linux.git/arch/xtensa/boot, branch v3.17 Linux kernel source tree xtensa: configure kc705 for highmem 2014-08-14T07:59:25+00:00 Max Filippov jcmvbkbc@gmail.com 2014-03-24T01:16:02+00:00 b82837c772c3a1d8778295ab094cf46ecddc8057 Enable all memory available on KC705 (1G - 128M) by default. Update memory node in DTS and also limit usable memory in bootargs in case memmap is passed from the bootloader. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> 
Enable all memory available on KC705 (1G - 128M) by default. Update memory
node in DTS and also limit usable memory in bootargs in case memmap is
passed from the bootloader.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa: add support for KC705 2014-04-06T17:32:02+00:00 Max Filippov jcmvbkbc@gmail.com 2013-04-28T15:15:56+00:00 9c602629e34bad88a464e08de08118e80beee0d8 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> 
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa: xtfpga: introduce SoC I/O bus 2014-04-06T17:32:02+00:00 Max Filippov jcmvbkbc@gmail.com 2014-02-22T23:48:32+00:00 08a7bbf624072bed1cb35e5b4db7d538580f731c Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> 
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa: xtfpga: set ethoc clock frequency 2014-02-21T17:33:44+00:00 Max Filippov jcmvbkbc@gmail.com 2014-01-29T03:53:44+00:00 2bc2fde63858322a942864bf6cb2d54f5aa33186 Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC base frequency in the platform data in case of build w/o CONFIG_OF. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> 
Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC
base frequency in the platform data in case of build w/o CONFIG_OF.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa: xtfpga: use common clock framework 2014-02-21T17:33:43+00:00 Max Filippov jcmvbkbc@gmail.com 2014-01-29T03:42:46+00:00 cdc9af7ccfc26d35ff8a29dded2cc2c096c0fc1e With this change the board needs to set up single clock object, users of this clock will get correct frequency automatically. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> 
With this change the board needs to set up single clock object, users of
this clock will get correct frequency automatically.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa: standardize devicetree cpu compatible strings 2014-01-14T20:21:25+00:00 Baruch Siach baruch@tkos.co.il 2013-12-01T08:13:33+00:00 42beb7628e7a901501e39f520beec67bac3157b1 The recommended compatible string format, according to the ePAPR v1.1 standard, is "manufacturer,model". Change the xtensa cpu compatible strings to "cdns,xtensa-cpu". Also, change the boards compatible strings in a similar way. The pic compatible string will be dealt with in a separate patch. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> 
The recommended compatible string format, according to the ePAPR v1.1 standard,
is "manufacturer,model". Change the xtensa cpu compatible strings to
"cdns,xtensa-cpu". Also, change the boards compatible strings in a similar way.

The pic compatible string will be dealt with in a separate patch.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa: move built-in PIC to drivers/irqchip 2014-01-14T18:19:56+00:00 Max Filippov jcmvbkbc@gmail.com 2013-12-01T08:59:49+00:00 cbd1de2e8e46207cead11034f92ea8a018b11189 Extract xtensa built-in interrupt controller implementation from xtensa/kernel/irq.c and move it to other irqchips, providing way to instantiate it from the device tree. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> 
Extract xtensa built-in interrupt controller implementation from
xtensa/kernel/irq.c and move it to other irqchips, providing way to
instantiate it from the device tree.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
xtensa: don't use echo -e needlessly 2013-09-06T16:48:29+00:00 Max Filippov jcmvbkbc@gmail.com 2013-08-22T14:09:47+00:00 123f15e669d5a5a2e2f260ba4a5fc2efd93df20e -e is not needed to output strings without escape sequences. This breaks big endian FSF build when the shell is dash, because its builtin echo doesn't understand '-e' switch and outputs it in the echoed string. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> 
-e is not needed to output strings without escape sequences. This breaks
big endian FSF build when the shell is dash, because its builtin echo
doesn't understand '-e' switch and outputs it in the echoed string.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
xtensa: add static function tracer support 2013-07-08T08:18:57+00:00 Max Filippov jcmvbkbc@gmail.com 2013-05-24T03:02:25+00:00 478ba61afccd3a4d7ca662cadff1d35d183fe67d Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> 
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
xtensa: tell git to ignore generated .dtb files 2013-07-08T08:18:55+00:00 Baruch Siach baruch@tkos.co.il 2013-06-07T05:44:34+00:00 77b4dcdbfab4c288a3d211f307b5daa0bf45d0f8 Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> 
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>