Pull x86 resource control updates from Borislav Petkov:

 - Add a tracepoint to read out LLC occupancy of resource monitor IDs
   with the goal of freeing them sooner rather than later

 - Other code improvements and cleanups

* tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Add tracepoint for llc_occupancy tracking
  x86/resctrl: Rename pseudo_lock_event.h to trace.h
  x86/resctrl: Simplify call convention for MSR update functions
  x86/resctrl: Pass domain to target CPU

New CPU #defines encode vendor and family as well as model.

  [ bp: Squash two resctrl patches into one. ]

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181514.41848-1-tony.luck%40intel.com

Now only the pseudo-locking part uses tracepoints to do event tracking,
but other parts of resctrl may need new tracepoints. It is unnecessary
to create separate header files and define CREATE_TRACE_POINTS in
different c files which fragments the resctrl tracing.

Therefore, give the resctrl tracepoint header file a generic name to
support its use for tracepoints that are not specific to pseudo-locking.

No functional change.

Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240408092303.26413-2-haifeng.xu@shopee.com

resctrl has one mutex that is taken by the architecture-specific code, and the
filesystem parts. The two interact via cpuhp, where the architecture code
updates the domain list. Filesystem handlers that walk the domains list should
not run concurrently with the cpuhp callback modifying the list.

Exposing a lock from the filesystem code means the interface is not cleanly
defined, and creates the possibility of cross-architecture lock ordering
headaches. The interaction only exists so that certain filesystem paths are
serialised against CPU hotplug. The CPU hotplug code already has a mechanism to
do this using cpus_read_lock().

MPAM's monitors have an overflow interrupt, so it needs to be possible to walk
the domains list in irq context. RCU is ideal for this, but some paths need to
be able to sleep to allocate memory.

Because resctrl_{on,off}line_cpu() take the rdtgroup_mutex as part of a cpuhp
callback, cpus_read_lock() must always be taken first.
rdtgroup_schemata_write() already does this.

Most of the filesystem code's domain list walkers are currently protected by
the rdtgroup_mutex taken in rdtgroup_kn_lock_live().  The exceptions are
rdt_bit_usage_show() and the mon_config helpers which take the lock directly.

Make the domain list protected by RCU. An architecture-specific lock prevents
concurrent writers. rdt_bit_usage_show() could walk the domain list using RCU,
but to keep all the filesystem operations the same, this is changed to call
cpus_read_lock().  The mon_config helpers send multiple IPIs, take the
cpus_read_lock() in these cases.

The other filesystem list walkers need to be able to sleep.  Add
cpus_read_lock() to rdtgroup_kn_lock_live() so that the cpuhp callbacks can't
be invoked when file system operations are occurring.

Add lockdep_assert_cpus_held() in the cases where the rdtgroup_kn_lock_live()
call isn't obvious.

Resctrl's domain online/offline calls now need to take the rdtgroup_mutex
themselves.

  [ bp: Fold in a build fix: https://lore.kernel.org/r/87zfvwieli.ffs@tglx ]

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-25-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>

resctrl reads rdt_alloc_capable or rdt_mon_capable to determine whether any of
the resources support the corresponding features.  resctrl also uses the
static keys that affect the architecture's context-switch code to determine the
same thing.

This forces another architecture to have the same static keys.

As the static key is enabled based on the capable flag, and none of the
filesystem uses of these are in the scheduler path, move the capable flags
behind helpers, and use these in the filesystem code instead of the static key.

After this change, only the architecture code manages and uses the static keys
to ensure __resctrl_sched_in() does not need runtime checks.

This avoids multiple architectures having to define the same static keys.

Cases where the static key implicitly tested if the resctrl filesystem was
mounted all have an explicit check now.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-20-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>

MPAMs RMID values are not unique unless the CLOSID is considered as well.

alloc_rmid() expects the RMID to be an independent number.

Pass the CLOSID in to alloc_rmid(). Use this to compare indexes when
allocating. If the CLOSID is not relevant to the index, this ends up comparing
the free RMID with itself, and the first free entry will be used. With MPAM the
CLOSID is included in the index, so this becomes a walk of the free RMID
entries, until one that matches the supplied CLOSID is found.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-8-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>

x86's RMID are independent of the CLOSID. An RMID can be allocated,
used and freed without considering the CLOSID.

MPAM's equivalent feature is PMG, which is not an independent number,
it extends the CLOSID/PARTID space. For MPAM, only PMG-bits worth of
'RMID' can be allocated for a single CLOSID.
i.e. if there is 1 bit of PMG space, then each CLOSID can have two
monitor groups.

To allow resctrl to disambiguate RMID values for different CLOSID,
everything in resctrl that keeps an RMID value needs to know the CLOSID
too. This will always be ignored on x86.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-6-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>

Now that the driver core allows for struct class to be in read-only
memory, move the pseudo_lock_class structure to be declared at build
time placing it into read-only memory, instead of having to be
dynamically allocated at boot time.

Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230620144431.583290-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something.  So just remove it and fix up all callers of the function in
the kernel tree at the same time.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull driver core updates from Greg KH:
 "Here is the set of driver core and kernfs changes for 6.2-rc1.

  The "big" change in here is the addition of a new macro,
  container_of_const() that will preserve the "const-ness" of a pointer
  passed into it.

  The "problem" of the current container_of() macro is that if you pass
  in a "const *", out of it can comes a non-const pointer unless you
  specifically ask for it. For many usages, we want to preserve the
  "const" attribute by using the same call. For a specific example, this
  series changes the kobj_to_dev() macro to use it, allowing it to be
  used no matter what the const value is. This prevents every subsystem
  from having to declare 2 different individual macros (i.e.
  kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
  the const value at build time, which having 2 macros would not do
  either.

  The driver for all of this have been discussions with the Rust kernel
  developers as to how to properly mark driver core, and kobject,
  objects as being "non-mutable". The changes to the kobject and driver
  core in this pull request are the result of that, as there are lots of
  paths where kobjects and device pointers are not modified at all, so
  marking them as "const" allows the compiler to enforce this.

  So, a nice side affect of the Rust development effort has been already
  to clean up the driver core code to be more obvious about object
  rules.

  All of this has been bike-shedded in quite a lot of detail on lkml
  with different names and implementations resulting in the tiny version
  we have in here, much better than my original proposal. Lots of
  subsystem maintainers have acked the changes as well.

  Other than this change, included in here are smaller stuff like:

   - kernfs fixes and updates to handle lock contention better

   - vmlinux.lds.h fixes and updates

   - sysfs and debugfs documentation updates

   - device property updates

  All of these have been in the linux-next tree for quite a while with
  no problems"

* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
  device property: Fix documentation for fwnode_get_next_parent()
  firmware_loader: fix up to_fw_sysfs() to preserve const
  usb.h: take advantage of container_of_const()
  device.h: move kobj_to_dev() to use container_of_const()
  container_of: add container_of_const() that preserves const-ness of the pointer
  driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
  driver core: fix up missed scsi/cxlflash class.devnode() conversion.
  driver core: fix up some missing class.devnode() conversions.
  driver core: make struct class.devnode() take a const *
  driver core: make struct class.dev_uevent() take a const *
  cacheinfo: Remove of_node_put() for fw_token
  device property: Add a blank line in Kconfig of tests
  device property: Rename goto label to be more precise
  device property: Move PROPERTY_ENTRY_BOOL() a bit down
  device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
  kernfs: fix all kernel-doc warnings and multiple typos
  driver core: pass a const * into of_device_uevent()
  kobject: kset_uevent_ops: make name() callback take a const *
  kobject: kset_uevent_ops: make filter() callback take a const *
  kobject: make kobject_namespace take a const *
  ...