linux.git/arch/x86/kernel/reboot.c, branch v6.2 Linux kernel source tree x86: Use do_kernel_power_off() 2022-05-19T17:30:31+00:00 Dmitry Osipenko dmitry.osipenko@collabora.com 2022-05-09T23:32:26+00:00 d35773499329300d837818417f6d1b5a7987317d Kernel now supports chained power-off handlers. Use do_kernel_power_off() that invokes chained power-off handlers. It also invokes legacy pm_power_off() for now, which will be removed once all drivers will be converted to the new sys-off API. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.

Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
x86/mm: Flush global TLB when switching to trampoline page-table 2021-12-06T08:54:10+00:00 Joerg Roedel jroedel@suse.de 2021-12-02T15:32:25+00:00 71d5049b053876afbde6c3273250b76935494ab2 Move the switching code into a function so that it can be re-used and add a global TLB flush. This makes sure that usage of memory which is not mapped in the trampoline page-table is reliably caught. Also move the clearing of CR4.PCIDE before the CR3 switch because the cr4_clear_bits() function will access data not mapped into the trampoline page-table. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211202153226.22946-4-joro@8bytes.org 
Move the switching code into a function so that it can be re-used and
add a global TLB flush. This makes sure that usage of memory which is
not mapped in the trampoline page-table is reliably caught.

Also move the clearing of CR4.PCIDE before the CR3 switch because the
cr4_clear_bits() function will access data not mapped into the
trampoline page-table.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211202153226.22946-4-joro@8bytes.org
x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions 2021-08-12T10:06:58+00:00 Paul Gortmaker paul.gortmaker@windriver.com 2021-05-30T16:24:47+00:00 a729691b541f6e63043beae72e635635abe5dc09 When this platform was relatively new in November 2011, with early BIOS revisions, a reboot quirk was added in commit 6be30bb7d750 ("x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot") However, this quirk (and several others) are open-ended to all BIOS versions and left no automatic expiry if/when the system BIOS fixed the issue, meaning that nobody is likely to come along and re-test. What is really problematic with using PCI reboot as this quirk does, is that it causes this platform to do a full power down, wait one second, and then power back on. This is less than ideal if one is using it for boot testing and/or bisecting kernels when legacy rotating hard disks are installed. It was only by chance that the quirk was noticed in dmesg - and when disabled it turned out that it wasn't required anymore (BIOS A24), and a default reboot would work fine without the "harshness" of power cycling the machine (and disks) down and up like the PCI reboot does. Doing a bit more research, it seems that the "newest" BIOS for which the issue was reported[1] was version A06, however Dell[2] seemed to suggest only up to and including version A05, with the A06 having a large number of fixes[3] listed. As is typical with a new platform, the initial BIOS updates come frequently and then taper off (and in this case, with a revival for CPU CVEs); a search for O990-A<ver>.exe reveals the following dates: A02 16 Mar 2011 A03 11 May 2011 A06 14 Sep 2011 A07 24 Oct 2011 A10 08 Dec 2011 A14 06 Sep 2012 A16 15 Oct 2012 A18 30 Sep 2013 A19 23 Sep 2015 A20 02 Jun 2017 A23 07 Mar 2018 A24 21 Aug 2018 While it's overkill to flash and test each of the above, it would seem likely that the issue was contained within A0x BIOS versions, given the dates above and the dates of issue reports[4] from distros. So rather than just throw out the quirk entirely, limit the scope to just those early BIOS versions, in case people are still running systems from 2011 with the original as-shipped early A0x BIOS versions. [1] https://lore.kernel.org/lkml/1320373471-3942-1-git-send-email-trenn@suse.de/ [2] https://www.dell.com/support/kbdoc/en-ca/000131908/linux-based-operating-systems-stall-upon-reboot-on-optiplex-390-790-990-systems [3] https://www.dell.com/support/home/en-ca/drivers/driversdetails?driverid=85j10 [4] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/768039 Fixes: 6be30bb7d750 ("x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot") Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210530162447.996461-4-paul.gortmaker@windriver.com 
When this platform was relatively new in November 2011, with early BIOS
revisions, a reboot quirk was added in commit 6be30bb7d750 ("x86/reboot:
Blacklist Dell OptiPlex 990 known to require PCI reboot")

However, this quirk (and several others) are open-ended to all BIOS
versions and left no automatic expiry if/when the system BIOS fixed the
issue, meaning that nobody is likely to come along and re-test.

What is really problematic with using PCI reboot as this quirk does, is
that it causes this platform to do a full power down, wait one second,
and then power back on.  This is less than ideal if one is using it for
boot testing and/or bisecting kernels when legacy rotating hard disks
are installed.

It was only by chance that the quirk was noticed in dmesg - and when
disabled it turned out that it wasn't required anymore (BIOS A24), and a
default reboot would work fine without the "harshness" of power cycling the
machine (and disks) down and up like the PCI reboot does.

Doing a bit more research, it seems that the "newest" BIOS for which the
issue was reported[1] was version A06, however Dell[2] seemed to suggest
only up to and including version A05, with the A06 having a large number of
fixes[3] listed.

As is typical with a new platform, the initial BIOS updates come frequently
and then taper off (and in this case, with a revival for CPU CVEs); a
search for O990-A<ver>.exe reveals the following dates:

        A02     16 Mar 2011
        A03     11 May 2011
        A06     14 Sep 2011
        A07     24 Oct 2011
        A10     08 Dec 2011
        A14     06 Sep 2012
        A16     15 Oct 2012
        A18     30 Sep 2013
        A19     23 Sep 2015
        A20     02 Jun 2017
        A23     07 Mar 2018
        A24     21 Aug 2018

While it's overkill to flash and test each of the above, it would seem
likely that the issue was contained within A0x BIOS versions, given the
dates above and the dates of issue reports[4] from distros.  So rather than
just throw out the quirk entirely, limit the scope to just those early BIOS
versions, in case people are still running systems from 2011 with the
original as-shipped early A0x BIOS versions.

[1] https://lore.kernel.org/lkml/1320373471-3942-1-git-send-email-trenn@suse.de/
[2] https://www.dell.com/support/kbdoc/en-ca/000131908/linux-based-operating-systems-stall-upon-reboot-on-optiplex-390-790-990-systems
[3] https://www.dell.com/support/home/en-ca/drivers/driversdetails?driverid=85j10
[4] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/768039

Fixes: 6be30bb7d750 ("x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210530162447.996461-4-paul.gortmaker@windriver.com
x86/idt: Remove address argument from idt_invalidate() 2021-05-21T10:36:45+00:00 H. Peter Anvin (Intel) hpa@zytor.com 2021-05-19T21:21:50+00:00 8ec9069a432c873e52e6f4ce1496f282a4299604 There is no reason to specify any specific address to idt_invalidate(). It looks mostly like an artifact of unifying code done differently by accident. The most "sensible" address to set here is a NULL pointer - virtual address zero, just as a visual marker. This also makes it possible to mark the struct desc_ptr in idt_invalidate() as static const. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210519212154.511983-5-hpa@zytor.com 
There is no reason to specify any specific address to idt_invalidate(). It
looks mostly like an artifact of unifying code done differently by
accident. The most "sensible" address to set here is a NULL pointer -
virtual address zero, just as a visual marker.

This also makes it possible to mark the struct desc_ptr in idt_invalidate()
as static const.

Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210519212154.511983-5-hpa@zytor.com
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm 2021-02-21T21:31:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-02-21T21:31:43+00:00 3e10585335b7967326ca7b4118cada0d2d00a2ab Pull KVM updates from Paolo Bonzini: "x86: - Support for userspace to emulate Xen hypercalls - Raise the maximum number of user memslots - Scalability improvements for the new MMU. Instead of the complex "fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent, but the code that can run against page faults is limited. Right now only page faults take the lock for reading; in the future this will be extended to some cases of page table destruction. I hope to switch the default MMU around 5.12-rc3 (some testing was delayed due to Chinese New Year). - Cleanups for MAXPHYADDR checks - Use static calls for vendor-specific callbacks - On AMD, use VMLOAD/VMSAVE to save and restore host state - Stop using deprecated jump label APIs - Workaround for AMD erratum that made nested virtualization unreliable - Support for LBR emulation in the guest - Support for communicating bus lock vmexits to userspace - Add support for SEV attestation command - Miscellaneous cleanups PPC: - Support for second data watchpoint on POWER10 - Remove some complex workarounds for buggy early versions of POWER9 - Guest entry/exit fixes ARM64: - Make the nVHE EL2 object relocatable - Cleanups for concurrent translation faults hitting the same page - Support for the standard TRNG hypervisor call - A bunch of small PMU/Debug fixes - Simplification of the early init hypercall handling Non-KVM changes (with acks): - Detection of contended rwlocks (implemented only for qrwlocks, because KVM only needs it for x86) - Allow __DISABLE_EXPORTS from assembly code - Provide a saner follow_pfn replacements for modules" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits) KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes KVM: selftests: Don't bother mapping GVA for Xen shinfo test KVM: selftests: Fix hex vs. decimal snafu in Xen test KVM: selftests: Fix size of memslots created by Xen tests KVM: selftests: Ignore recently added Xen tests' build output KVM: selftests: Add missing header file needed by xAPIC IPI tests KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static locking/arch: Move qrwlock.h include after qspinlock.h KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2 KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path KVM: PPC: remove unneeded semicolon KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest KVM: PPC: Book3S HV: Fix radix guest SLB side channel KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR ... 
Pull KVM updates from Paolo Bonzini:
 "x86:

   - Support for userspace to emulate Xen hypercalls

   - Raise the maximum number of user memslots

   - Scalability improvements for the new MMU.

     Instead of the complex "fast page fault" logic that is used in
     mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
     but the code that can run against page faults is limited. Right now
     only page faults take the lock for reading; in the future this will
     be extended to some cases of page table destruction. I hope to
     switch the default MMU around 5.12-rc3 (some testing was delayed
     due to Chinese New Year).

   - Cleanups for MAXPHYADDR checks

   - Use static calls for vendor-specific callbacks

   - On AMD, use VMLOAD/VMSAVE to save and restore host state

   - Stop using deprecated jump label APIs

   - Workaround for AMD erratum that made nested virtualization
     unreliable

   - Support for LBR emulation in the guest

   - Support for communicating bus lock vmexits to userspace

   - Add support for SEV attestation command

   - Miscellaneous cleanups

  PPC:

   - Support for second data watchpoint on POWER10

   - Remove some complex workarounds for buggy early versions of POWER9

   - Guest entry/exit fixes

  ARM64:

   - Make the nVHE EL2 object relocatable

   - Cleanups for concurrent translation faults hitting the same page

   - Support for the standard TRNG hypervisor call

   - A bunch of small PMU/Debug fixes

   - Simplification of the early init hypercall handling

  Non-KVM changes (with acks):

   - Detection of contended rwlocks (implemented only for qrwlocks,
     because KVM only needs it for x86)

   - Allow __DISABLE_EXPORTS from assembly code

   - Provide a saner follow_pfn replacements for modules"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
  KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
  KVM: selftests: Don't bother mapping GVA for Xen shinfo test
  KVM: selftests: Fix hex vs. decimal snafu in Xen test
  KVM: selftests: Fix size of memslots created by Xen tests
  KVM: selftests: Ignore recently added Xen tests' build output
  KVM: selftests: Add missing header file needed by xAPIC IPI tests
  KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
  KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
  locking/arch: Move qrwlock.h include after qspinlock.h
  KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
  KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
  KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
  KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
  KVM: PPC: remove unneeded semicolon
  KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
  KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
  KVM: PPC: Book3S HV: Fix radix guest SLB side channel
  KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
  KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
  KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
  ...
x86/reboot: Force all cpus to exit VMX root if VMX is supported 2021-02-04T10:27:31+00:00 Sean Christopherson seanjc@google.com 2020-12-31T00:26:55+00:00 ed72736183c45a413a8d6974dd04be90f514cb6b Force all CPUs to do VMXOFF (via NMI shootdown) during an emergency reboot if VMX is _supported_, as VMX being off on the current CPU does not prevent other CPUs from being in VMX root (post-VMXON). This fixes a bug where a crash/panic reboot could leave other CPUs in VMX root and prevent them from being woken via INIT-SIPI-SIPI in the new kernel. Fixes: d176720d34c7 ("x86: disable VMX on all CPUs on reboot") Cc: stable@vger.kernel.org Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David P. Reed <dpreed@deepplum.com> [sean: reworked changelog and further tweaked comment] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20201231002702.2223707-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 
Force all CPUs to do VMXOFF (via NMI shootdown) during an emergency
reboot if VMX is _supported_, as VMX being off on the current CPU does
not prevent other CPUs from being in VMX root (post-VMXON).  This fixes
a bug where a crash/panic reboot could leave other CPUs in VMX root and
prevent them from being woken via INIT-SIPI-SIPI in the new kernel.

Fixes: d176720d34c7 ("x86: disable VMX on all CPUs on reboot")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David P. Reed <dpreed@deepplum.com>
[sean: reworked changelog and further tweaked comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201231002702.2223707-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk 2020-12-30T17:38:39+00:00 Heiner Kallweit hkallweit1@gmail.com 2020-12-01T11:39:57+00:00 4b2d8ca9208be636b30e924b1cbcb267b0740c93 On this system the M.2 PCIe WiFi card isn't detected after reboot, only after cold boot. reboot=pci fixes this behavior. In [0] the same issue is described, although on another system and with another Intel WiFi card. In case it's relevant, both systems have Celeron CPUs. Add a PCI reboot quirk on affected systems until a more generic fix is available. [0] https://bugzilla.kernel.org/show_bug.cgi?id=202399 [ bp: Massage commit message. ] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/1524eafd-f89c-cfa4-ed70-0bde9e45eec9@gmail.com 
On this system the M.2 PCIe WiFi card isn't detected after reboot, only
after cold boot. reboot=pci fixes this behavior. In [0] the same issue
is described, although on another system and with another Intel WiFi
card. In case it's relevant, both systems have Celeron CPUs.

Add a PCI reboot quirk on affected systems until a more generic fix is
available.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202399

 [ bp: Massage commit message. ]

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1524eafd-f89c-cfa4-ed70-0bde9e45eec9@gmail.com
objtool: Rename frame.h -> objtool.h 2020-09-10T15:43:13+00:00 Julien Thierry jthierry@redhat.com 2020-09-04T15:30:25+00:00 00089c048eb4a8250325efb32a2724fd0da68cce Header frame.h is getting more code annotations to help objtool analyze object files. Rename the file to objtool.h. [ jpoimboe: add objtool.h to MAINTAINERS ] Signed-off-by: Julien Thierry <jthierry@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> 
Header frame.h is getting more code annotations to help objtool analyze
object files.

Rename the file to objtool.h.

[ jpoimboe: add objtool.h to MAINTAINERS ]

Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
treewide: Use fallthrough pseudo-keyword 2020-08-23T22:36:59+00:00 Gustavo A. R. Silva gustavoars@kernel.org 2020-08-23T22:36:59+00:00 df561f6688fef775baa341a0f5d960becd248b11 Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> 
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Merge tag 'x86-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2020-06-11T22:54:31+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-06-11T22:54:31+00:00 6a45a65888393eda692fce0851c40d9f5ce4ef66 Pull more x86 updates from Thomas Gleixner: "A set of fixes and updates for x86: - Unbreak paravirt VDSO clocks. While the VDSO code was moved into lib for sharing a subtle check for the validity of paravirt clocks got replaced. While the replacement works perfectly fine for bare metal as the update of the VDSO clock mode is synchronous, it fails for paravirt clocks because the hypervisor can invalidate them asynchronously. Bring it back as an optional function so it does not inflict this on architectures which are free of PV damage. - Fix the jiffies to jiffies64 mapping on 64bit so it does not trigger an ODR violation on newer compilers - Three fixes for the SSBD and *IB* speculation mitigation maze to ensure consistency, not disabling of some *IB* variants wrongly and to prevent a rogue cross process shutdown of SSBD. All marked for stable. - Add yet more CPU models to the splitlock detection capable list !@#%$! - Bring the pr_info() back which tells that TSC deadline timer is enabled. - Reboot quirk for MacBook6,1" * tag 'x86-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Unbreak paravirt VDSO clocks lib/vdso: Provide sanity check for cycles (again) clocksource: Remove obsolete ifdef x86_64: Fix jiffies ODR violation x86/speculation: PR_SPEC_FORCE_DISABLE enforcement for indirect branches. x86/speculation: Prevent rogue cross-process SSBD shutdown x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS. x86/cpu: Add Sapphire Rapids CPU model number x86/split_lock: Add Icelake microserver and Tigerlake CPU models x86/apic: Make TSC deadline timer detection message visible x86/reboot/quirks: Add MacBook6,1 reboot quirk 
Pull more x86 updates from Thomas Gleixner:
 "A set of fixes and updates for x86:

   - Unbreak paravirt VDSO clocks.

     While the VDSO code was moved into lib for sharing a subtle check
     for the validity of paravirt clocks got replaced. While the
     replacement works perfectly fine for bare metal as the update of
     the VDSO clock mode is synchronous, it fails for paravirt clocks
     because the hypervisor can invalidate them asynchronously.

     Bring it back as an optional function so it does not inflict this
     on architectures which are free of PV damage.

   - Fix the jiffies to jiffies64 mapping on 64bit so it does not
     trigger an ODR violation on newer compilers

   - Three fixes for the SSBD and *IB* speculation mitigation maze to
     ensure consistency, not disabling of some *IB* variants wrongly and
     to prevent a rogue cross process shutdown of SSBD. All marked for
     stable.

   - Add yet more CPU models to the splitlock detection capable list
     !@#%$!

   - Bring the pr_info() back which tells that TSC deadline timer is
     enabled.

   - Reboot quirk for MacBook6,1"

* tag 'x86-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Unbreak paravirt VDSO clocks
  lib/vdso: Provide sanity check for cycles (again)
  clocksource: Remove obsolete ifdef
  x86_64: Fix jiffies ODR violation
  x86/speculation: PR_SPEC_FORCE_DISABLE enforcement for indirect branches.
  x86/speculation: Prevent rogue cross-process SSBD shutdown
  x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.
  x86/cpu: Add Sapphire Rapids CPU model number
  x86/split_lock: Add Icelake microserver and Tigerlake CPU models
  x86/apic: Make TSC deadline timer detection message visible
  x86/reboot/quirks: Add MacBook6,1 reboot quirk