linux.git/arch/x86/kernel/cpu/bugs.c, branch v4.15

x86/retpoline: Fill RSB on context switch for affected CPUs

2018-01-14T23:32:44+00:00

On context switch from a shallow call stack to a deeper one, as the CPU
does 'ret' up the deeper side it may encounter RSB entries (predictions for
where the 'ret' goes to) which were populated in userspace.

This is problematic if neither SMEP nor KPTI (the latter of which marks
userspace pages as NX for the kernel) are active, as malicious code in
userspace may then be executed speculatively.

Overwrite the CPU's return prediction stack with calls which are predicted
to return to an infinite loop, to "capture" speculation if this
happens. This is required both for retpoline, and also in conjunction with
IBRS for !SMEP && !KPTI.

On Skylake+ the problem is slightly different, and an *underflow* of the
RSB may cause errant branch predictions to occur. So there it's not so much
overwrite, as *filling* the RSB to attempt to prevent it getting
empty. This is only a partial solution for Skylake+ since there are many
other conditions which may result in the RSB becoming empty. The full
solution on Skylake+ is to use IBRS, which will prevent the problem even
when the RSB becomes empty. With IBRS, the RSB-stuffing will not be
required on context switch.

[ tglx: Added missing vendor check and slighty massaged comments and
  	changelog ]

Signed-off-by: David Woodhouse 
Signed-off-by: Thomas Gleixner 
Acked-by: Arjan van de Ven 
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel 
Cc: Andi Kleen 
Cc: Josh Poimboeuf 
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra 
Cc: Linus Torvalds 
Cc: Jiri Kosina 
Cc: Andy Lutomirski 
Cc: Dave Hansen 
Cc: Kees Cook 
Cc: Tim Chen 
Cc: Greg Kroah-Hartman 
Cc: Paul Turner 
Link: https://lkml.kernel.org/r/1515779365-9032-1-git-send-email-dwmw@amazon.co.uk

x86/spectre: Add boot time option to select Spectre v2 mitigation

2018-01-11T23:14:29+00:00

Add a spectre_v2= option to select the mitigation used for the indirect
branch speculation vulnerability.

Currently, the only option available is retpoline, in its various forms.
This will be expanded to cover the new IBRS/IBPB microcode features.

The RETPOLINE_AMD feature relies on a serializing LFENCE for speculation
control. For AMD hardware, only set RETPOLINE_AMD if LFENCE is a
serializing instruction, which is indicated by the LFENCE_RDTSC feature.

[ tglx: Folded back the LFENCE/AMD fixes and reworked it so IBRS
  	integration becomes simple ]

Signed-off-by: David Woodhouse 
Signed-off-by: Thomas Gleixner 
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel 
Cc: Andi Kleen 
Cc: Josh Poimboeuf 
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra 
Cc: Linus Torvalds 
Cc: Jiri Kosina 
Cc: Andy Lutomirski 
Cc: Dave Hansen 
Cc: Kees Cook 
Cc: Tim Chen 
Cc: Greg Kroah-Hartman 
Cc: Paul Turner 
Link: https://lkml.kernel.org/r/1515707194-20531-5-git-send-email-dwmw@amazon.co.uk

x86/cpu: Implement CPU vulnerabilites sysfs functions

2018-01-08T10:10:40+00:00

Implement the CPU vulnerabilty show functions for meltdown, spectre_v1 and
spectre_v2.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Konrad Rzeszutek Wilk 
Cc: Peter Zijlstra 
Cc: Will Deacon 
Cc: Dave Hansen 
Cc: Linus Torvalds 
Cc: Borislav Petkov 
Cc: David Woodhouse 
Link: https://lkml.kernel.org/r/20180107214913.177414879@linutronix.de

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier

2017-09-17T16:59:08+00:00

Otherwise we might have the PCID feature bit set during cpu_init().

This is just for robustness.  I haven't seen any actual bugs here.

Signed-off-by: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: cba4671af755 ("x86/mm: Disable PCID on 32-bit kernels")
Link: http://lkml.kernel.org/r/b16dae9d6b0db5d9801ddbebbfd83384097c61f3.1505663533.git.luto@kernel.org
Signed-off-by: Ingo Molnar

x86/mm: Disable PCID on 32-bit kernels

2017-07-05T08:52:57+00:00

32-bit kernels on new hardware will see PCID in CPUID, but PCID can
only be used in 64-bit mode.  Rather than making all PCID code
conditional, just disable the feature on 32-bit builds.

Signed-off-by: Andy Lutomirski 
Reviewed-by: Nadav Amit 
Reviewed-by: Borislav Petkov 
Reviewed-by: Thomas Gleixner 
Cc: Andrew Morton 
Cc: Arjan van de Ven 
Cc: Borislav Petkov 
Cc: Dave Hansen 
Cc: Linus Torvalds 
Cc: Mel Gorman 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/2e391769192a4d31b808410c383c6bf0734bc6ea.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar

x86: use set_memory.h header

2017-05-09T00:15:13+00:00

set_memory_* functions have moved to set_memory.h.  Switch to this
explicitly.

Link: http://lkml.kernel.org/r/1488920133-27229-6-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott 
Acked-by: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

x86/cpu: Merge bugs.c and bugs_64.c

2016-10-25T09:48:50+00:00

Should be easier when following boot paths. It probably is a left over
from the x86 unification eons ago.

No functionality change.

Signed-off-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20161024173844.23038-3-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/fpu: Move various internal function prototypes to fpu/internal.h

2015-05-19T13:47:48+00:00

There are a number of FPU internal function prototypes and an inline function
in fpu/api.h, mostly placed so historically as the code grew over the years.

Move them over into fpu/internal.h where they belong. (Add sched.h include
to stackprotector.h which incorrectly relied on getting it from fpu/api.h.)

fpu/api.h is now a pure file that only contains FPU APIs intended for driver
use.

Reviewed-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Dave Hansen 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Signed-off-by: Ingo Molnar

x86/fpu: Rename i387.h to fpu/api.h

2015-05-19T13:47:30+00:00

We already have fpu/types.h, move i387.h to fpu/api.h.

The file name has become a misnomer anyway: it offers generic FPU APIs,
but is not limited to i387 functionality.

Reviewed-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Dave Hansen 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Signed-off-by: Ingo Molnar