane values in the vast majority of drivers and
     the errorpath is sanitized.  Some patches for powerpc, blackfin and
     unicore still drop in.

   - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
     implementations to use gpiochip_add_data() and cut down on code
     lines.

   - MPC8xxx is converted to use the generic GPIO helpers.

   - ATH79 is converted to use the generic GPIO helpers.

  New drivers:

   - WinSystems WS16C48

   - Acces 104-DIO-48E

   - F81866 (a F7188x variant)

   - Qoric (a MPC8xxx variant)

   - TS-4800

   - SPI serializers (pisosr): simple 74xx shift registers connected to
     SPI to obtain a dirt-cheap output-only GPIO expander.

   - Texas Instruments TPIC2810

   - Texas Instruments TPS65218

   - Texas Instruments TPS65912

   - X-Gene (ARM64) standby GPIO controller"

* tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits)
  Revert "Share upstreaming patches"
  gpio: mcp23s08: Fix clearing of interrupt.
  gpiolib: Fix comment referring to gpio_*() in gpiod_*()
  gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit
  gpio: xgene: Fix kconfig for standby GIPO contoller
  gpio: Add generic serializer DT binding
  gpio: uapi: use 0xB4 as ioctl() major
  gpio: tps65912: fix bad merge
  Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"
  gpio: omap: drop dev field from gpio_bank structure
  gpio: mpc8xxx: Slightly update the code for better readability
  gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip
  gpio: mpc8xxx: Fixup setting gpio direction output
  gpio: mcp23s08: Add support for mcp23s18
  dt-bindings: gpio: altera: Fix altr,interrupt-type property
  gpio: add driver for MEN 16Z127 GPIO controller
  gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free
  gpio: timberdale: Switch to devm_ioremap_resource()
  gpio: ts4800: Add IMX51 dependency
  gpiolib: rewrite gpiodev_add_to_list
  ...

This patch updates csum_ipv6_magic so that it correctly recognizes that
protocol is a unsigned 8 bit value.

This will allow us to better understand what limitations may or may not be
present in how we handle the data.  For example there are a number of
places that call htonl on the protocol value.  This is likely not necessary
and can be replaced with a multiplication by ntohl(1) which will be
converted to a shift by the compiler.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates all instances of csum_tcpudp_magic and
csum_tcpudp_nofold to reflect the types that are usually used as the source
inputs.  For example the protocol field is populated based on nexthdr which
is actually an unsigned 8 bit value.  The length is usually populated based
on skb->len which is an unsigned integer.

This addresses an issue in which the IPv6 function csum_ipv6_magic was
generating a checksum using the full 32b of skb->len while
csum_tcpudp_magic was only using the lower 16 bits.  As a result we could
run into issues when attempting to adjust the checksum as there was no
protocol agnostic way to update it.

With this change the value is still truncated as many architectures use
"(len + proto) << 8", however this truncation only occurs for values
greater than 16776960 in length and as such is unlikely to occur as we stop
the inner headers at ~64K in size.

I did have to make a few minor changes in the arm, mn10300, nios2, and
score versions of the function in order to support these changes as they
were either using things such as an OR to combine the protocol and length,
or were using ntohs to convert the length which would have truncated the
value.

I also updated a few spots in terms of whitespace and type differences for
the addresses.  Most of this was just to make sure all of the definitions
were in sync going forward.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use perf framework to manage hardware instruction and data breakpoints.
Add two new ptrace calls: PTRACE_GETHBPREGS and PTRACE_SETHBPREGS to
query and set instruction and data breakpoints.
Address bit 0 choose instruction (0) or data (1) break register, bits
31..1 are the register number.
Both calls transfer two 32-bit words: address (0) and control (1).
Instruction breakpoint contorl word is 0 to clear breakpoint, 1 to set.
Data breakpoint control word bit 31 is 'trigger on store', bit 30 is
'trigger on load, bits 29..0 are length. Length 0 is used to clear a
breakpoint. To set a breakpoint length must be a power of 2 in the range
1..64 and the address must be length-aligned.

Introduce new thread_info flag: TIF_DB_DISABLED. Set it if debug
exception is raised by the kernel code accessing watched userspace
address and disable corresponding data breakpoint. On exit to userspace
check that flag and, if set, restore all data breakpoints.

Handle debug exceptions raised with PS.EXCM set. This may happen when
window overflow/underflow handler or fast exception handler hits data
breakpoint, in which case save and disable all data breakpoints,
single-step faulting instruction and restore data breakpoints.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

With implementation of data breakpoints debug exceptions raised when
PS.EXCM is set need to be handled, e.g. window overflow code can write
to watched userspace address. Currently debug exception handler uses
EXCSAVE and DEPC SRs to save temporary registers, but DEPC may not be
available when PS.EXCM is set and more space will be needed to save
additional state.
Reorganize debug context: create per-CPU structure debug_table instance
and store its address in the EXCSAVE<debug level> instead of
debug_exception function address. Expand this structure when more save
space is needed.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

For a long time all architectures implement the pci_dma_* functions using
the generic DMA API, and they all use the same header to do so.

Move this header, pci-dma-compat.h, to include/linux and include it from
the generic pci.h instead of having each arch duplicate this include.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

asm/gpio.h is included only by linux/gpio.h, and then only when the arch
selects ARCH_HAVE_CUSTOM_GPIO_H.  Only the following arches select it: arm
avr32 blackfin m68k (COLDFIRE only) sh unicore32.

Remove the unused asm/gpio.h files for the arches that do not select
ARCH_HAVE_CUSTOM_GPIO_H.

This is a follow-on to 7563bbf89d06 ("gpiolib/arches: Centralise
bolierplate asm/gpio.h").

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This wasn't an asm-generic header to start with, and can be merged into
dma-mapping.h trivially.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Helge Deller <deller@gmx.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>