<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/arch/x86/platform, branch master</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>x86/efi: Restore IRQ state in EFI page fault handler</title>
<updated>2026-05-05T07:31:28+00:00</updated>
<author>
<name>Ard Biesheuvel</name>
<email>ardb@kernel.org</email>
</author>
<published>2026-05-01T07:16:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=2c340aab5485ebe9e33c01437dd4815ef33c8df5'/>
<id>2c340aab5485ebe9e33c01437dd4815ef33c8df5</id>
<content type='text'>
The kernel's softirq API does not permit re-enabling softirqs while IRQs
are disabled. The reason for this is that local_bh_enable() will not
only re-enable delivery of softirqs over the back of IRQs, it will also
handle any pending softirqs immediately, regardless of whether IRQs are
enabled at that point.

For this reason, commit

  d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")

disables softirqs only when IRQs are enabled, as it is not permitted
otherwise, but also unnecessary, given that asynchronous softirq
delivery never happens to begin with while IRQs are disabled.

However, this does mean that entering a kernel mode FPU section with
IRQs enabled and leaving it with IRQs disabled leads to problems, as
identified by Sashiko [0]: the EFI page fault handler is called from
page_fault_oops() with IRQs disabled, and thus ends the kernel mode FPU
section with IRQs disabled as well, regardless of whether IRQs were
enabled when it was started. This may result in schedule() being called
with a non-zero preempt_count, causing a BUG().

So take care to re-enable IRQs when handling any EFI page faults if they
were taken with IRQs enabled.

[0] https://sashiko.dev/#/patchset/20260430074107.27051-1-ivan.hu%40canonical.com

Cc: Eric Biggers &lt;ebiggers@kernel.org&gt;
Cc: Ivan Hu &lt;ivan.hu@canonical.com&gt;
Cc: x86@kernel.org
Cc: &lt;stable@vger.kernel.org&gt;
Fixes: d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")
Reviewed-by: Eric Biggers &lt;ebiggers@kernel.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The kernel's softirq API does not permit re-enabling softirqs while IRQs
are disabled. The reason for this is that local_bh_enable() will not
only re-enable delivery of softirqs over the back of IRQs, it will also
handle any pending softirqs immediately, regardless of whether IRQs are
enabled at that point.

For this reason, commit

  d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")

disables softirqs only when IRQs are enabled, as it is not permitted
otherwise, but also unnecessary, given that asynchronous softirq
delivery never happens to begin with while IRQs are disabled.

However, this does mean that entering a kernel mode FPU section with
IRQs enabled and leaving it with IRQs disabled leads to problems, as
identified by Sashiko [0]: the EFI page fault handler is called from
page_fault_oops() with IRQs disabled, and thus ends the kernel mode FPU
section with IRQs disabled as well, regardless of whether IRQs were
enabled when it was started. This may result in schedule() being called
with a non-zero preempt_count, causing a BUG().

So take care to re-enable IRQs when handling any EFI page faults if they
were taken with IRQs enabled.

[0] https://sashiko.dev/#/patchset/20260430074107.27051-1-ivan.hu%40canonical.com

Cc: Eric Biggers &lt;ebiggers@kernel.org&gt;
Cc: Ivan Hu &lt;ivan.hu@canonical.com&gt;
Cc: x86@kernel.org
Cc: &lt;stable@vger.kernel.org&gt;
Fixes: d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")
Reviewed-by: Eric Biggers &lt;ebiggers@kernel.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>x86/efi: Fix graceful fault handling after FPU softirq changes</title>
<updated>2026-05-04T10:41:51+00:00</updated>
<author>
<name>Ivan Hu</name>
<email>ivan.hu@canonical.com</email>
</author>
<published>2026-04-30T07:41:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=088f65e206087bf903743bd18417261d7a4c9644'/>
<id>088f65e206087bf903743bd18417261d7a4c9644</id>
<content type='text'>
Since commit d02198550423 ("x86/fpu: Improve crypto performance by
making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin()
calls fpregs_lock() which uses local_bh_disable() instead of the
previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count
during the entire EFI runtime service call, causing in_interrupt() to
return true in normal task context.

The graceful page fault handler efi_crash_gracefully_on_page_fault()
uses in_interrupt() to bail out for faults in real interrupt context.
With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI
firmware page faults unhandled. This escalates to die() which also sees
in_interrupt() as true and calls panic("Fatal exception in interrupt"),
resulting in a hard system freeze. On systems with buggy firmware that
triggers page faults during EFI runtime calls (e.g., accessing unmapped
memory in GetTime()), this causes an unrecoverable hang instead of the
expected graceful EFI_ABORTED recovery.

Fix by replacing in_interrupt() with !in_task(). This preserves the
original intent of bailing for interrupts or NMI faults, while no longer
falsely triggering from the FPU code path's local_bh_disable().

Fixes: d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Ivan Hu &lt;ivan.hu@canonical.com&gt;
[ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a
       window where a softirq may be taken before fpregs_lock() is
       called, but after efi_rts_work.efi_rts_id has been assigned,
       and any page faults occurring in that window will then be
       misidentified as having been caused by the firmware. Instead,
       use !in_task(), which incorporates in_serving_softirq(). ]
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Since commit d02198550423 ("x86/fpu: Improve crypto performance by
making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin()
calls fpregs_lock() which uses local_bh_disable() instead of the
previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count
during the entire EFI runtime service call, causing in_interrupt() to
return true in normal task context.

The graceful page fault handler efi_crash_gracefully_on_page_fault()
uses in_interrupt() to bail out for faults in real interrupt context.
With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI
firmware page faults unhandled. This escalates to die() which also sees
in_interrupt() as true and calls panic("Fatal exception in interrupt"),
resulting in a hard system freeze. On systems with buggy firmware that
triggers page faults during EFI runtime calls (e.g., accessing unmapped
memory in GetTime()), this causes an unrecoverable hang instead of the
expected graceful EFI_ABORTED recovery.

Fix by replacing in_interrupt() with !in_task(). This preserves the
original intent of bailing for interrupts or NMI faults, while no longer
falsely triggering from the FPU code path's local_bh_disable().

Fixes: d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Ivan Hu &lt;ivan.hu@canonical.com&gt;
[ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a
       window where a softirq may be taken before fpregs_lock() is
       called, but after efi_rts_work.efi_rts_id has been assigned,
       and any page faults occurring in that window will then be
       misidentified as having been caused by the firmware. Instead,
       use !in_task(), which incorporates in_serving_softirq(). ]
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock</title>
<updated>2026-04-18T18:29:14+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-04-18T18:29:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9055c64567e9fc2a58d9382205bf3082f7bea141'/>
<id>9055c64567e9fc2a58d9382205bf3082f7bea141</id>
<content type='text'>
Pull memblock updates from Mike Rapoport:

 - improve debuggability of reserve_mem kernel parameter handling with
   print outs in case of a failure and debugfs info showing what was
   actually reserved

 - Make memblock_free_late() and free_reserved_area() use the same core
   logic for freeing the memory to buddy and ensure it takes care of
   updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.

* tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  x86/alternative: delay freeing of smp_locks section
  memblock: warn when freeing reserved memory before memory map is initialized
  memblock, treewide: make memblock_free() handle late freeing
  memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y
  memblock: extract page freeing from free_reserved_area() into a helper
  memblock: make free_reserved_area() more robust
  mm: move free_reserved_area() to mm/memblock.c
  powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact()
  powerpc: fadump: pair alloc_pages_exact() with free_pages_exact()
  memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name()
  memblock: move reserve_bootmem_range() to memblock.c and make it static
  memblock: Add reserve_mem debugfs info
  memblock: Print out errors on reserve_mem parser
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull memblock updates from Mike Rapoport:

 - improve debuggability of reserve_mem kernel parameter handling with
   print outs in case of a failure and debugfs info showing what was
   actually reserved

 - Make memblock_free_late() and free_reserved_area() use the same core
   logic for freeing the memory to buddy and ensure it takes care of
   updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.

* tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  x86/alternative: delay freeing of smp_locks section
  memblock: warn when freeing reserved memory before memory map is initialized
  memblock, treewide: make memblock_free() handle late freeing
  memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y
  memblock: extract page freeing from free_reserved_area() into a helper
  memblock: make free_reserved_area() more robust
  mm: move free_reserved_area() to mm/memblock.c
  powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact()
  powerpc: fadump: pair alloc_pages_exact() with free_pages_exact()
  memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name()
  memblock: move reserve_bootmem_range() to memblock.c and make it static
  memblock: Add reserve_mem debugfs info
  memblock: Print out errors on reserve_mem parser
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity</title>
<updated>2026-04-17T22:42:01+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-04-17T22:42:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9cdca336677b4d15579ec462e33c8a330ab3a9de'/>
<id>9cdca336677b4d15579ec462e33c8a330ab3a9de</id>
<content type='text'>
Pull integrity updates from Mimi Zohar:
 "There are two main changes, one feature removal, some code cleanup,
  and a number of bug fixes.

  Main changes:
   - Detecting secure boot mode was limited to IMA. Make detecting
     secure boot mode accessible to EVM and other LSMs
   - IMA sigv3 support was limited to fsverity. Add IMA sigv3 support
     for IMA regular file hashes and EVM portable signatures

  Remove:
   - Remove IMA support for asychronous hash calculation originally
     added for hardware acceleration

  Cleanup:
   - Remove unnecessary Kconfig CONFIG_MODULE_SIG and CONFIG_KEXEC_SIG
     tests
   - Add descriptions of the IMA atomic flags

  Bug fixes:
   - Like IMA, properly limit EVM "fix" mode
   - Define and call evm_fix_hmac() to update security.evm
   - Fallback to using i_version to detect file change for filesystems
     that do not support STATX_CHANGE_COOKIE
   - Address missing kernel support for configured (new) TPM hash
     algorithms
   - Add missing crypto_shash_final() return value"

* tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  evm: Enforce signatures version 3 with new EVM policy 'bit 3'
  integrity: Allow sigv3 verification on EVM_XATTR_PORTABLE_DIGSIG
  ima: add support to require IMA sigv3 signatures
  ima: add regular file data hash signature version 3 support
  ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures
  ima: remove buggy support for asynchronous hashes
  integrity: Eliminate weak definition of arch_get_secureboot()
  ima: Add code comments to explain IMA iint cache atomic_flags
  ima_fs: Correctly create securityfs files for unsupported hash algos
  ima: check return value of crypto_shash_final() in boot aggregate
  ima: Define and use a digest_size field in the ima_algo_desc structure
  powerpc/ima: Drop unnecessary check for CONFIG_MODULE_SIG
  ima: efi: Drop unnecessary check for CONFIG_MODULE_SIG/CONFIG_KEXEC_SIG
  ima: fallback to using i_version to detect file change
  evm: fix security.evm for a file with IMA signature
  s390: Drop unnecessary CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
  evm: Don't enable fix mode when secure boot is enabled
  integrity: Make arch_ima_get_secureboot integrity-wide
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull integrity updates from Mimi Zohar:
 "There are two main changes, one feature removal, some code cleanup,
  and a number of bug fixes.

  Main changes:
   - Detecting secure boot mode was limited to IMA. Make detecting
     secure boot mode accessible to EVM and other LSMs
   - IMA sigv3 support was limited to fsverity. Add IMA sigv3 support
     for IMA regular file hashes and EVM portable signatures

  Remove:
   - Remove IMA support for asychronous hash calculation originally
     added for hardware acceleration

  Cleanup:
   - Remove unnecessary Kconfig CONFIG_MODULE_SIG and CONFIG_KEXEC_SIG
     tests
   - Add descriptions of the IMA atomic flags

  Bug fixes:
   - Like IMA, properly limit EVM "fix" mode
   - Define and call evm_fix_hmac() to update security.evm
   - Fallback to using i_version to detect file change for filesystems
     that do not support STATX_CHANGE_COOKIE
   - Address missing kernel support for configured (new) TPM hash
     algorithms
   - Add missing crypto_shash_final() return value"

* tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  evm: Enforce signatures version 3 with new EVM policy 'bit 3'
  integrity: Allow sigv3 verification on EVM_XATTR_PORTABLE_DIGSIG
  ima: add support to require IMA sigv3 signatures
  ima: add regular file data hash signature version 3 support
  ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures
  ima: remove buggy support for asynchronous hashes
  integrity: Eliminate weak definition of arch_get_secureboot()
  ima: Add code comments to explain IMA iint cache atomic_flags
  ima_fs: Correctly create securityfs files for unsupported hash algos
  ima: check return value of crypto_shash_final() in boot aggregate
  ima: Define and use a digest_size field in the ima_algo_desc structure
  powerpc/ima: Drop unnecessary check for CONFIG_MODULE_SIG
  ima: efi: Drop unnecessary check for CONFIG_MODULE_SIG/CONFIG_KEXEC_SIG
  ima: fallback to using i_version to detect file change
  evm: fix security.evm for a file with IMA signature
  s390: Drop unnecessary CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
  evm: Don't enable fix mode when secure boot is enabled
  integrity: Make arch_ima_get_secureboot integrity-wide
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip</title>
<updated>2026-04-14T21:24:45+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-04-14T21:24:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9f2bb6c7b364f186aa37c524f6df33bd488d4efa'/>
<id>9f2bb6c7b364f186aa37c524f6df33bd488d4efa</id>
<content type='text'>
Pull x86 cpu updates from Dave Hansen:

 - Complete LASS enabling: deal with vsyscall and EFI

   The existing Linear Address Space Separation (LASS) support punted
   on support for common EFI and vsyscall configs. Complete the
   implementation by supporting EFI and vsyscall=xonly.

 - Clean up CPUID usage in newer Intel "avs" audio driver and update the
   x86-cpuid-db file

* tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.0
  ASoC: Intel: avs: Include CPUID header at file scope
  ASoC: Intel: avs: Check maximum valid CPUID leaf
  x86/cpu: Remove LASS restriction on vsyscall emulation
  x86/vsyscall: Disable LASS if vsyscall mode is set to EMULATE
  x86/vsyscall: Restore vsyscall=xonly mode under LASS
  x86/traps: Consolidate user fixups in the #GP handler
  x86/vsyscall: Reorganize the page fault emulation code
  x86/cpu: Remove LASS restriction on EFI
  x86/efi: Disable LASS while executing runtime services
  x86/cpu: Defer LASS enabling until userspace comes up
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull x86 cpu updates from Dave Hansen:

 - Complete LASS enabling: deal with vsyscall and EFI

   The existing Linear Address Space Separation (LASS) support punted
   on support for common EFI and vsyscall configs. Complete the
   implementation by supporting EFI and vsyscall=xonly.

 - Clean up CPUID usage in newer Intel "avs" audio driver and update the
   x86-cpuid-db file

* tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.0
  ASoC: Intel: avs: Include CPUID header at file scope
  ASoC: Intel: avs: Check maximum valid CPUID leaf
  x86/cpu: Remove LASS restriction on vsyscall emulation
  x86/vsyscall: Disable LASS if vsyscall mode is set to EMULATE
  x86/vsyscall: Restore vsyscall=xonly mode under LASS
  x86/traps: Consolidate user fixups in the #GP handler
  x86/vsyscall: Reorganize the page fault emulation code
  x86/cpu: Remove LASS restriction on EFI
  x86/efi: Disable LASS while executing runtime services
  x86/cpu: Defer LASS enabling until userspace comes up
</pre>
</div>
</content>
</entry>
<entry>
<title>memblock, treewide: make memblock_free() handle late freeing</title>
<updated>2026-04-01T08:20:15+00:00</updated>
<author>
<name>Mike Rapoport (Microsoft)</name>
<email>rppt@kernel.org</email>
</author>
<published>2026-03-23T07:48:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=87ce9e83ab8be5daf64351cd481ffa6537778e6b'/>
<id>87ce9e83ab8be5daf64351cd481ffa6537778e6b</id>
<content type='text'>
It shouldn't be responsibility of memblock users to detect if they free
memory allocated from memblock late and should use memblock_free_late().

Make memblock_free() and memblock_phys_free() take care of late memory
freeing and drop memblock_free_late().

Link: https://patch.msgid.link/20260323074836.3653702-9-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) &lt;rppt@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
It shouldn't be responsibility of memblock users to detect if they free
memory allocated from memblock late and should use memblock_free_late().

Make memblock_free() and memblock_phys_free() take care of late memory
freeing and drop memblock_free_late().

Link: https://patch.msgid.link/20260323074836.3653702-9-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) &lt;rppt@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>x86/platform/geode: Fix on-stack property data use-after-return bug</title>
<updated>2026-03-31T07:55:26+00:00</updated>
<author>
<name>Dmitry Torokhov</name>
<email>dmitry.torokhov@gmail.com</email>
</author>
<published>2026-03-30T02:27:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b981e9e94c687b7b19ae8820963f005b842cb2f2'/>
<id>b981e9e94c687b7b19ae8820963f005b842cb2f2</id>
<content type='text'>
The PROPERTY_ENTRY_GPIO macro (and by extension PROPERTY_ENTRY_REF)
creates a temporary software_node_ref_args structure on the stack
when used in a runtime assignment. This results in the property
pointing to data that is invalid once the function returns.

Fix this by ensuring the GPIO reference data is not stored on stack and
using PROPERTY_ENTRY_REF_ARRAY_LEN() to point directly to the persistent
reference data.

Fixes: 298c9babadb8 ("x86/platform/geode: switch GPIO buttons and LEDs to software properties")
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
Cc: Rafael J. Wysocki &lt;rafael@kernel.org&gt;
Cc: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Cc: Daniel Scally &lt;djrscally@gmail.com&gt;
Cc: Danilo Krummrich &lt;dakr@kernel.org&gt;
Cc: Hans de Goede &lt;hansg@kernel.org&gt;
Cc: Heikki Krogerus &lt;heikki.krogerus@linux.intel.com&gt;
Cc: Sakari Ailus &lt;sakari.ailus@linux.intel.com&gt;
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260329-property-gpio-fix-v2-1-3cca5ba136d8@gmail.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The PROPERTY_ENTRY_GPIO macro (and by extension PROPERTY_ENTRY_REF)
creates a temporary software_node_ref_args structure on the stack
when used in a runtime assignment. This results in the property
pointing to data that is invalid once the function returns.

Fix this by ensuring the GPIO reference data is not stored on stack and
using PROPERTY_ENTRY_REF_ARRAY_LEN() to point directly to the persistent
reference data.

Fixes: 298c9babadb8 ("x86/platform/geode: switch GPIO buttons and LEDs to software properties")
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
Cc: Rafael J. Wysocki &lt;rafael@kernel.org&gt;
Cc: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Cc: Daniel Scally &lt;djrscally@gmail.com&gt;
Cc: Danilo Krummrich &lt;dakr@kernel.org&gt;
Cc: Hans de Goede &lt;hansg@kernel.org&gt;
Cc: Heikki Krogerus &lt;heikki.krogerus@linux.intel.com&gt;
Cc: Sakari Ailus &lt;sakari.ailus@linux.intel.com&gt;
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260329-property-gpio-fix-v2-1-3cca5ba136d8@gmail.com
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'efi-fixes-for-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi</title>
<updated>2026-03-27T22:55:25+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-03-27T22:55:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=56bea424158f6b99a452ab9410092d72b03f8545'/>
<id>56bea424158f6b99a452ab9410092d72b03f8545</id>
<content type='text'>
Pull EFI fix from Ard Biesheuvel:
 "Fix a potential buffer overrun issue introduced by the previous fix
  for EFI boot services region reservations on x86"

* tag 'efi-fixes-for-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efi: efi_unmap_boot_services: fix calculation of ranges_to_free size
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull EFI fix from Ard Biesheuvel:
 "Fix a potential buffer overrun issue introduced by the previous fix
  for EFI boot services region reservations on x86"

* tag 'efi-fixes-for-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efi: efi_unmap_boot_services: fix calculation of ranges_to_free size
</pre>
</div>
</content>
</entry>
<entry>
<title>x86/efi: efi_unmap_boot_services: fix calculation of ranges_to_free size</title>
<updated>2026-03-20T14:31:10+00:00</updated>
<author>
<name>Mike Rapoport (Microsoft)</name>
<email>rppt@kernel.org</email>
</author>
<published>2026-03-20T13:59:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=217c0a5c177a3d4f7c8497950cbf5c36756e8bbb'/>
<id>217c0a5c177a3d4f7c8497950cbf5c36756e8bbb</id>
<content type='text'>
ranges_to_free array should have enough room to store the entire EFI
memmap plus an extra element for NULL entry.
The calculation of this array size wrongly adds 1 to the overall size
instead of adding 1 to the number of elements.

Add parentheses to properly size the array.

Reported-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Fixes: a4b0bf6a40f3 ("x86/efi: defer freeing of boot services memory")
Signed-off-by: Mike Rapoport (Microsoft) &lt;rppt@kernel.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
ranges_to_free array should have enough room to store the entire EFI
memmap plus an extra element for NULL entry.
The calculation of this array size wrongly adds 1 to the overall size
instead of adding 1 to the number of elements.

Add parentheses to properly size the array.

Reported-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Fixes: a4b0bf6a40f3 ("x86/efi: defer freeing of boot services memory")
Signed-off-by: Mike Rapoport (Microsoft) &lt;rppt@kernel.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'efi-fixes-for-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi</title>
<updated>2026-03-08T19:13:09+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-03-08T19:13:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=fc9f248d8c591454e257edd54ac4085d84f11e6a'/>
<id>fc9f248d8c591454e257edd54ac4085d84f11e6a</id>
<content type='text'>
Pull EFI fix from Ard Biesheuvel:
 "Fix for the x86 EFI workaround keeping boot services code and data
  regions reserved until after SetVirtualAddressMap() completes:
  deferred struct page initialization may result in some of this memory
  being lost permanently"

* tag 'efi-fixes-for-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efi: defer freeing of boot services memory
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull EFI fix from Ard Biesheuvel:
 "Fix for the x86 EFI workaround keeping boot services code and data
  regions reserved until after SetVirtualAddressMap() completes:
  deferred struct page initialization may result in some of this memory
  being lost permanently"

* tag 'efi-fixes-for-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efi: defer freeing of boot services memory
</pre>
</div>
</content>
</entry>
</feed>
