linux.git/arch/x86/kernel/devicetree.c, branch v6.9 Linux kernel source tree Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2024-03-15T19:37:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-15T19:37:59+00:00 ab522e1478e3191114535f454a1c41ba3b2d1cb9 Pull devicetree updates from Rob Herring: "DT core: - Add cleanup.h based auto release of struct device_node pointers via __free marking and new for_each_child_of_node_scoped() iterator to use it. - Always create a base skeleton DT when CONFIG_OF is enabled. This supports several usecases of adding DT data on non-DT booted systems. - Move around some /reserved-memory code in preparation for further improvements - Add a stub for_each_property_of_node() for !OF - Adjust the printk levels on some messages - Fix __be32 sparse warning - Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver (currently orphaned) - Add Saravana Kannan and drop Frank Rowand as DT maintainers DT bindings: - Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc, fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and xlnx,sd-fec to DT schemas - Add existing, but undocumented fsl,imx-anatop binding - Add bunch of undocumented vendor prefixes used in compatible strings - Drop obsolete brcm,bcm2835-pm-wdt binding - Drop obsolete i2c.txt which as been replaced with schema in dtschema - Add DPS310 device and sort trivial-devices.yaml - Enable undocumented compatible checks on DT binding examples - More QCom maintainer fixes/updates - Updates to writing-schema.rst and DT submitting-patches.rst to cover some frequent review comments - Clean-up SPDX tags to use 'OR' rather than 'or'" * tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits) dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators of: unittest: Use for_each_child_of_node_scoped() of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling of: Add cleanup.h based auto release via __free(device_node) markings of: Move all FDT reserved-memory handling into of_reserved_mem.c of: Add KUnit test to confirm DTB is loaded of: unittest: treat missing of_root as error instead of fixing up x86/of: Unconditionally call unflatten_and_copy_device_tree() um: Unconditionally call unflatten_device_tree() of: Create of_root if no dtb provided by firmware of: Always unflatten in unflatten_and_copy_device_tree() dt-bindings: timer: mediatek: Convert to json-schema dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage dt-bindings: fsl-imx-sdma: fix HDMI audio index dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6 dt-bindings: soc: imx: fsl,imx-anatop: add binding dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML of: make for_each_property_of_node() available to to !OF ... 
Pull devicetree updates from Rob Herring:
 "DT core:

   - Add cleanup.h based auto release of struct device_node pointers via
     __free marking and new for_each_child_of_node_scoped() iterator to
     use it.

   - Always create a base skeleton DT when CONFIG_OF is enabled. This
     supports several usecases of adding DT data on non-DT booted
     systems.

   - Move around some /reserved-memory code in preparation for further
     improvements

   - Add a stub for_each_property_of_node() for !OF

   - Adjust the printk levels on some messages

   - Fix __be32 sparse warning

   - Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
     (currently orphaned)

   - Add Saravana Kannan and drop Frank Rowand as DT maintainers

  DT bindings:

   - Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
     fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
     xlnx,sd-fec to DT schemas

   - Add existing, but undocumented fsl,imx-anatop binding

   - Add bunch of undocumented vendor prefixes used in compatible
     strings

   - Drop obsolete brcm,bcm2835-pm-wdt binding

   - Drop obsolete i2c.txt which as been replaced with schema in
     dtschema

   - Add DPS310 device and sort trivial-devices.yaml

   - Enable undocumented compatible checks on DT binding examples

   - More QCom maintainer fixes/updates

   - Updates to writing-schema.rst and DT submitting-patches.rst to
     cover some frequent review comments

   - Clean-up SPDX tags to use 'OR' rather than 'or'"

* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
  dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
  of: unittest: Use for_each_child_of_node_scoped()
  of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
  of: Add cleanup.h based auto release via __free(device_node) markings
  of: Move all FDT reserved-memory handling into of_reserved_mem.c
  of: Add KUnit test to confirm DTB is loaded
  of: unittest: treat missing of_root as error instead of fixing up
  x86/of: Unconditionally call unflatten_and_copy_device_tree()
  um: Unconditionally call unflatten_device_tree()
  of: Create of_root if no dtb provided by firmware
  of: Always unflatten in unflatten_and_copy_device_tree()
  dt-bindings: timer: mediatek: Convert to json-schema
  dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
  soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
  dt-bindings: fsl-imx-sdma: fix HDMI audio index
  dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
  dt-bindings: soc: imx: fsl,imx-anatop: add binding
  dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
  dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
  of: make for_each_property_of_node() available to to !OF
  ...
x86/of: Unconditionally call unflatten_and_copy_device_tree() 2024-03-08T18:50:39+00:00 Stephen Boyd sboyd@kernel.org 2024-02-17T01:05:53+00:00 40f18dbbb42c56019b889b5b1fdce3da89e354da Call this function unconditionally so that we can populate an empty DTB on platforms that don't boot with a firmware provided or builtin DTB. There's no harm in calling unflatten_device_tree() unconditionally here. If there isn't a non-NULL 'initial_boot_params' pointer then unflatten_device_tree() returns early. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: H. Peter Anvin <hpa@zytor.com> Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240217010557.2381548-5-sboyd@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> 
Call this function unconditionally so that we can populate an empty DTB
on platforms that don't boot with a firmware provided or builtin DTB.
There's no harm in calling unflatten_device_tree() unconditionally here.
If there isn't a non-NULL 'initial_boot_params' pointer then
unflatten_device_tree() returns early.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-5-sboyd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
x86/of: Use new APIC registration functions 2024-02-15T21:07:42+00:00 Thomas Gleixner tglx@linutronix.de 2024-02-13T21:05:40+00:00 7d319c0fcae68e489fcf806cdea46a795062eaf7 No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/r/20240213210251.776009244@linutronix.de 
No functional change intended.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210251.776009244@linutronix.de
x86/dtb: Rename x86_dtb_init() 2024-02-15T21:07:40+00:00 Thomas Gleixner tglx@linutronix.de 2024-02-13T21:05:06+00:00 5faf8ec77111a699b6a566c4155511fc020f8644 x86_dtb_init() is a misnomer and it really should be used as a SMP configuration parser which is selected by the platform via x86_init::mpparse:parse_smp_config(). Rename it to x86_dtb_parse_smp_config() in preparation for that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/r/20240212154639.495992801@linutronix.de 
x86_dtb_init() is a misnomer and it really should be used as a SMP
configuration parser which is selected by the platform via
x86_init::mpparse:parse_smp_config().

Rename it to x86_dtb_parse_smp_config() in preparation for that.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.495992801@linutronix.de
x86/of: Move the x86_flattree_get_config() call out of x86_dtb_init() 2023-10-02T19:30:09+00:00 Saurabh Sengar ssengar@linux.microsoft.com 2023-08-25T07:47:36+00:00 0d294c8c4efa5c0f283a6dfc82dc014a5dbd9308 Fetching the device tree configuration before initmem_init() is necessary to allow the parsing of NUMA node information. However moving the entire x86_dtb_init() call before initmem_init() is not correct as APIC/IO-APIC enumeration has to be after initmem_init(). Thus, move the x86_flattree_get_config() call out of x86_dtb_init(), into setup_arch(), to call it before initmem_init(), and leave the ACPI/IOAPIC registration sequence as-is. [ mingo: Updated the changelog for clarity. ] Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/1692949657-16446-1-git-send-email-ssengar@linux.microsoft.com 
Fetching the device tree configuration before initmem_init() is necessary
to allow the parsing of NUMA node information. However moving the entire
x86_dtb_init() call before initmem_init() is not correct as APIC/IO-APIC enumeration
has to be after initmem_init().

Thus, move the x86_flattree_get_config() call out of x86_dtb_init(),
into setup_arch(), to call it before initmem_init(), and
leave the ACPI/IOAPIC registration sequence as-is.

[ mingo: Updated the changelog for clarity. ]

Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/1692949657-16446-1-git-send-email-ssengar@linux.microsoft.com
x86/apic: Make some APIC init functions bool 2023-08-09T18:58:20+00:00 Thomas Gleixner tglx@linutronix.de 2023-08-08T22:03:48+00:00 1751adedbd601d6a9da35de0c1e2592ac980fdfe Quite some APIC init functions are pure boolean, but use the success = 0, fail < 0 model. That's confusing as hell when reading through the code. Convert them to boolean. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest) 
Quite some APIC init functions are pure boolean, but use the success = 0,
fail < 0 model. That's confusing as hell when reading through the code.

Convert them to boolean.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
x86/of: Fix the APIC address registration 2023-08-09T18:58:19+00:00 Thomas Gleixner tglx@linutronix.de 2023-08-08T22:03:47+00:00 2906a67ac83b06b874b32bf6413a8d5e186fc33e The device tree APIC parser tries to force-enable the local APIC when it is not set in CPUID. apic_force_enable() registers the boot CPU apic on success. If that succeeds then dtb_lapic_setup() registers the local APIC again eventually with a different address. Rewrite the code so that it only registers it once. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest) 
The device tree APIC parser tries to force-enable the local APIC when it is
not set in CPUID. apic_force_enable() registers the boot CPU apic on
success.

If that succeeds then dtb_lapic_setup() registers the local APIC again
eventually with a different address.

Rewrite the code so that it only registers it once.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
x86/apic: Remove the pointless APIC version check 2023-08-09T18:58:19+00:00 Thomas Gleixner tglx@linutronix.de 2023-08-08T22:03:46+00:00 249ada2c821ff6819b5214d2f08d73aebde814eb This historical leftover is really uninteresting today. Whatever MPTABLE or MADT delivers we only trust the hardware anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest) 
This historical leftover is really uninteresting today. Whatever MPTABLE or
MADT delivers we only trust the hardware anyway.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
x86/of: Add support for boot time interrupt delivery mode configuration 2022-12-02T13:57:14+00:00 Rahul Tanwar rtanwar@maxlinear.com 2022-11-24T08:41:43+00:00 2833275568755eb937a52c358bf8bfa7125a463e Presently, init/boot time interrupt delivery mode is enumerated only for ACPI enabled systems by parsing MADT table or for older systems by parsing MP table. But for OF based x86 systems, it is assumed & hardcoded to be legacy PIC mode. This causes a boot time crash for platforms which do not provide a 8259 compliant legacy PIC. Add support for configuration of init time interrupt delivery mode for x86 OF based systems by introducing a new optional boolean property 'intel,virtual-wire-mode' for the local APIC interrupt-controller node. This property emulates IMCRP Bit 7 of MP feature info byte 2 of MP floating pointer structure. Defaults to legacy PIC mode if absent. Configures it to virtual wire compatibility mode if present. Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221124084143.21841-5-rtanwar@maxlinear.com 
Presently, init/boot time interrupt delivery mode is enumerated only for
ACPI enabled systems by parsing MADT table or for older systems by parsing
MP table. But for OF based x86 systems, it is assumed & hardcoded to be
legacy PIC mode. This causes a boot time crash for platforms which do not
provide a 8259 compliant legacy PIC.

Add support for configuration of init time interrupt delivery mode for x86
OF based systems by introducing a new optional boolean property
'intel,virtual-wire-mode' for the local APIC interrupt-controller
node. This property emulates IMCRP Bit 7 of MP feature info byte 2 of MP
floating pointer structure.

Defaults to legacy PIC mode if absent. Configures it to virtual wire
compatibility mode if present.

Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221124084143.21841-5-rtanwar@maxlinear.com
x86/of: Replace printk(KERN_LVL) with pr_lvl() 2022-12-02T13:57:14+00:00 Rahul Tanwar rtanwar@maxlinear.com 2022-11-24T08:41:42+00:00 535403323b4dcdc363e7ea265df62481b903826b Use pr_lvl() instead of the deprecated printk(KERN_LVL). Just a upgrade of print utilities usage. no functional changes. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221124084143.21841-4-rtanwar@maxlinear.com 
Use pr_lvl() instead of the deprecated printk(KERN_LVL).

Just a upgrade of print utilities usage. no functional changes.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221124084143.21841-4-rtanwar@maxlinear.com