linux.git/arch/x86/kernel/process_64.c, branch v4.13

x86/mm: Split read_cr3() into read_cr3_pa() and __read_cr3()

2017-06-13T06:48:09+00:00

The kernel has several code paths that read CR3.  Most of them assume that
CR3 contains the PGD's physical address, whereas some of them awkwardly
use PHYSICAL_PAGE_MASK to mask off low bits.

Add explicit mask macros for CR3 and convert all of the CR3 readers.
This will keep them from breaking when PCID is enabled.

Signed-off-by: Andy Lutomirski 
Cc: Boris Ostrovsky 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Juergen Gross 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Tom Lendacky 
Cc: xen-devel 
Link: http://lkml.kernel.org/r/883f8fb121f4616c1c1427ad87350bb2f5ffeca1.1497288170.git.luto@kernel.org
Signed-off-by: Ingo Molnar

x86/ldt: Rename ldt_struct::size to ::nr_entries

2017-06-08T07:28:21+00:00

... because this is exactly what it is: the number of entries in the
LDT. Calling it "size" is simply confusing and it is actually begging
to be called "nr_entries" or somesuch, especially if you see constructs
like:

	alloc_size = size * LDT_ENTRY_SIZE;

since LDT_ENTRY_SIZE is the size of a single entry.

There should be no functionality change resulting from this patch, as
the before/after output from tools/testing/selftests/x86/ldt_gdt.c
shows.

Signed-off-by: Borislav Petkov 
Acked-by: Andy Lutomirski 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20170606173116.13977-1-bp@alien8.de
[ Renamed 'n_entries' to 'nr_entries' ]
Signed-off-by: Ingo Molnar

x86/xen: add CONFIG_XEN_PV to Kconfig

2017-05-02T08:50:19+00:00

All code to support Xen PV will get under this new option. For the
beginning, check for it in the common code.

Signed-off-by: Vitaly Kuznetsov 
Reviewed-by: Juergen Gross 
Signed-off-by: Juergen Gross

x86/mm: Make in_compat_syscall() work during exec

2017-03-31T14:53:02+00:00

The x86 mmap() code selects the mmap base for an allocation depending on
the bitness of the syscall. For 64bit sycalls it select mm->mmap_base and
for 32bit mm->mmap_compat_base.

On execve the registers of the task invoking exec() are copied to the child
pt_regs. So child->pt_regs->orig_ax contains the execve syscall number of the
parent.

exec() calls mmap() which in turn uses in_compat_syscall() to check whether
the mapping is for a 32bit or a 64bit task. The decision is made on the
following criteria:

  ia32	  child->thread.status & TS_COMPAT
   x32	  child->pt_regs.orig_ax & __X32_SYSCALL_BIT
  ia64	  !ia32 && !x32 

child->thread.status is corretly set up in set_personality_*(), but the
syscall number in child->pt_regs.orig_ax is left unmodified.

Therefore the parent/child combinations work or fail in the following way:

Parent Child Child->thread_status  child->pt_regs.orig_ax  in_compat()  Works
ia64    ia64   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 0     false       Y
ia64    ia32   TS_COMPAT == 1	   __X32_SYSCALL_BIT == 0     true        Y
ia64     x32   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 0     false       N
ia32    ia64   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 0     false       Y
ia32    ia32   TS_COMPAT == 1	   __X32_SYSCALL_BIT == 0     true        Y
ia32     x32   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 0     false       N
 x32    ia64   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 1     true        N
 x32    ia32   TS_COMPAT == 1	   __X32_SYSCALL_BIT == 1     true        Y
 x32     x32   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 1     true        Y

Make set_personality_*() store the syscall number incl. __X32_SYSCALL_BIT
which corresponds to the newly started ELF executable in the childs
pt_regs, i.e. pretend that the exec was invoked from a task with the same
executable format.

So both thread.status and pt_regs.orig_ax correspond to the new ELF format
and in_compat_syscall() returns the correct result.

[ tglx: Rewrote changelog ]

Fixes: commit 1b028f784e8c ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Reported-by: Adam Borowski 
Suggested-by: H. Peter Anvin 
Suggested-by: Thomas Gleixner 
Signed-off-by: Dmitry Safonov 
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andrei Vagin 
Cc: Andy Lutomirski 
Cc: Cyrill Gorcunov 
Cc: Borislav Petkov 
Cc: "Kirill A. Shutemov" 
Link: http://lkml.kernel.org/r/20170331111137.28170-1-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner

x86/syscalls/32: Wire up arch_prctl on x86-32

2017-03-20T15:10:33+00:00

Hook up arch_prctl to call do_arch_prctl() on x86-32, and in 32 bit compat
mode on x86-64. This allows to have arch_prctls that are not specific to 64
bits.

On UML, simply stub out this syscall.

Signed-off-by: Kyle Huey 
Cc: Grzegorz Andrejczuk 
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář 
Cc: Peter Zijlstra 
Cc: Dave Hansen 
Cc: Andi Kleen 
Cc: linux-kselftest@vger.kernel.org
Cc: Nadav Amit 
Cc: Robert O'Callahan 
Cc: Richard Weinberger 
Cc: "Rafael J. Wysocki" 
Cc: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Len Brown 
Cc: Shuah Khan 
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Jeff Dike 
Cc: Alexander Viro 
Cc: user-mode-linux-user@lists.sourceforge.net
Cc: David Matlack 
Cc: Boris Ostrovsky 
Cc: Dmitry Safonov 
Cc: linux-fsdevel@vger.kernel.org
Cc: Paolo Bonzini 
Link: http://lkml.kernel.org/r/20170320081628.18952-7-khuey@kylehuey.com
Signed-off-by: Thomas Gleixner

x86/arch_prctl: Add do_arch_prctl_common()

2017-03-20T15:10:33+00:00

Add do_arch_prctl_common() to handle arch_prctls that are not specific to 64
bit mode. Call it from the syscall entry point, but not any of the other
callsites in the kernel, which all want one of the existing 64 bit only
arch_prctls.

Signed-off-by: Kyle Huey 
Cc: Grzegorz Andrejczuk 
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář 
Cc: Peter Zijlstra 
Cc: Dave Hansen 
Cc: Andi Kleen 
Cc: linux-kselftest@vger.kernel.org
Cc: Nadav Amit 
Cc: Robert O'Callahan 
Cc: Richard Weinberger 
Cc: "Rafael J. Wysocki" 
Cc: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Len Brown 
Cc: Shuah Khan 
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Jeff Dike 
Cc: Alexander Viro 
Cc: user-mode-linux-user@lists.sourceforge.net
Cc: David Matlack 
Cc: Boris Ostrovsky 
Cc: Dmitry Safonov 
Cc: linux-fsdevel@vger.kernel.org
Cc: Paolo Bonzini 
Link: http://lkml.kernel.org/r/20170320081628.18952-6-khuey@kylehuey.com
Signed-off-by: Thomas Gleixner

x86/arch_prctl/64: Rename do_arch_prctl() to do_arch_prctl_64()

2017-03-20T15:10:32+00:00

In order to introduce new arch_prctls that are not 64 bit only, rename the
existing 64 bit implementation to do_arch_prctl_64(). Also rename the
second argument of that function from 'addr' to 'arg2', because it will no
longer always be an address.

Signed-off-by: Kyle Huey 
Reviewed-by: Andy Lutomirski 
Cc: Grzegorz Andrejczuk 
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář 
Cc: Peter Zijlstra 
Cc: Dave Hansen 
Cc: Andi Kleen 
Cc: linux-kselftest@vger.kernel.org
Cc: Nadav Amit 
Cc: Robert O'Callahan 
Cc: Richard Weinberger 
Cc: "Rafael J. Wysocki" 
Cc: Borislav Petkov 
Cc: Len Brown 
Cc: Shuah Khan 
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Jeff Dike 
Cc: Alexander Viro 
Cc: user-mode-linux-user@lists.sourceforge.net
Cc: David Matlack 
Cc: Boris Ostrovsky 
Cc: Dmitry Safonov 
Cc: linux-fsdevel@vger.kernel.org
Cc: Paolo Bonzini 
Link: http://lkml.kernel.org/r/20170320081628.18952-5-khuey@kylehuey.com
Signed-off-by: Thomas Gleixner

x86/arch_prctl/64: Use SYSCALL_DEFINE2 to define sys_arch_prctl()

2017-03-20T15:10:32+00:00

Use the SYSCALL_DEFINE2 macro instead of manually defining it.

Signed-off-by: Kyle Huey 
Cc: Grzegorz Andrejczuk 
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář 
Cc: Peter Zijlstra 
Cc: Dave Hansen 
Cc: Andi Kleen 
Cc: linux-kselftest@vger.kernel.org
Cc: Nadav Amit 
Cc: Robert O'Callahan 
Cc: Richard Weinberger 
Cc: "Rafael J. Wysocki" 
Cc: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Len Brown 
Cc: Shuah Khan 
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Jeff Dike 
Cc: Alexander Viro 
Cc: user-mode-linux-user@lists.sourceforge.net
Cc: David Matlack 
Cc: Boris Ostrovsky 
Cc: Dmitry Safonov 
Cc: linux-fsdevel@vger.kernel.org
Cc: Paolo Bonzini 
Link: http://lkml.kernel.org/r/20170320081628.18952-4-khuey@kylehuey.com
Signed-off-by: Thomas Gleixner

x86/arch_prctl: Rename 'code' argument to 'option'

2017-03-20T15:10:32+00:00

The x86 specific arch_prctl() arbitrarily changed prctl's 'option' to
'code'. Before adding new options, rename it.

Signed-off-by: Kyle Huey 
Cc: Grzegorz Andrejczuk 
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář 
Cc: Peter Zijlstra 
Cc: Dave Hansen 
Cc: Andi Kleen 
Cc: linux-kselftest@vger.kernel.org
Cc: Nadav Amit 
Cc: Robert O'Callahan 
Cc: Richard Weinberger 
Cc: "Rafael J. Wysocki" 
Cc: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Len Brown 
Cc: Shuah Khan 
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Jeff Dike 
Cc: Alexander Viro 
Cc: user-mode-linux-user@lists.sourceforge.net
Cc: David Matlack 
Cc: Boris Ostrovsky 
Cc: Dmitry Safonov 
Cc: linux-fsdevel@vger.kernel.org
Cc: Paolo Bonzini 
Link: http://lkml.kernel.org/r/20170320081628.18952-3-khuey@kylehuey.com
Signed-off-by: Thomas Gleixner

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:36+00:00

We are going to split  out of , which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder  file that just
maps to  to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar