linux.git/arch/x86/kernel/kvmclock.c, branch v3.17

kvm: remove redundant registration of BSP's hv_clock area

2014-02-22T14:53:32+00:00

These days hv_clock allocation is memblock based (i.e. the percpu
allocator is not involved), which means that the physical address
of each of the per-cpu hv_clock areas is guaranteed to remain
unchanged through all its lifetime and we do not need to update
its location after CPU bring-up.

Signed-off-by: Fernando Luis Vazquez Cao 
Signed-off-by: Paolo Bonzini

pvclock: detect watchdog reset at pvclock read

2013-11-06T07:48:43+00:00

Implement reset of kernel watchdogs at pvclock read time. This avoids
adding special code to every watchdog.

This is possible for watchdogs which measure time based on sched_clock() or
ktime_get() variants.

Suggested by Don Zickus.

Acked-by: Don Zickus 
Acked-by: Paolo Bonzini 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Gleb Natapov

x86: delete __cpuinit usage from all x86 files

2013-07-14T23:36:56+00:00

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Cc: x86@kernel.org
Acked-by: Ingo Molnar 
Acked-by: Thomas Gleixner 
Acked-by: H. Peter Anvin 
Signed-off-by: Paul Gortmaker

Merge branch 'timers/posix-cpu-timers-for-tglx' of

2013-07-04T21:11:22+00:00

git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core

Frederic sayed: "Most of these patches have been hanging around for
several month now, in -mmotm for a significant chunk. They already
missed a few releases."

Signed-off-by: Thomas Gleixner

x86: kvmclock: zero initialize pvclock shared memory area

2013-06-19T10:25:28+00:00

kernel might hung in pvclock_clocksource_read() due to
uninitialized memory might contain odd version value in
following cycle:

        do {
                version = __pvclock_read_cycles(src, &ret, &flags);
        } while ((src->version & 1) || version != src->version);

if secondary kvmclock is accessed before it's registered with kvm.

Clear garbage in pvclock shared memory area right after it's
allocated to avoid this issue.

Ref: https://bugzilla.kernel.org/show_bug.cgi?id=59521
Signed-off-by: Igor Mammedov 
[See BZ for analysis.  We may want a different fix for 3.11, but
 this is the safest for now - Paolo]
Cc:  # 3.8
Signed-off-by: Paolo Bonzini

x86: Increase precision of x86_platform.get/set_wallclock()

2013-05-28T21:00:59+00:00

All the virtualized platforms (KVM, lguest and Xen) have persistent
wallclocks that have more than one second of precision.

read_persistent_wallclock() and update_persistent_wallclock() allow
for nanosecond precision but their implementation on x86 with
x86_platform.get/set_wallclock() only allows for one second precision.
This means guests may see a wallclock time that is off by up to 1
second.

Make set_wallclock() and get_wallclock() take a struct timespec
parameter (which allows for nanosecond precision) so KVM and Xen
guests may start with a more accurate wallclock time and a Xen dom0
can maintain a more accurate wallclock for guests.

Signed-off-by: David Vrabel 
Signed-off-by: John Stultz

Merge branch 'master' into queue

2013-03-04T23:10:32+00:00

* master: (15791 commits)
  Linux 3.9-rc1
  btrfs/raid56: Add missing #include 
  fix compat_sys_rt_sigprocmask()
  SUNRPC: One line comment fix
  ext4: enable quotas before orphan cleanup
  ext4: don't allow quota mount options when quota feature enabled
  ext4: fix a warning from sparse check for ext4_dir_llseek
  ext4: convert number of blocks to clusters properly
  ext4: fix possible memory leak in ext4_remount()
  jbd2: fix ERR_PTR dereference in jbd2__journal_start
  metag: Provide dma_get_sgtable()
  metag: prom.h: remove declaration of metag_dt_memblock_reserve()
  metag: copy devicetree to non-init memory
  metag: cleanup metag_ksyms.c includes
  metag: move mm/init.c exports out of metag_ksyms.c
  metag: move usercopy.c exports out of metag_ksyms.c
  metag: move setup.c exports out of metag_ksyms.c
  metag: move kick.c exports out of metag_ksyms.c
  metag: move traps.c exports out of metag_ksyms.c
  metag: move irq enable out of irqflags.h on SMP
  ...

Signed-off-by: Marcelo Tosatti 

Conflicts:
	arch/x86/kernel/kvmclock.c

x86: kvmclock: Do not setup kvmclock vsyscall in the absence of that clock

2013-02-27T11:19:18+00:00

This fixes boot lockups with "no-kvmclock", when the host is not
exposing this particular feature (QEMU: -cpu ...,-kvmclock) or when
the kvmclock initialization failed for whatever reason.

Reviewed-by: Marcelo Tosatti 
Signed-off-by: Jan Kiszka 
Signed-off-by: Gleb Natapov

Merge tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2013-02-24T21:07:18+00:00

Pull KVM updates from Marcelo Tosatti:
 "KVM updates for the 3.9 merge window, including x86 real mode
  emulation fixes, stronger memory slot interface restrictions, mmu_lock
  spinlock hold time reduction, improved handling of large page faults
  on shadow, initial APICv HW acceleration support, s390 channel IO
  based virtio, amongst others"

* tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits)
  Revert "KVM: MMU: lazily drop large spte"
  x86: pvclock kvm: align allocation size to page size
  KVM: nVMX: Remove redundant get_vmcs12 from nested_vmx_exit_handled_msr
  x86 emulator: fix parity calculation for AAD instruction
  KVM: PPC: BookE: Handle alignment interrupts
  booke: Added DBCR4 SPR number
  KVM: PPC: booke: Allow multiple exception types
  KVM: PPC: booke: use vcpu reference from thread_struct
  KVM: Remove user_alloc from struct kvm_memory_slot
  KVM: VMX: disable apicv by default
  KVM: s390: Fix handling of iscs.
  KVM: MMU: cleanup __direct_map
  KVM: MMU: remove pt_access in mmu_set_spte
  KVM: MMU: cleanup mapping-level
  KVM: MMU: lazily drop large spte
  KVM: VMX: cleanup vmx_set_cr0().
  KVM: VMX: add missing exit names to VMX_EXIT_REASONS array
  KVM: VMX: disable SMEP feature when guest is in non-paging mode
  KVM: Remove duplicate text in api.txt
  Revert "KVM: MMU: split kvm_mmu_free_page"
  ...

x86: pvclock kvm: align allocation size to page size

2013-02-19T02:05:19+00:00

To match whats mapped via vsyscalls to userspace.

Reported-by: Peter Hurley 
Signed-off-by: Marcelo Tosatti