linux.git/arch/x86/kernel/setup.c, branch v6.8 Linux kernel source tree Merge tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2024-01-18T21:41:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-01-18T21:41:48+00:00 b4442cadca2f97239c8b80f64af7937897b867b1 Pull x86 TDX updates from Dave Hansen: "This contains the initial support for host-side TDX support so that KVM can run TDX-protected guests. This does not include the actual KVM-side support which will come from the KVM folks. The TDX host interactions with kexec also needs to be ironed out before this is ready for prime time, so this code is currently Kconfig'd off when kexec is on. The majority of the code here is the kernel telling the TDX module which memory to protect and handing some additional memory over to it to use to store TDX module metadata. That sounds pretty simple, but the TDX architecture is rather flexible and it takes quite a bit of back-and-forth to say, "just protect all memory, please." There is also some code tacked on near the end of the series to handle a hardware erratum. The erratum can make software bugs such as a kernel write to TDX-protected memory cause a machine check and masquerade as a real hardware failure. The erratum handling watches out for these and tries to provide nicer user errors" * tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/virt/tdx: Make TDX host depend on X86_MCE x86/virt/tdx: Disable TDX host support when kexec is enabled Documentation/x86: Add documentation for TDX host support x86/mce: Differentiate real hardware #MCs from TDX erratum ones x86/cpu: Detect TDX partial write machine check erratum x86/virt/tdx: Handle TDX interaction with sleep and hibernation x86/virt/tdx: Initialize all TDMRs x86/virt/tdx: Configure global KeyID on all packages x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID x86/virt/tdx: Designate reserved areas for all TDMRs x86/virt/tdx: Allocate and set up PAMTs for TDMRs x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions x86/virt/tdx: Get module global metadata for module initialization x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory x86/virt/tdx: Add skeleton to enable TDX on demand x86/virt/tdx: Add SEAMCALL error printing for module initialization x86/virt/tdx: Handle SEAMCALL no entropy error in common code x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC x86/virt/tdx: Define TDX supported page sizes as macros ... 
Pull x86 TDX updates from Dave Hansen:
 "This contains the initial support for host-side TDX support so that
  KVM can run TDX-protected guests. This does not include the actual
  KVM-side support which will come from the KVM folks. The TDX host
  interactions with kexec also needs to be ironed out before this is
  ready for prime time, so this code is currently Kconfig'd off when
  kexec is on.

  The majority of the code here is the kernel telling the TDX module
  which memory to protect and handing some additional memory over to it
  to use to store TDX module metadata. That sounds pretty simple, but
  the TDX architecture is rather flexible and it takes quite a bit of
  back-and-forth to say, "just protect all memory, please."

  There is also some code tacked on near the end of the series to handle
  a hardware erratum. The erratum can make software bugs such as a
  kernel write to TDX-protected memory cause a machine check and
  masquerade as a real hardware failure. The erratum handling watches
  out for these and tries to provide nicer user errors"

* tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/virt/tdx: Make TDX host depend on X86_MCE
  x86/virt/tdx: Disable TDX host support when kexec is enabled
  Documentation/x86: Add documentation for TDX host support
  x86/mce: Differentiate real hardware #MCs from TDX erratum ones
  x86/cpu: Detect TDX partial write machine check erratum
  x86/virt/tdx: Handle TDX interaction with sleep and hibernation
  x86/virt/tdx: Initialize all TDMRs
  x86/virt/tdx: Configure global KeyID on all packages
  x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID
  x86/virt/tdx: Designate reserved areas for all TDMRs
  x86/virt/tdx: Allocate and set up PAMTs for TDMRs
  x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions
  x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions
  x86/virt/tdx: Get module global metadata for module initialization
  x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory
  x86/virt/tdx: Add skeleton to enable TDX on demand
  x86/virt/tdx: Add SEAMCALL error printing for module initialization
  x86/virt/tdx: Handle SEAMCALL no entropy error in common code
  x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC
  x86/virt/tdx: Define TDX supported page sizes as macros
  ...
x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory 2023-12-08T17:12:16+00:00 Kai Huang kai.huang@intel.com 2023-12-08T17:07:27+00:00 abe8dbab8f9f8370c26e7b79b49ed795c1b6b70f Start to transit out the "multi-steps" to initialize the TDX module. TDX provides increased levels of memory confidentiality and integrity. This requires special hardware support for features like memory encryption and storage of memory integrity checksums. Not all memory satisfies these requirements. As a result, TDX introduced the concept of a "Convertible Memory Region" (CMR). During boot, the firmware builds a list of all of the memory ranges which can provide the TDX security guarantees. The list of these ranges is available to the kernel by querying the TDX module. CMRs tell the kernel which memory is TDX compatible. The kernel needs to build a list of memory regions (out of CMRs) as "TDX-usable" memory and pass them to the TDX module. Once this is done, those "TDX-usable" memory regions are fixed during module's lifetime. To keep things simple, assume that all TDX-protected memory will come from the page allocator. Make sure all pages in the page allocator *are* TDX-usable memory. As TDX-usable memory is a fixed configuration, take a snapshot of the memory configuration from memblocks at the time of module initialization (memblocks are modified on memory hotplug). This snapshot is used to enable TDX support for *this* memory configuration only. Use a memory hotplug notifier to ensure that no other RAM can be added outside of this configuration. This approach requires all memblock memory regions at the time of module initialization to be TDX convertible memory to work, otherwise module initialization will fail in a later SEAMCALL when passing those regions to the module. This approach works when all boot-time "system RAM" is TDX convertible memory and no non-TDX-convertible memory is hot-added to the core-mm before module initialization. For instance, on the first generation of TDX machines, both CXL memory and NVDIMM are not TDX convertible memory. Using kmem driver to hot-add any CXL memory or NVDIMM to the core-mm before module initialization will result in failure to initialize the module. The SEAMCALL error code will be available in the dmesg to help user to understand the failure. Signed-off-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/all/20231208170740.53979-7-dave.hansen%40intel.com 
Start to transit out the "multi-steps" to initialize the TDX module.

TDX provides increased levels of memory confidentiality and integrity.
This requires special hardware support for features like memory
encryption and storage of memory integrity checksums.  Not all memory
satisfies these requirements.

As a result, TDX introduced the concept of a "Convertible Memory Region"
(CMR).  During boot, the firmware builds a list of all of the memory
ranges which can provide the TDX security guarantees.  The list of these
ranges is available to the kernel by querying the TDX module.

CMRs tell the kernel which memory is TDX compatible.  The kernel needs
to build a list of memory regions (out of CMRs) as "TDX-usable" memory
and pass them to the TDX module.  Once this is done, those "TDX-usable"
memory regions are fixed during module's lifetime.

To keep things simple, assume that all TDX-protected memory will come
from the page allocator.  Make sure all pages in the page allocator
*are* TDX-usable memory.

As TDX-usable memory is a fixed configuration, take a snapshot of the
memory configuration from memblocks at the time of module initialization
(memblocks are modified on memory hotplug).  This snapshot is used to
enable TDX support for *this* memory configuration only.  Use a memory
hotplug notifier to ensure that no other RAM can be added outside of
this configuration.

This approach requires all memblock memory regions at the time of module
initialization to be TDX convertible memory to work, otherwise module
initialization will fail in a later SEAMCALL when passing those regions
to the module.  This approach works when all boot-time "system RAM" is
TDX convertible memory and no non-TDX-convertible memory is hot-added
to the core-mm before module initialization.

For instance, on the first generation of TDX machines, both CXL memory
and NVDIMM are not TDX convertible memory.  Using kmem driver to hot-add
any CXL memory or NVDIMM to the core-mm before module initialization
will result in failure to initialize the module.  The SEAMCALL error
code will be available in the dmesg to help user to understand the
failure.

Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/20231208170740.53979-7-dave.hansen%40intel.com
x86/setup: Make relocated_ramdisk a local variable of relocate_initrd() 2023-11-13T08:09:37+00:00 Yuntao Wang ytcoode@gmail.com 2023-11-13T03:40:26+00:00 f7a25cf1d4707da39b80df96a3be8a8abd07c35b After 0b62f6cb0773 ("x86/microcode/32: Move early loading after paging enable"), the global variable relocated_ramdisk is no longer used anywhere except for the relocate_initrd() function. Make it a local variable of that function. Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/20231113034026.130679-1-ytcoode@gmail.com 
After

  0b62f6cb0773 ("x86/microcode/32: Move early loading after paging enable"),

the global variable relocated_ramdisk is no longer used anywhere except
for the relocate_initrd() function. Make it a local variable of that
function.

Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20231113034026.130679-1-ytcoode@gmail.com
Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2023-11-04T01:44:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-11-04T01:44:25+00:00 1f24458a1071f006e3f7449c08ae0f12af493923 Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ... 
Pull tty and serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.7-rc1. Included
  in here are:

   - console/vgacon cleanups and removals from Arnd

   - tty core and n_tty cleanups from Jiri

   - lots of 8250 driver updates and cleanups

   - sc16is7xx serial driver updates

   - dt binding updates

   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases

   - other small serial and tty core cleanups and updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
  serdev: Replace custom code with device_match_acpi_handle()
  serdev: Simplify devm_serdev_device_open() function
  serdev: Make use of device_set_node()
  tty: n_gsm: add copyright Siemens Mobility GmbH
  tty: n_gsm: fix race condition in status line change on dead connections
  serial: core: Fix runtime PM handling for pending tx
  vgacon: fix mips/sibyte build regression
  dt-bindings: serial: drop unsupported samsung bindings
  tty: serial: samsung: drop earlycon support for unsupported platforms
  tty: 8250: Add note for PX-835
  tty: 8250: Fix IS-200 PCI ID comment
  tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  tty: 8250: Add support for Intashield IX cards
  tty: 8250: Add support for additional Brainboxes PX cards
  tty: 8250: Fix up PX-803/PX-857
  tty: 8250: Fix port count of PX-257
  tty: 8250: Add support for Intashield IS-100
  tty: 8250: Add support for Brainboxes UP cards
  tty: 8250: Add support for additional Brainboxes UC cards
  tty: 8250: Remove UC-257 and UC-431
  ...
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2023-11-03T06:53:31+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-11-03T06:53:31+00:00 8f6f76a6a29f36d2f3e4510d0bde5046672f6924 Pull non-MM updates from Andrew Morton: "As usual, lots of singleton and doubleton patches all over the tree and there's little I can say which isn't in the individual changelogs. The lengthier patch series are - 'kdump: use generic functions to simplify crashkernel reservation in arch', from Baoquan He. This is mainly cleanups and consolidation of the 'crashkernel=' kernel parameter handling - After much discussion, David Laight's 'minmax: Relax type checks in min() and max()' is here. Hopefully reduces some typecasting and the use of min_t() and max_t() - A group of patches from Oleg Nesterov which clean up and slightly fix our handling of reads from /proc/PID/task/... and which remove task_struct.thread_group" * tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits) scripts/gdb/vmalloc: disable on no-MMU scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n .mailmap: add address mapping for Tomeu Vizoso mailmap: update email address for Claudiu Beznea tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions .mailmap: map Benjamin Poirier's address scripts/gdb: add lx_current support for riscv ocfs2: fix a spelling typo in comment proc: test ProtectionKey in proc-empty-vm test proc: fix proc-empty-vm test with vsyscall fs/proc/base.c: remove unneeded semicolon do_io_accounting: use sig->stats_lock do_io_accounting: use __for_each_thread() ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error() ocfs2: fix a typo in a comment scripts/show_delta: add __main__ judgement before main code treewide: mark stuff as __ro_after_init fs: ocfs2: check status values proc: test /proc/${pid}/statm compiler.h: move __is_constexpr() to compiler.h ... 
Pull non-MM updates from Andrew Morton:
 "As usual, lots of singleton and doubleton patches all over the tree
  and there's little I can say which isn't in the individual changelogs.

  The lengthier patch series are

   - 'kdump: use generic functions to simplify crashkernel reservation
     in arch', from Baoquan He. This is mainly cleanups and
     consolidation of the 'crashkernel=' kernel parameter handling

   - After much discussion, David Laight's 'minmax: Relax type checks in
     min() and max()' is here. Hopefully reduces some typecasting and
     the use of min_t() and max_t()

   - A group of patches from Oleg Nesterov which clean up and slightly
     fix our handling of reads from /proc/PID/task/... and which remove
     task_struct.thread_group"

* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
  scripts/gdb/vmalloc: disable on no-MMU
  scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
  .mailmap: add address mapping for Tomeu Vizoso
  mailmap: update email address for Claudiu Beznea
  tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
  .mailmap: map Benjamin Poirier's address
  scripts/gdb: add lx_current support for riscv
  ocfs2: fix a spelling typo in comment
  proc: test ProtectionKey in proc-empty-vm test
  proc: fix proc-empty-vm test with vsyscall
  fs/proc/base.c: remove unneeded semicolon
  do_io_accounting: use sig->stats_lock
  do_io_accounting: use __for_each_thread()
  ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
  ocfs2: fix a typo in a comment
  scripts/show_delta: add __main__ judgement before main code
  treewide: mark stuff as __ro_after_init
  fs: ocfs2: check status values
  proc: test /proc/${pid}/statm
  compiler.h: move __is_constexpr() to compiler.h
  ...
Merge tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2023-10-31T01:40:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-10-31T01:40:57+00:00 f0d25b5d0f8ef0ad35f1beff17da5843279d47a1 Pull x86 mm handling updates from Ingo Molnar: - Add new NX-stack self-test - Improve NUMA partial-CFMWS handling - Fix #VC handler bugs resulting in SEV-SNP boot failures - Drop the 4MB memory size restriction on minimal NUMA nodes - Reorganize headers a bit, in preparation to header dependency reduction efforts - Misc cleanups & fixes * tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size selftests/x86/lam: Zero out buffer for readlink() x86/sev: Drop unneeded #include x86/sev: Move sev_setup_arch() to mem_encrypt.c x86/tdx: Replace deprecated strncpy() with strtomem_pad() selftests/x86/mm: Add new test that userspace stack is in fact NX x86/sev: Make boot_ghcb_page[] static x86/boot: Move x86_cache_alignment initialization to correct spot x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot x86_64: Show CR4.PSE on auxiliaries like on BSP x86/iommu/docs: Update AMD IOMMU specification document URL x86/sev/docs: Update document URL in amd-memory-encryption.rst x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h> ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window x86/numa: Introduce numa_fill_memblks() 
Pull x86 mm handling updates from Ingo Molnar:

 - Add new NX-stack self-test

 - Improve NUMA partial-CFMWS handling

 - Fix #VC handler bugs resulting in SEV-SNP boot failures

 - Drop the 4MB memory size restriction on minimal NUMA nodes

 - Reorganize headers a bit, in preparation to header dependency
   reduction efforts

 - Misc cleanups & fixes

* tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size
  selftests/x86/lam: Zero out buffer for readlink()
  x86/sev: Drop unneeded #include
  x86/sev: Move sev_setup_arch() to mem_encrypt.c
  x86/tdx: Replace deprecated strncpy() with strtomem_pad()
  selftests/x86/mm: Add new test that userspace stack is in fact NX
  x86/sev: Make boot_ghcb_page[] static
  x86/boot: Move x86_cache_alignment initialization to correct spot
  x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach
  x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot
  x86_64: Show CR4.PSE on auxiliaries like on BSP
  x86/iommu/docs: Update AMD IOMMU specification document URL
  x86/sev/docs: Update document URL in amd-memory-encryption.rst
  x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h>
  ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window
  x86/numa: Introduce numa_fill_memblks()
Merge tag 'x86_platform_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2023-10-30T22:32:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-10-30T22:32:48+00:00 f155f3b3ed1af23884ffaffe8a669722b87ac9d6 Pull x86 platform updates from Borislav Petkov: - Make sure PCI function 4 IDs of AMD family 0x19, models 0x60-0x7f are actually used in the amd_nb.c enumeration - Add support for extracting NUMA information from devicetree for Hyper-V usages - Add PCI device IDs for the new AMD MI300 AI accelerators - Annotate an array in struct uv_rtc_timer_head with the new __counted_by attribute - Rework UV's NMI action parameter handling * tag 'x86_platform_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd_nb: Use Family 19h Models 60h-7Fh Function 4 IDs x86/numa: Add Devicetree support x86/of: Move the x86_flattree_get_config() call out of x86_dtb_init() x86/amd_nb: Add AMD Family MI300 PCI IDs x86/platform/uv: Annotate struct uv_rtc_timer_head with __counted_by x86/platform/uv: Rework NMI "action" modparam handling 
Pull x86 platform updates from Borislav Petkov:

 - Make sure PCI function 4 IDs of AMD family 0x19, models 0x60-0x7f are
   actually used in the amd_nb.c enumeration

 - Add support for extracting NUMA information from devicetree for
   Hyper-V usages

 - Add PCI device IDs for the new AMD MI300 AI accelerators

 - Annotate an array in struct uv_rtc_timer_head with the new
   __counted_by attribute

 - Rework UV's NMI action parameter handling

* tag 'x86_platform_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/amd_nb: Use Family 19h Models 60h-7Fh Function 4 IDs
  x86/numa: Add Devicetree support
  x86/of: Move the x86_flattree_get_config() call out of x86_dtb_init()
  x86/amd_nb: Add AMD Family MI300 PCI IDs
  x86/platform/uv: Annotate struct uv_rtc_timer_head with __counted_by
  x86/platform/uv: Rework NMI "action" modparam handling
vgacon: remove screen_info dependency 2023-10-17T08:17:02+00:00 Arnd Bergmann arnd@arndb.de 2023-10-09T21:18:41+00:00 acfc788233263fee9413434d39d4201a8de592ba The vga console driver is fairly self-contained, and only used by architectures that explicitly initialize the screen_info settings. Chance every instance that picks the vga console by setting conswitchp to call a function instead, and pass a reference to the screen_info there. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Khalid Azzi <khalid@gonehiking.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-6-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The vga console driver is fairly self-contained, and only used by
architectures that explicitly initialize the screen_info settings.

Chance every instance that picks the vga console by setting conswitchp
to call a function instead, and pass a reference to the screen_info
there.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Khalid Azzi <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-6-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/sev: Move sev_setup_arch() to mem_encrypt.c 2023-10-11T08:15:47+00:00 Alexander Shishkin alexander.shishkin@linux.intel.com 2023-10-10T14:52:19+00:00 6e74b125155dc8c747d76fb45d8e6d20e9e4fb4d Since commit: 4d96f9109109b ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()") ... the SWIOTLB bounce buffer size adjustment and restricted virtio memory setting also inadvertently apply to TDX: the code is using cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) as a gatekeeping condition, which is also true for TDX, and this is also what we want. To reflect this, move the corresponding code to generic mem_encrypt.c. No functional changes intended. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20231010145220.3960055-2-alexander.shishkin@linux.intel.com 
Since commit:

  4d96f9109109b ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()")

... the SWIOTLB bounce buffer size adjustment and restricted virtio memory
setting also inadvertently apply to TDX: the code is using
cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) as a gatekeeping condition,
which is also true for TDX, and this is also what we want.

To reflect this, move the corresponding code to generic mem_encrypt.c.

No functional changes intended.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20231010145220.3960055-2-alexander.shishkin@linux.intel.com
x86: kdump: use generic interface to simplify crashkernel reservation code 2023-10-04T17:41:58+00:00 Baoquan He bhe@redhat.com 2023-09-14T03:31:39+00:00 9c08a2a139fe83f217625ee0352ce531b9a666ea With the help of newly changed function parse_crashkernel() and generic reserve_crashkernel_generic(), crashkernel reservation can be simplified by steps: 1) Add a new header file <asm/crash_core.h>, and define CRASH_ALIGN, CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX and DEFAULT_CRASH_KERNEL_LOW_SIZE in <asm/crash_core.h>; 2) Add arch_reserve_crashkernel() to call parse_crashkernel() and reserve_crashkernel_generic(), and do the ARCH specific work if needed. 3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in arch/x86/Kconfig. When adding DEFAULT_CRASH_KERNEL_LOW_SIZE, add crash_low_size_default() to calculate crashkernel low memory because x86_64 has special requirement. The old reserve_crashkernel_low() and reserve_crashkernel() can be removed. [bhe@redhat.com: move crash_low_size_default() code into <asm/crash_core.h>] Link: https://lkml.kernel.org/r/ZQpeAjOmuMJBFw1/@MiWiFi-R3L-srv Link: https://lkml.kernel.org/r/20230914033142.676708-7-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Jiahao <chenjiahao16@huawei.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
With the help of newly changed function parse_crashkernel() and generic
reserve_crashkernel_generic(), crashkernel reservation can be simplified
by steps:

1) Add a new header file <asm/crash_core.h>, and define CRASH_ALIGN,
   CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX and
   DEFAULT_CRASH_KERNEL_LOW_SIZE in <asm/crash_core.h>;

2) Add arch_reserve_crashkernel() to call parse_crashkernel() and
   reserve_crashkernel_generic(), and do the ARCH specific work if
   needed.

3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in
   arch/x86/Kconfig.

When adding DEFAULT_CRASH_KERNEL_LOW_SIZE, add crash_low_size_default() to
calculate crashkernel low memory because x86_64 has special requirement.

The old reserve_crashkernel_low() and reserve_crashkernel() can be
removed.

[bhe@redhat.com: move crash_low_size_default() code into <asm/crash_core.h>]
  Link: https://lkml.kernel.org/r/ZQpeAjOmuMJBFw1/@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20230914033142.676708-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>