The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Pull x86 tracing updates from Ingo Molnar:
 "This tree adds IRQ vector tracepoints that are named after the handler
  and which output the vector #, based on a zero-overhead approach that
  relies on changing the IDT entries, by Seiji Aguchi.

  The new tracepoints look like this:

   # perf list | grep -i irq_vector
    irq_vectors:local_timer_entry                      [Tracepoint event]
    irq_vectors:local_timer_exit                       [Tracepoint event]
    irq_vectors:reschedule_entry                       [Tracepoint event]
    irq_vectors:reschedule_exit                        [Tracepoint event]
    irq_vectors:spurious_apic_entry                    [Tracepoint event]
    irq_vectors:spurious_apic_exit                     [Tracepoint event]
    irq_vectors:error_apic_entry                       [Tracepoint event]
    irq_vectors:error_apic_exit                        [Tracepoint event]
   [...]"

* 'x86-tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tracing: Add config option checking to the definitions of mce handlers
  trace,x86: Do not call local_irq_save() in load_current_idt()
  trace,x86: Move creation of irq tracepoints from apic.c to irq.c
  x86, trace: Add irq vector tracepoints
  x86: Rename variables for debugging
  x86, trace: Introduce entering/exiting_irq()
  tracing: Add DEFINE_EVENT_FN() macro

[Purpose of this patch]

As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.

http://www.spinics.net/lists/mm-commits/msg85707.html

<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled.  They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.

There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers.  Tracing such events gives
us the information about IRQ interaction with other system events.

The trace also tells where the system is spending its time.  We want to
know which cores are handling interrupts and how they are affecting other
processes in the system.  Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>

On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.

I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.

[Patch Description]

Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.

So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
   - local_timer_vector
   - reschedule_vector
   - call_function_vector
   - call_function_single_vector
   - irq_work_entry_vector
   - error_apic_vector
   - thermal_apic_vector
   - threshold_apic_vector
   - spurious_apic_vector
   - x86_platform_ipi_vector

Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
 - Create trace irq handlers with entering_irq()/exiting_irq().
 - Create a new IDT, trace_idt_table, at boot time by adding a logic to
   _set_gate(). It is just a copy of original idt table.
 - Register the new handlers for tracpoints to the new IDT by introducing
   macros to alloc_intr_gate() called at registering time of irq_vector handlers.
 - Add checking, whether irq vector tracing is on/off, into load_current_idt().
   This has to be done below debug checking for these reasons.
   - Switching to debug IDT may be kicked while tracing is enabled.
   - On the other hands, switching to trace IDT is kicked only when debugging
     is disabled.

In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>

Rename variables for debugging to describe meaning of them precisely.

Also, introduce a generic way to switch IDT by checking a current state,
debug on/off.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323A8.7050905@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>

We want to use this in early code where alternatives might not have run
yet and for that case we fall back to the dynamic boot_cpu_has.

For that, force a 5-byte jump since the compiler could be generating
differently sized jumps for each label.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1370772454-6106-5-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

static_cpu_has may be used only after alternatives have run. Before that
it always returns false if constant folding with __builtin_constant_p()
doesn't happen. And you don't want that.

This patch is the result of me debugging an issue where I overzealously
put static_cpu_has in code which executed before alternatives have run
and had to spend some time with scratching head and cursing at the
monitor.

So add a jump to a warning which screams loudly when we use this
function too early. The alternatives patch that check away in
conjunction with patching the rest of the kernel image.

[ hpa: factored this into its own configuration option.  If we want to
  have an overarching option, it should be an option which selects
  other options, not as a group option in the source code. ]

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1370772454-6106-4-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

This will be used in alternatives later as an always-replace flag.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1370772454-6106-2-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Reimplement FPU detection code in C and drop old, not-so-recommended
detection method in asm. Move all the relevant stuff into i387.c where
it conceptually belongs. Finally drop cpuinfo_x86.hard_math.

[ hpa: huge thanks to Borislav for taking my original concept patch
  and productizing it ]

[ Boris, note to self: do not use static_cpu_has before alternatives! ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1367244262-29511-2-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/1365436666-9837-2-git-send-email-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

We add another 32-bit vector at the end of the ->x86_capability
bitvector which collects bugs present in CPUs. After all, a CPU bug is a
kind of a capability, albeit a strange one.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1363788448-31325-2-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

In 64 bit, load ucode on AP in cpu_init().

In 32 bit, show ucode loading info on AP in cpu_init(). Microcode has been
loaded earlier before paging. Now it is safe to show the loading microcode
info on this AP.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-5-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>