The kernel test robot reported kernel-doc warnings here:
monitor.c:34: warning: Cannot understand * @rmid_free_lru A least recently used list of free RMIDs on line 34 - I thought it was a doc line
monitor.c:41: warning: Cannot understand * @rmid_limbo_count count of currently unused but (potentially) on line 41 - I thought it was a doc line
monitor.c:50: warning: Cannot understand * @rmid_entry - The entry in the limbo and free lists. on line 50 - I thought it was a doc line
We don't have a syntax for documenting individual data items via
kernel-doc, so remove the "/**" kernel-doc markers and add a hyphen
for consistency.
Fixes: 6a445edce657 ("x86/intel_rdt/cqm: Add RDT monitoring initialization")
Fixes: 24247aeeabe9 ("x86/intel_rdt/cqm: Improve limbo list processing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231006235132.16227-1-rdunlap@infradead.org
Pull x86 resctrl update from Dave Hansen: "Reduce redundant counter reads with resctrl refactoring" * tag 'x86_cache_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Avoid redundant counter read in __mon_event_count()
Move the x86 documentation under Documentation/arch/ as a way of cleaning up the top-level directory and making the structure of our docs more closely match the structure of the source directories it describes. All in-kernel references to the old paths have been updated. Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-arch@vger.kernel.org Cc: x86@kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/ Signed-off-by: Jonathan Corbet <corbet@lwn.net>
__mon_event_count() does the per-RMID, per-domain work for user-initiated event count reads and the initialization of new monitor groups. In the initialization case, after resctrl_arch_reset_rmid() calls __rmid_read() to record an initial count for a new monitor group, it immediately calls resctrl_arch_rmid_read(). This re-read of the hardware counter is unnecessary and the following computations are ignored by the caller during initialization. Following return from resctrl_arch_reset_rmid(), just clear the mbm_state and return. This involves moving the mbm_state lookup into the rr->first case, as it's not needed for regular event count reads: the QOS_L3_OCCUP_EVENT_ID case was redundant with the accumulating logic at the end of the function. Signed-off-by: Peter Newman <peternewman@google.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Link: https://lore.kernel.org/all/20221220164132.443083-2-peternewman%40google.com
The event configuration for mbm_total_bytes can be changed by the user by writing to the file /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config. The event configuration settings are domain specific and affect all the CPUs in the domain. Following are the types of events supported: ==== =========================================================== Bits Description ==== =========================================================== 6 Dirty Victims from the QOS domain to all types of memory 5 Reads to slow memory in the non-local NUMA domain 4 Reads to slow memory in the local NUMA domain 3 Non-temporal writes to non-local NUMA domain 2 Non-temporal writes to local NUMA domain 1 Reads to memory in the non-local NUMA domain 0 Reads to memory in the local NUMA domain ==== =========================================================== For example: To change the mbm_total_bytes to count only reads on domain 0, the bits 0, 1, 4 and 5 needs to be set, which is 110011b (in hex 0x33). Run the command: $echo 0=0x33 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config To change the mbm_total_bytes to count all the slow memory reads on domain 1, the bits 4 and 5 needs to be set which is 110000b (in hex 0x30). Run the command: $echo 1=0x30 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lore.kernel.org/r/20230113152039.770054-12-babu.moger@amd.com
The event configuration can be viewed by the user by reading the configuration file /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config. The event configuration settings are domain specific and will affect all the CPUs in the domain. Following are the types of events supported: ==== =========================================================== Bits Description ==== =========================================================== 6 Dirty Victims from the QOS domain to all types of memory 5 Reads to slow memory in the non-local NUMA domain 4 Reads to slow memory in the local NUMA domain 3 Non-temporal writes to non-local NUMA domain 2 Non-temporal writes to local NUMA domain 1 Reads to memory in the non-local NUMA domain 0 Reads to memory in the local NUMA domain ==== =========================================================== By default, the mbm_local_bytes_config is set to 0x15 to count all the local event types. For example: $cat /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config 0=0x15;1=0x15;2=0x15;3=0x15 In this case, the event mbm_local_bytes is configured with 0x15 on domains 0 to 3. Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lore.kernel.org/r/20230113152039.770054-11-babu.moger@amd.com
The event configuration can be viewed by the user by reading the configuration file /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config. The event configuration settings are domain specific and will affect all the CPUs in the domain. Following are the types of events supported: ==== =========================================================== Bits Description ==== =========================================================== 6 Dirty Victims from the QOS domain to all types of memory 5 Reads to slow memory in the non-local NUMA domain 4 Reads to slow memory in the local NUMA domain 3 Non-temporal writes to non-local NUMA domain 2 Non-temporal writes to local NUMA domain 1 Reads to memory in the non-local NUMA domain 0 Reads to memory in the local NUMA domain ==== =========================================================== By default, the mbm_total_bytes_config is set to 0x7f to count all the event types. For example: $cat /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config 0=0x7f;1=0x7f;2=0x7f;3=0x7f In this case, the event mbm_total_bytes is configured with 0x7f on domains 0 to 3. Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lore.kernel.org/r/20230113152039.770054-10-babu.moger@amd.com
Add a new field in struct mon_evt to support Bandwidth Monitoring Event Configuration (BMEC) and also update the "mon_features" display. The resctrl file "mon_features" will display the supported events and files that can be used to configure those events if monitor configuration is supported. Before the change: $ cat /sys/fs/resctrl/info/L3_MON/mon_features llc_occupancy mbm_total_bytes mbm_local_bytes After the change when BMEC is supported: $ cat /sys/fs/resctrl/info/L3_MON/mon_features llc_occupancy mbm_total_bytes mbm_total_bytes_config mbm_local_bytes mbm_local_bytes_config Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lore.kernel.org/r/20230113152039.770054-9-babu.moger@amd.com
In an upcoming change, rdt_get_mon_l3_config() needs to call rdt_cpu_has() to query the monitor related features. It cannot be called right now because rdt_cpu_has() has the __init attribute but rdt_get_mon_l3_config() doesn't. Add the __init attribute to rdt_get_mon_l3_config() that is only called by get_rdt_mon_resources() that already has the __init attribute. Also make rdt_cpu_has() available to by rdt_get_mon_l3_config() via the internal header file. Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lore.kernel.org/r/20230113152039.770054-8-babu.moger@amd.com Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When creating a new monitoring group, the RMID allocated for it may have
been used by a group which was previously removed. In this case, the
hardware counters will have non-zero values which should be deducted
from what is reported in the new group's counts.
resctrl_arch_reset_rmid() initializes the prev_msr value for counters to
0, causing the initial count to be charged to the new group. Resurrect
__rmid_read() and use it to initialize prev_msr correctly.
Unlike before, __rmid_read() checks for error bits in the MSR read so
that callers don't need to.
Fixes: 1d81d15db39c ("x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221220164132.443083-1-peternewman@google.com