linux.git/arch/x86/pci, branch master Linux kernel source tree PCI: Align head space better 2026-03-27T15:19:08+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2026-03-24T16:56:32+00:00 9036bd0efcb6162a77f3bf9bacbafba7686c7275 When a bridge window contains big and small resource(s), the small resource(s) may not amount to the half of the size of the big resource which would allow calculate_head_align() to shrink the head alignment. This results in always placing the small resource(s) after the big resource. In general, it would be good to be able to place the small resource(s) before the big resource to achieve better utilization of the address space. In the cases where the large resource can only fit at the end of the window, it is even required. However, carrying the information over from pbus_size_mem() and calculate_head_align() to __pci_assign_resource() and pcibios_align_resource() is not easy with the current data structures. A somewhat hacky way to move the non-aligning tail part to the head is possible within pcibios_align_resource(). The free space between the start of the free space span and the aligned start address can be compared with the non-aligning remainder of the size. If the free space is larger than the remainder, placing the remainder before the start address is possible. This relocation should generally work, because PCI resources consist only power-of-2 atoms. Various arch requirements may still need to override the relocation, so the relocation is only applied selectively in such cases. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Xifer <xiferdev@gmail.com> Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com 
When a bridge window contains big and small resource(s), the small
resource(s) may not amount to the half of the size of the big resource
which would allow calculate_head_align() to shrink the head alignment.
This results in always placing the small resource(s) after the big
resource.

In general, it would be good to be able to place the small resource(s)
before the big resource to achieve better utilization of the address space.
In the cases where the large resource can only fit at the end of the
window, it is even required.

However, carrying the information over from pbus_size_mem() and
calculate_head_align() to __pci_assign_resource() and
pcibios_align_resource() is not easy with the current data structures.

A somewhat hacky way to move the non-aligning tail part to the head is
possible within pcibios_align_resource(). The free space between the start
of the free space span and the aligned start address can be compared with
the non-aligning remainder of the size. If the free space is larger than
the remainder, placing the remainder before the start address is possible.
This relocation should generally work, because PCI resources consist only
power-of-2 atoms.

Various arch requirements may still need to override the relocation, so the
relocation is only applied selectively in such cases.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com
resource: Pass full extent of empty space to resource_alignf callback 2026-03-27T15:18:39+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2026-03-24T16:56:25+00:00 f699bcc8bcdf99565928a7b1fc7ee656f6c81815 __find_resource_space() calculates the full extent of empty space but only passes the aligned space to resource_alignf callback. In some situations, the callback may choose take advantage of the free space before the requested alignment. Pass the full extent of the calculated empty space to resource_alignf callback as an additional parameter. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Xifer <xiferdev@gmail.com> Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com 
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.

Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T00:37:42+00:00 bf4afc53b77aeaa48b5409da5c8da6bb4eff7f43 This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21T09:02:28+00:00 Kees Cook kees@kernel.org 2026-02-21T07:49:23+00:00 69050f8d6d075dc01af7a5f2f550a8067510366f This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> 
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
PCI: Add Extended Tag + MRRS quirk for Xeon 6 2025-08-11T20:00:51+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2025-06-10T11:48:02+00:00 a22250fe933dbd1da9a9683506ae3f489ccc579d When bifurcated to x2, Xeon 6 Root Port performance is sensitive to the configuration of Extended Tags, Max Read Request Size (MRRS), and 10-Bit Tag Requester (note: there is currently no 10-Bit Tag support in the kernel). While those can be configured to the recommended values by FW, kernel may decide to overwrite the initial values. Add a quirk that disallows enabling Extended Tags and setting MRRS larger than 128B for devices under Xeon 6 Root Ports if the Root Port is bifurcated to x2. Use the host bridge's enable_device hook to overwrite MRRS if it's set to >128B for the device to be enabled. The earlier attempts to implement this quirk polluted PCI core code with the checks necessary to support this quirk. Using the enable_device hook keeps the quirk well-contained, away from the PCI core code. Suggested-by: Lukas Wunner <lukas@wunner.de> Link: https://cdrdv2.intel.com/v1/dl/getContent/837176 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: 2x -> x2, rename quirk] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/20250610114802.7460-1-ilpo.jarvinen@linux.intel.com 
When bifurcated to x2, Xeon 6 Root Port performance is sensitive to the
configuration of Extended Tags, Max Read Request Size (MRRS), and 10-Bit
Tag Requester (note: there is currently no 10-Bit Tag support in the
kernel). While those can be configured to the recommended values by FW,
kernel may decide to overwrite the initial values.

Add a quirk that disallows enabling Extended Tags and setting MRRS
larger than 128B for devices under Xeon 6 Root Ports if the Root Port
is bifurcated to x2. Use the host bridge's enable_device hook to
overwrite MRRS if it's set to >128B for the device to be enabled.

The earlier attempts to implement this quirk polluted PCI core code with
the checks necessary to support this quirk. Using the enable_device hook
keeps the quirk well-contained, away from the PCI core code.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://cdrdv2.intel.com/v1/dl/getContent/837176
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: 2x -> x2, rename quirk]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250610114802.7460-1-ilpo.jarvinen@linux.intel.com
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci 2025-06-04T18:26:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-06-04T18:26:17+00:00 3719a04a80caf660f899a462cd8f3973bcfa676e Pull pci updates from Bjorn Helgaas: "Enumeration: - Print the actual delay time in pci_bridge_wait_for_secondary_bus() instead of assuming it was 1000ms (Wilfred Mallawa) - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices', which broke resume from system sleep on AMD platforms and has been fixed by other commits (Lukas Wunner) Resource management: - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and unnecessary (Philipp Stanner) - Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and related flags since all uses have been removed (Philipp Stanner) - Rework devres 'request' functions so they are no longer 'hybrid', i.e., their behavior no longer depends on whether pcim_enable_device or pci_enable_device() was used, and remove related code (Philipp Stanner) - Warn (not BUG()) about failure to assign optional resources (Ilpo Järvinen) Error handling: - Log the DPC Error Source ID only when it's actually valid (when ERR_FATAL or ERR_NONFATAL was received from a downstream device) and decode into bus/device/function (Bjorn Helgaas) - Determine AER log level once and save it so all related messages use the same level (Karolina Stolarek) - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable Errors (Karolina Stolarek) - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs controls on interval and burst count, to avoid flooding logs and RCU stall warnings (Jon Pan-Doh) Power management: - Increment PM usage counter when probing reset methods so we don't try to read config space of a powered-off device (Alex Williamson) - Set all devices to D0 during enumeration to ensure ACPI opregion is connected via _REG (Mario Limonciello) Power control: - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the filename paths. Retain old deprecated symbols for compatibility, except for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold) - When unregistering pwrctrl, cancel outstanding rescan work before cleaning up data structures to avoid use-after-free issues (Brian Norris) Bandwidth control: - Simplify link bandwidth controller by replacing the count of Link Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag (Ilpo Järvinen) - Update the Link Speed after retraining, since the Link Speed may have changed (Ilpo Järvinen) PCIe native device hotplug: - Ignore Presence Detect Changed caused by DPC. pciehp already ignores Link Down/Up events caused by DPC, but on slots using in-band presence detect, DPC causes a spurious Presence Detect Changed event (Lukas Wunner) - Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports using in-band presence detect, the reset causes a Presence Detect Changed event, which mistakenly caused teardown and re-enumeration of the device. Drivers may need to annotate code that resets their device (Lukas Wunner) Virtualization: - Add an ACS quirk for Loongson Root Ports that don't advertise ACS but don't allow peer-to-peer transactions between Root Ports; the quirk allows each Root Port to be in a separate IOMMU group (Huacai Chen) Endpoint framework: - For fixed-size BARs, retain both the actual size and the possibly larger size allocated to accommodate iATU alignment requirements (Jerome Brunet) - Simplify ctrl/SPAD space allocation and avoid allocating more space than needed (Jerome Brunet) - Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint controllers (Niklas Cassel) - Align the return value (number of interrupts) encoding for pci_epc_get_msi()/pci_epc_ops::get_msi() and pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel) - Align the nr_irqs parameter encoding for pci_epc_set_msi()/pci_epc_ops::set_msi() and pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel) Common host controller library: - Convert pci-host-common to a library so platforms that don't need native host controller drivers don't need to include these helper functions (Manivannan Sadhasivam) Apple PCIe controller driver: - Extract ECAM bridge creation helper from pci_host_common_probe() to separate driver-specific things like MSI from PCI things (Marc Zyngier) - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying capabilities (Marc Zyngier) - Skip ports disabled in DT when setting up ports (Janne Grunau) - Add t6020 compatible string (Alyssa Rosenzweig) - Add T602x PCIe support (Hector Martin) - Directly set/clear INTx mask bits because T602x dropped the accessors that could do this without locking (Marc Zyngier) - Move port PHY registers to their own reg items to accommodate T602x, which moves them around; retain default offsets for existing DTs that lack phy%d entries with the reg offsets (Hector Martin) - Stop polling for core refclk, which doesn't work on T602x and the bootloader has already done anyway (Hector Martin) - Use gpiod_set_value_cansleep() when asserting PERST# in probe because we're allowed to sleep there (Hector Martin) Cadence PCIe controller driver: - Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans Zhang) - Make the cadence core buildable as a module (Kishon Vijay Abraham I) - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by loadable drivers when they are removed (Siddharth Vadapalli) Freescale i.MX6 PCIe controller driver: - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard Zhu) - Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link(); since the DWC core does this, imx6 only needs it when retraining for a faster link speed (Richard Zhu) - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu) - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some cases, the controller can't exit 'L23 Ready' through Beacon or PERST# deassertion (Richard Zhu) - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum: controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s, causing timeouts in L1 (Richard Zhu) - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu) - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu) Mobiveil PCIe controller driver: - Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans Zhang) NVIDIA Tegra194 PCIe controller driver: - Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM is enabled, since there are no other entries (Hans Zhang) Qualcomm PCIe controller driver: - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane equalization presets (Krishna Chaitanya Chundru) - Read Maximum Link Width from the Link Capabilities register if DT lacks 'num-lanes' property (Krishna Chaitanya Chundru) - Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru) - Add generic dwc support for configuring lane equalization presets (Krishna Chaitanya Chundru) - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar) Renesas R-Car PCIe controller driver: - Describe endpoint BAR 4 as being fixed size (Jerome Brunet) - Document how to obtain R-Car V4H (r8a779g0) controller firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert() deasserts in reverse order, to fix a link training regression (Jensen Huang) - Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel) Rockchip DesignWare PCIe controller driver: - Check only PCIE_LINKUP, not LTSSM status, to determine whether the link is up (Shawn Lin) - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root Complex and Endpoint modes (Shawn Lin) - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets non-sticky registers (Shawn Lin) - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit() (Diederik de Haas) Synopsys DesignWare PCIe controller driver: - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more robust; this will not affect the intended link width if all lanes are functional (Wenbin Yao) - Return bool (not int) for link-up check in dw_pcie_ops.link_up() and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti (Hans Zhang) - Add debugfs support for exposing DWC device-specific PTM context (Manivannan Sadhasivam) TI J721E PCIe driver: - Make j721e buildable as a loadable and removable module (Siddharth Vadapalli) - Fix j721e host/endpoint dependencies that result in link failures in some configs (Arnd Bergmann) Device tree bindings: - Add qcom DT binding for 'global' interrupt (PCIe controller and link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p, sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan Sadhasivam) - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074, ipq8074-gen3, ipq6018 (Manivannan Sadhasivam) - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang) - Correct indentation and style of examples in brcm,stb-pcie, cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie, microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm (Krzysztof Kozlowski) - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and armada8k from text to schema DT bindings (Rob Herring) - Remove obsolete .txt DT bindings for content that has been moved to schemas (Rob Herring) - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074 and IPQ9574 (Varadarajan Narayanan) - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring) - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since PolarFire may be configured that way (Conor Dooley) Miscellaneous: - Drop 'pci' suffix from intel_mid_pci.c filename to match similar files (Andy Shevchenko) - All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU to simplify build testing and avoid inadvertent build regressions (Arnd Bergmann) - Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof Wilczyński) - Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan Sadhasivam)" * tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits) MAINTAINERS: Update Manivannan Sadhasivam email address PCI: j721e: Fix host/endpoint dependencies PCI: j721e: Add support to build as a loadable module PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup PCI: cadence: Add support to build pcie-cadence library as a kernel module MAINTAINERS: Update Krzysztof Wilczyński email address PCI: Remove unnecessary linesplit in __pci_setup_bridge() PCI: WARN (not BUG()) when we fail to assign optional resources PCI: Remove unused pci_printk() PCI: qcom: Replace PERST# sleep time with proper macro PCI: dw-rockchip: Replace PERST# sleep time with proper macro PCI: host-common: Convert to library for host controller drivers PCI/ERR: Remove misleading TODO regarding kernel panic PCI: cadence: Remove duplicate message code definitions PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding PCI: cadence-ep: Correct PBA offset in .set_msix() callback ... 
Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Print the actual delay time in pci_bridge_wait_for_secondary_bus()
     instead of assuming it was 1000ms (Wilfred Mallawa)

   - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
     devices', which broke resume from system sleep on AMD platforms and
     has been fixed by other commits (Lukas Wunner)

  Resource management:

   - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
     and unnecessary (Philipp Stanner)

   - Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
     and related flags since all uses have been removed (Philipp
     Stanner)

   - Rework devres 'request' functions so they are no longer 'hybrid',
     i.e., their behavior no longer depends on whether
     pcim_enable_device or pci_enable_device() was used, and remove
     related code (Philipp Stanner)

   - Warn (not BUG()) about failure to assign optional resources (Ilpo
     Järvinen)

  Error handling:

   - Log the DPC Error Source ID only when it's actually valid (when
     ERR_FATAL or ERR_NONFATAL was received from a downstream device)
     and decode into bus/device/function (Bjorn Helgaas)

   - Determine AER log level once and save it so all related messages
     use the same level (Karolina Stolarek)

   - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
     Errors (Karolina Stolarek)

   - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
     controls on interval and burst count, to avoid flooding logs and
     RCU stall warnings (Jon Pan-Doh)

  Power management:

   - Increment PM usage counter when probing reset methods so we don't
     try to read config space of a powered-off device (Alex Williamson)

   - Set all devices to D0 during enumeration to ensure ACPI opregion is
     connected via _REG (Mario Limonciello)

  Power control:

   - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
     the filename paths. Retain old deprecated symbols for
     compatibility, except for the pwrctrl slot driver
     (PCI_PWRCTRL_SLOT) (Johan Hovold)

   - When unregistering pwrctrl, cancel outstanding rescan work before
     cleaning up data structures to avoid use-after-free issues (Brian
     Norris)

  Bandwidth control:

   - Simplify link bandwidth controller by replacing the count of Link
     Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
     flag (Ilpo Järvinen)

   - Update the Link Speed after retraining, since the Link Speed may
     have changed (Ilpo Järvinen)

  PCIe native device hotplug:

   - Ignore Presence Detect Changed caused by DPC.

     pciehp already ignores Link Down/Up events caused by DPC, but on
     slots using in-band presence detect, DPC causes a spurious Presence
     Detect Changed event (Lukas Wunner)

   - Ignore Link Down/Up caused by Secondary Bus Reset.

     On hotplug ports using in-band presence detect, the reset causes a
     Presence Detect Changed event, which mistakenly caused teardown and
     re-enumeration of the device. Drivers may need to annotate code
     that resets their device (Lukas Wunner)

  Virtualization:

   - Add an ACS quirk for Loongson Root Ports that don't advertise ACS
     but don't allow peer-to-peer transactions between Root Ports; the
     quirk allows each Root Port to be in a separate IOMMU group (Huacai
     Chen)

  Endpoint framework:

   - For fixed-size BARs, retain both the actual size and the possibly
     larger size allocated to accommodate iATU alignment requirements
     (Jerome Brunet)

   - Simplify ctrl/SPAD space allocation and avoid allocating more space
     than needed (Jerome Brunet)

   - Correct MSI-X PBA offset calculations for DesignWare and Cadence
     endpoint controllers (Niklas Cassel)

   - Align the return value (number of interrupts) encoding for
     pci_epc_get_msi()/pci_epc_ops::get_msi() and
     pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)

   - Align the nr_irqs parameter encoding for
     pci_epc_set_msi()/pci_epc_ops::set_msi() and
     pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)

  Common host controller library:

   - Convert pci-host-common to a library so platforms that don't need
     native host controller drivers don't need to include these helper
     functions (Manivannan Sadhasivam)

  Apple PCIe controller driver:

   - Extract ECAM bridge creation helper from pci_host_common_probe() to
     separate driver-specific things like MSI from PCI things (Marc
     Zyngier)

   - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
     varying capabilities (Marc Zyngier)

   - Skip ports disabled in DT when setting up ports (Janne Grunau)

   - Add t6020 compatible string (Alyssa Rosenzweig)

   - Add T602x PCIe support (Hector Martin)

   - Directly set/clear INTx mask bits because T602x dropped the
     accessors that could do this without locking (Marc Zyngier)

   - Move port PHY registers to their own reg items to accommodate
     T602x, which moves them around; retain default offsets for existing
     DTs that lack phy%d entries with the reg offsets (Hector Martin)

   - Stop polling for core refclk, which doesn't work on T602x and the
     bootloader has already done anyway (Hector Martin)

   - Use gpiod_set_value_cansleep() when asserting PERST# in probe
     because we're allowed to sleep there (Hector Martin)

  Cadence PCIe controller driver:

   - Drop a runtime PM 'put' to resolve a runtime atomic count underflow
     (Hans Zhang)

   - Make the cadence core buildable as a module (Kishon Vijay Abraham I)

   - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
     loadable drivers when they are removed (Siddharth Vadapalli)

  Freescale i.MX6 PCIe controller driver:

   - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
     (Richard Zhu)

   - Remove redundant dw_pcie_wait_for_link() from
     imx_pcie_start_link(); since the DWC core does this, imx6 only
     needs it when retraining for a faster link speed (Richard Zhu)

   - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)

   - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
     some cases, the controller can't exit 'L23 Ready' through Beacon or
     PERST# deassertion (Richard Zhu)

   - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
     controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
     GT/s, causing timeouts in L1 (Richard Zhu)

   - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)

   - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)

  Mobiveil PCIe controller driver:

   - Return bool (not int) for link-up check in
     mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
     Zhang)

  NVIDIA Tegra194 PCIe controller driver:

   - Create debugfs directory for 'aspm_state_cnt' only when
     CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
     Zhang)

  Qualcomm PCIe controller driver:

   - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
     equalization presets (Krishna Chaitanya Chundru)

   - Read Maximum Link Width from the Link Capabilities register if DT
     lacks 'num-lanes' property (Krishna Chaitanya Chundru)

   - Add Physical Layer 64 GT/s Capability ID and register offsets for
     8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
     Chundru)

   - Add generic dwc support for configuring lane equalization presets
     (Krishna Chaitanya Chundru)

   - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)

  Renesas R-Car PCIe controller driver:

   - Describe endpoint BAR 4 as being fixed size (Jerome Brunet)

   - Document how to obtain R-Car V4H (r8a779g0) controller firmware
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Reorder rockchip_pci_core_rsts because
     reset_control_bulk_deassert() deasserts in reverse order, to fix a
     link training regression (Jensen Huang)

   - Mark RK3399 as being capable of raising INTx interrupts (Niklas
     Cassel)

  Rockchip DesignWare PCIe controller driver:

   - Check only PCIE_LINKUP, not LTSSM status, to determine whether the
     link is up (Shawn Lin)

   - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
     for Root Complex and Endpoint modes (Shawn Lin)

   - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
     of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
     resets non-sticky registers (Shawn Lin)

   - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
     (Diederik de Haas)

  Synopsys DesignWare PCIe controller driver:

   - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
     more robust; this will not affect the intended link width if all
     lanes are functional (Wenbin Yao)

   - Return bool (not int) for link-up check in dw_pcie_ops.link_up()
     and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
     keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
     tegra194, uniphier, visconti (Hans Zhang)

   - Add debugfs support for exposing DWC device-specific PTM context
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Make j721e buildable as a loadable and removable module (Siddharth
     Vadapalli)

   - Fix j721e host/endpoint dependencies that result in link failures
     in some configs (Arnd Bergmann)

  Device tree bindings:

   - Add qcom DT binding for 'global' interrupt (PCIe controller and
     link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
     sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
     Sadhasivam)

   - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
     ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)

   - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)

   - Correct indentation and style of examples in brcm,stb-pcie,
     cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
     microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
     (Krzysztof Kozlowski)

   - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
     armada8k from text to schema DT bindings (Rob Herring)

   - Remove obsolete .txt DT bindings for content that has been moved to
     schemas (Rob Herring)

   - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
     and IPQ9574 (Varadarajan Narayanan)

   - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)

   - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
     PolarFire may be configured that way (Conor Dooley)

  Miscellaneous:

   - Drop 'pci' suffix from intel_mid_pci.c filename to match similar
     files (Andy Shevchenko)

   - All platforms with PCI have an MMU, so add PCI Kconfig dependency
     on MMU to simplify build testing and avoid inadvertent build
     regressions (Arnd Bergmann)

   - Update Krzysztof Wilczyński's email address in MAINTAINERS
     (Krzysztof Wilczyński)

   - Update Manivannan Sadhasivam's email address in MAINTAINERS
     (Manivannan Sadhasivam)"

* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
  MAINTAINERS: Update Manivannan Sadhasivam email address
  PCI: j721e: Fix host/endpoint dependencies
  PCI: j721e: Add support to build as a loadable module
  PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
  PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
  PCI: cadence: Add support to build pcie-cadence library as a kernel module
  MAINTAINERS: Update Krzysztof Wilczyński email address
  PCI: Remove unnecessary linesplit in __pci_setup_bridge()
  PCI: WARN (not BUG()) when we fail to assign optional resources
  PCI: Remove unused pci_printk()
  PCI: qcom: Replace PERST# sleep time with proper macro
  PCI: dw-rockchip: Replace PERST# sleep time with proper macro
  PCI: host-common: Convert to library for host controller drivers
  PCI/ERR: Remove misleading TODO regarding kernel panic
  PCI: cadence: Remove duplicate message code definitions
  PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
  PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
  PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
  PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
  PCI: cadence-ep: Correct PBA offset in .set_msix() callback
  ...
Merge tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2025-05-27T23:48:47+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-05-27T23:48:47+00:00 c89756bcf406af313d191cfe3709e7c175c5b0cd Pull power management updates from Rafael Wysocki: "Once again, the changes are dominated by cpufreq updates, but this time the majority of them are cpufreq core changes, mostly related to the introduction of policy locking guards and __free() usage, and fixes related to boost handling. Still, there is also a significant update of the intel_pstate driver making it register an energy model when running on a hybrid platform which is used for enabling energy-aware scheduling (EAS) if the driver operates in the passive mode (and schedutil is used as the cpufreq governor for all CPUs which is the passive mode default). There are some amd-pstate driver updates too, for a good measure, including the "Requested CPU Min frequency" BIOS option support and new online/offline callbacks. In the cpuidle space, the most significant change is the addition of a C1 demotion on/off sysfs knob to intel_idle which should help some users to configure their systems more precisely. There is also the conversion of the PSCI cpuidle driver to a faux device one and there are two small updates of cpuidle governors. Device power management is also modified quite a bit, especially the handling of devices with asynchronous suspend and resume enabled during system transitions. They are now going to be handled more asynchronously during suspend transitions and somewhat less aggressively during resume transitions. Apart from the above, the operating performance points (OPP) library is now going to use mutex locking guards and scope-based cleanup helpers and there is the usual bunch of assorted fixes and code cleanups. Specifics: - Fix potential division-by-zero error in em_compute_costs() (Yaxiong Tian) - Fix typos in energy model documentation and example driver code (Moon Hee Lee, Atul Kumar Pant) - Rearrange the energy model management code and add a new function for adjusting a CPU energy model after adjusting the capacity of the given CPU to it (Rafael Wysocki) - Refactor cpufreq_online(), add and use cpufreq policy locking guards, use __free() in policy reference counting, and clean up core cpufreq code on top of that (Rafael Wysocki) - Fix boost handling on CPU suspend/resume and sysfs updates (Viresh Kumar) - Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay Ugwekar) - Add offline, online and suspend callbacks to the amd-pstate driver, rename and use the existing amd_pstate_epp callbacks in it (Dhananjay Ugwekar) - Add support for the "Requested CPU Min frequency" BIOS option to the amd-pstate driver (Dhananjay Ugwekar) - Reset amd-pstate driver mode after running selftests (Swapnil Sapkal) - Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan Chancellor) - Add helper for governor checks to the schedutil cpufreq governor and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki) - Populate the cpu_capacity sysfs entries from the intel_pstate driver after registering asym capacity support (Ricardo Neri) - Add support for enabling Energy-aware scheduling (EAS) to the intel_pstate driver when operating in the passive mode on a hybrid platform (Rafael Wysocki) - Drop redundant cpus_read_lock() from store_local_boost() in the cpufreq core (Seyediman Seyedarab) - Replace sscanf() with kstrtouint() in the cpufreq code and use a symbol instead of a raw number in it (Bowen Yu) - Add support for autonomous CPU performance state selection to the CPPC cpufreq driver (Lifeng Zheng) - OPP: Add dev_pm_opp_set_level() (Praveen Talari) - Introduce scope-based cleanup headers and mutex locking guards in OPP core (Viresh Kumar) - Switch OPP to use kmemdup_array() (Zhang Enpei) - Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the menu cpuidle governor (Zhongqiu Han) - Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla) - Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem Bityutskiy) - Fix typos in two comments in the teo cpuidle governor (Atul Kumar Pant) - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja Kalla) - Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki) - Add new devm_ functions for enabling runtime PM and runtime PM reference counting (Bence Csókás) - Remove size arguments from strscpy() calls in the hibernation core code (Thorsten Blum) - Adjust the handling of devices with asynchronous suspend enabled during system suspend and resume to start resuming them immediately after resuming their parents and to start suspending such a device immediately after suspending its first child (Rafael Wysocki) - Adjust messages printed during tasks freezing to avoid using pr_cont() (Andrew Sayers, Paul Menzel) - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan Zhang) - Add missing wakeup source attribute relax_count to sysfs and remove the space character at the end ofi the string produced by pm_show_wakelocks() (Zijun Hu) - Add configurable pm_test delay for hibernation (Zihuan Zhang) - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the cypd4226 device on Tegra boards from suspending prematurely (Jon Hunter) - Unbreak printing PM debug messages during hibernation and clean up some related code (Rafael Wysocki) - Add a systemd service to run cpupower and change cpupower binding's Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)" * tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits) cpufreq: CPPC: Add support for autonomous selection cpufreq: Update sscanf() to kstrtouint() cpufreq: Replace magic number OPP: switch to use kmemdup_array() PM: freezer: Rewrite restarting tasks log to remove stray *done.* PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn() cpufreq: drop redundant cpus_read_lock() from store_local_boost() cpupower: do not install files to /etc/default/ cpupower: do not call systemctl at install time cpupower: do not write DESTDIR to cpupower.service PM: sleep: Introduce pm_sleep_transition_in_progress() cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver() cpufreq: intel_pstate: Document hybrid processor support cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache cpufreq: intel_pstate: EAS support for hybrid platforms PM: EM: Introduce em_adjust_cpu_capacity() PM: EM: Move CPU capacity check to em_adjust_new_capacity() PM: EM: Documentation: Fix typos in example driver code cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas() PM: sleep: Introduce pm_suspend_in_progress() ... 
Pull power management updates from Rafael Wysocki:
 "Once again, the changes are dominated by cpufreq updates, but this
  time the majority of them are cpufreq core changes, mostly related to
  the introduction of policy locking guards and __free() usage, and
  fixes related to boost handling.

  Still, there is also a significant update of the intel_pstate driver
  making it register an energy model when running on a hybrid platform
  which is used for enabling energy-aware scheduling (EAS) if the driver
  operates in the passive mode (and schedutil is used as the cpufreq
  governor for all CPUs which is the passive mode default).

  There are some amd-pstate driver updates too, for a good measure,
  including the "Requested CPU Min frequency" BIOS option support and
  new online/offline callbacks.

  In the cpuidle space, the most significant change is the addition of a
  C1 demotion on/off sysfs knob to intel_idle which should help some
  users to configure their systems more precisely. There is also the
  conversion of the PSCI cpuidle driver to a faux device one and there
  are two small updates of cpuidle governors.

  Device power management is also modified quite a bit, especially the
  handling of devices with asynchronous suspend and resume enabled
  during system transitions. They are now going to be handled more
  asynchronously during suspend transitions and somewhat less
  aggressively during resume transitions.

  Apart from the above, the operating performance points (OPP) library
  is now going to use mutex locking guards and scope-based cleanup
  helpers and there is the usual bunch of assorted fixes and code
  cleanups.

  Specifics:

   - Fix potential division-by-zero error in em_compute_costs() (Yaxiong
     Tian)

   - Fix typos in energy model documentation and example driver code
     (Moon Hee Lee, Atul Kumar Pant)

   - Rearrange the energy model management code and add a new function
     for adjusting a CPU energy model after adjusting the capacity of
     the given CPU to it (Rafael Wysocki)

   - Refactor cpufreq_online(), add and use cpufreq policy locking
     guards, use __free() in policy reference counting, and clean up
     core cpufreq code on top of that (Rafael Wysocki)

   - Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
     Kumar)

   - Fix des_perf clamping with max_perf in amd_pstate_update()
     (Dhananjay Ugwekar)

   - Add offline, online and suspend callbacks to the amd-pstate driver,
     rename and use the existing amd_pstate_epp callbacks in it
     (Dhananjay Ugwekar)

   - Add support for the "Requested CPU Min frequency" BIOS option to
     the amd-pstate driver (Dhananjay Ugwekar)

   - Reset amd-pstate driver mode after running selftests (Swapnil
     Sapkal)

   - Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
     Chancellor)

   - Add helper for governor checks to the schedutil cpufreq governor
     and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)

   - Populate the cpu_capacity sysfs entries from the intel_pstate
     driver after registering asym capacity support (Ricardo Neri)

   - Add support for enabling Energy-aware scheduling (EAS) to the
     intel_pstate driver when operating in the passive mode on a hybrid
     platform (Rafael Wysocki)

   - Drop redundant cpus_read_lock() from store_local_boost() in the
     cpufreq core (Seyediman Seyedarab)

   - Replace sscanf() with kstrtouint() in the cpufreq code and use a
     symbol instead of a raw number in it (Bowen Yu)

   - Add support for autonomous CPU performance state selection to the
     CPPC cpufreq driver (Lifeng Zheng)

   - OPP: Add dev_pm_opp_set_level() (Praveen Talari)

   - Introduce scope-based cleanup headers and mutex locking guards in
     OPP core (Viresh Kumar)

   - Switch OPP to use kmemdup_array() (Zhang Enpei)

   - Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
     the menu cpuidle governor (Zhongqiu Han)

   - Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)

   - Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
     Bityutskiy)

   - Fix typos in two comments in the teo cpuidle governor (Atul Kumar
     Pant)

   - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
     Kalla)

   - Move debug runtime PM attributes to runtime_attrs[] (Rafael
     Wysocki)

   - Add new devm_ functions for enabling runtime PM and runtime PM
     reference counting (Bence Csókás)

   - Remove size arguments from strscpy() calls in the hibernation core
     code (Thorsten Blum)

   - Adjust the handling of devices with asynchronous suspend enabled
     during system suspend and resume to start resuming them immediately
     after resuming their parents and to start suspending such a device
     immediately after suspending its first child (Rafael Wysocki)

   - Adjust messages printed during tasks freezing to avoid using
     pr_cont() (Andrew Sayers, Paul Menzel)

   - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
     Zhang)

   - Add missing wakeup source attribute relax_count to sysfs and remove
     the space character at the end ofi the string produced by
     pm_show_wakelocks() (Zijun Hu)

   - Add configurable pm_test delay for hibernation (Zihuan Zhang)

   - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
     cypd4226 device on Tegra boards from suspending prematurely (Jon
     Hunter)

   - Unbreak printing PM debug messages during hibernation and clean up
     some related code (Rafael Wysocki)

   - Add a systemd service to run cpupower and change cpupower binding's
     Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"

* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  cpufreq: CPPC: Add support for autonomous selection
  cpufreq: Update sscanf() to kstrtouint()
  cpufreq: Replace magic number
  OPP: switch to use kmemdup_array()
  PM: freezer: Rewrite restarting tasks log to remove stray *done.*
  PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
  cpufreq: drop redundant cpus_read_lock() from store_local_boost()
  cpupower: do not install files to /etc/default/
  cpupower: do not call systemctl at install time
  cpupower: do not write DESTDIR to cpupower.service
  PM: sleep: Introduce pm_sleep_transition_in_progress()
  cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
  cpufreq: intel_pstate: Document hybrid processor support
  cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
  cpufreq: intel_pstate: EAS support for hybrid platforms
  PM: EM: Introduce em_adjust_cpu_capacity()
  PM: EM: Move CPU capacity check to em_adjust_new_capacity()
  PM: EM: Documentation: Fix typos in example driver code
  cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
  PM: sleep: Introduce pm_suspend_in_progress()
  ...
PM: sleep: Introduce pm_suspend_in_progress() 2025-05-13T12:00:20+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2025-05-09T13:02:27+00:00 34a364ff04e960a4d47f558acf7fbafcc3085c1f Introduce pm_suspend_in_progress() to be used for checking if a system- wide suspend or resume transition is in progress, instead of comparing pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where applicable. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/2020901.PYKUYFuaPT@rjwysocki.net 
Introduce pm_suspend_in_progress() to be used for checking if a system-
wide suspend or resume transition is in progress, instead of comparing
pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where
applicable.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2020901.PYKUYFuaPT@rjwysocki.net
Merge branch 'x86/msr' into x86/core, to resolve conflicts 2025-05-13T08:42:06+00:00 Ingo Molnar mingo@kernel.org 2025-05-13T08:42:06+00:00 1f82e8e1ca18aa0b020538a3f227f5d56382638e Conflicts: arch/x86/boot/startup/sme.c arch/x86/coco/sev/core.c arch/x86/kernel/fpu/core.c arch/x86/kernel/fpu/xstate.c Semantic conflict: arch/x86/include/asm/sev-internal.h Signed-off-by: Ingo Molnar <mingo@kernel.org> 
 Conflicts:
	arch/x86/boot/startup/sme.c
	arch/x86/coco/sev/core.c
	arch/x86/kernel/fpu/core.c
	arch/x86/kernel/fpu/xstate.c

 Semantic conflict:
	arch/x86/include/asm/sev-internal.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86/msr: Add explicit includes of <asm/msr.h> 2025-05-02T08:23:47+00:00 Xin Li (Intel) xin@zytor.com 2025-05-01T05:42:41+00:00 efef7f184f2eaf29a1ca676712d0e6e851cd0191 For historic reasons there are some TSC-related functions in the <asm/msr.h> header, even though there's an <asm/tsc.h> header. To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h> to <asm/tsc.h> and to eventually eliminate the inclusion of <asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency to the source files that reference definitions from <asm/msr.h>. [ mingo: Clarified the changelog. ] Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Uros Bizjak <ubizjak@gmail.com> Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com 
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.

To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.

[ mingo: Clarified the changelog. ]

Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com