linux.git/arch/x86/include, branch v6.14 Linux kernel source tree Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm 2025-03-09T19:04:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-03-09T19:04:08+00:00 a382b06d297e78ed7ac67afd0d8e8690406ac4ca Pull KVM fixes from Paolo Bonzini: "arm64: - Fix a couple of bugs affecting pKVM's PSCI relay implementation when running in the hVHE mode, resulting in the host being entered with the MMU in an unknown state, and EL2 being in the wrong mode x86: - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with the host's value, which can lead to unexpected bus lock #DBs - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly emulate BTF. KVM's lack of context switching has meant BTF has always been broken to some extent - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest can enable DebugSwap without KVM's knowledge - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO memory" phase without actually generating a write-protection fault - Fix a printf() goof in the SEV smoke test that causes build failures with -Werror - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2 isn't supported by KVM" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM KVM: selftests: Fix printf() format goof in SEV smoke test KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3 KVM: SVM: Save host DR masks on CPUs with DebugSwap KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu() KVM: arm64: Initialize HCR_EL2.E2H early KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled KVM: x86: Snapshot the host's DEBUGCTL in common x86 KVM: SVM: Suppress DEBUGCTL.BTF on AMD KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value KVM: selftests: Assert that STI blocking isn't set after event injection KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow 
Pull KVM fixes from Paolo Bonzini:
 "arm64:

   - Fix a couple of bugs affecting pKVM's PSCI relay implementation
     when running in the hVHE mode, resulting in the host being entered
     with the MMU in an unknown state, and EL2 being in the wrong mode

  x86:

   - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow

   - Ensure DEBUGCTL is context switched on AMD to avoid running the
     guest with the host's value, which can lead to unexpected bus lock
     #DBs

   - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
     properly emulate BTF. KVM's lack of context switching has meant BTF
     has always been broken to some extent

   - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
     the guest can enable DebugSwap without KVM's knowledge

   - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
     to RO memory" phase without actually generating a write-protection
     fault

   - Fix a printf() goof in the SEV smoke test that causes build
     failures with -Werror

   - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
     PERFMON_V2 isn't supported by KVM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
  KVM: selftests: Fix printf() format goof in SEV smoke test
  KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
  KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
  KVM: SVM: Save host DR masks on CPUs with DebugSwap
  KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
  KVM: arm64: Initialize HCR_EL2.E2H early
  KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
  KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
  KVM: x86: Snapshot the host's DEBUGCTL in common x86
  KVM: SVM: Suppress DEBUGCTL.BTF on AMD
  KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
  KVM: selftests: Assert that STI blocking isn't set after event injection
  KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
Merge tag 'kvm-x86-fixes-6.14-rcN.2' of https://github.com/kvm-x86/linux into HEAD 2025-03-09T07:44:06+00:00 Paolo Bonzini pbonzini@redhat.com 2025-03-09T07:44:06+00:00 ea9bd29a9c0d757b3384ae3e633e6bbaddf00725 KVM x86 fixes for 6.14-rcN #2 - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow. - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with the host's value, which can lead to unexpected bus lock #DBs. - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly emulate BTF. KVM's lack of context switching has meant BTF has always been broken to some extent. - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest can enable DebugSwap without KVM's knowledge. - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO memory" phase without actually generating a write-protection fault. - Fix a printf() goof in the SEV smoke test that causes build failures with -Werror. - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2 isn't supported by KVM. 
KVM x86 fixes for 6.14-rcN #2

 - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.

 - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
   the host's value, which can lead to unexpected bus lock #DBs.

 - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
   emulate BTF.  KVM's lack of context switching has meant BTF has always been
   broken to some extent.

 - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
   can enable DebugSwap without KVM's knowledge.

 - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
   memory" phase without actually generating a write-protection fault.

 - Fix a printf() goof in the SEV smoke test that causes build failures with
   -Werror.

 - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
   isn't supported by KVM.
x86/mm: Define PTRS_PER_PMD for assembly code too 2025-03-07T23:09:09+00:00 Ingo Molnar mingo@kernel.org 2025-03-06T22:00:16+00:00 6914f7e2e25fac9d1d2b62c208eaa5f2bf810fe9 Andy reported the following build warning from head_32.S: In file included from arch/x86/kernel/head_32.S:29: arch/x86/include/asm/pgtable_32.h:59:5: error: "PTRS_PER_PMD" is not defined, evaluates to 0 [-Werror=undef] 59 | #if PTRS_PER_PMD > 1 The reason is that on 2-level i386 paging the folded in PMD's PTRS_PER_PMD constant is not defined in assembly headers, only in generic MM C headers. Instead of trying to fish out the definition from the generic headers, just define it - it even has a comment for it already... Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/Z8oa8AUVyi2HWfo9@gmail.com 
Andy reported the following build warning from head_32.S:

  In file included from arch/x86/kernel/head_32.S:29:
  arch/x86/include/asm/pgtable_32.h:59:5: error: "PTRS_PER_PMD" is not defined, evaluates to 0 [-Werror=undef]
       59 | #if PTRS_PER_PMD > 1

The reason is that on 2-level i386 paging the folded in PMD's
PTRS_PER_PMD constant is not defined in assembly headers,
only in generic MM C headers.

Instead of trying to fish out the definition from the generic
headers, just define it - it even has a comment for it already...

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z8oa8AUVyi2HWfo9@gmail.com
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex 2025-03-07T13:09:33+00:00 Alexey Kardashevskiy aik@amd.com 2025-03-07T01:37:00+00:00 3e385c0d6ce88ac9916dcf84267bd5855d830748 Compared to the SNP Guest Request, the "Extended" version adds data pages for receiving certificates. If not enough pages provided, the HV can report to the VM how much is needed so the VM can reallocate and repeat. Commit ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex") moved handling of the allocated/desired pages number out of scope of said mutex and create a possibility for a race (multiple instances trying to trigger Extended request in a VM) as there is just one instance of snp_msg_desc per /dev/sev-guest and no locking other than snp_cmd_mutex. Fix the issue by moving the data blob/size and the GHCB input struct (snp_req_data) into snp_guest_req which is allocated on stack now and accessed by the GHCB caller under that mutex. Stop allocating SEV_FW_BLOB_MAX_SIZE in snp_msg_alloc() as only one of four callers needs it. Free the received blob in get_ext_report() right after it is copied to the userspace. Possible future users of snp_send_guest_request() are likely to have different ideas about the buffer size anyways. Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex") Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Nikunj A Dadhania <nikunj@amd.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250307013700.437505-3-aik@amd.com 
Compared to the SNP Guest Request, the "Extended" version adds data pages for
receiving certificates. If not enough pages provided, the HV can report to the
VM how much is needed so the VM can reallocate and repeat.

Commit

  ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")

moved handling of the allocated/desired pages number out of scope of said
mutex and create a possibility for a race (multiple instances trying to
trigger Extended request in a VM) as there is just one instance of
snp_msg_desc per /dev/sev-guest and no locking other than snp_cmd_mutex.

Fix the issue by moving the data blob/size and the GHCB input struct
(snp_req_data) into snp_guest_req which is allocated on stack now and accessed
by the GHCB caller under that mutex.

Stop allocating SEV_FW_BLOB_MAX_SIZE in snp_msg_alloc() as only one of four
callers needs it. Free the received blob in get_ext_report() right after it is
copied to the userspace. Possible future users of snp_send_guest_request() are
likely to have different ideas about the buffer size anyways.

Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-3-aik@amd.com
x86/speculation: Add a conditional CS prefix to CALL_NOSPEC 2025-03-03T11:04:43+00:00 Pawan Gupta pawan.kumar.gupta@linux.intel.com 2025-03-01T02:35:58+00:00 9af9ad85ac44cb754e526d468c3006b48db5dfd8 Retpoline mitigation for spectre-v2 uses thunks for indirect branches. To support this mitigation compilers add a CS prefix with -mindirect-branch-cs-prefix. For an indirect branch in asm, this needs to be added manually. CS prefix is already being added to indirect branches in asm files, but not in inline asm. Add CS prefix to CALL_NOSPEC for inline asm as well. There is no JMP_NOSPEC for inline asm. Reported-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250228-call-nospec-v3-2-96599fed0f33@linux.intel.com 
Retpoline mitigation for spectre-v2 uses thunks for indirect branches. To
support this mitigation compilers add a CS prefix with
-mindirect-branch-cs-prefix. For an indirect branch in asm, this needs to
be added manually.

CS prefix is already being added to indirect branches in asm files, but not
in inline asm. Add CS prefix to CALL_NOSPEC for inline asm as well. There
is no JMP_NOSPEC for inline asm.

Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-2-96599fed0f33@linux.intel.com
x86/speculation: Simplify and make CALL_NOSPEC consistent 2025-03-03T11:04:42+00:00 Pawan Gupta pawan.kumar.gupta@linux.intel.com 2025-03-01T02:35:43+00:00 010c4a461c1dbf3fa75ddea8df018a6128b700c6 CALL_NOSPEC macro is used to generate Spectre-v2 mitigation friendly indirect branches. At compile time the macro defaults to indirect branch, and at runtime those can be patched to thunk based mitigations. This approach is opposite of what is done for the rest of the kernel, where the compile time default is to replace indirect calls with retpoline thunk calls. Make CALL_NOSPEC consistent with the rest of the kernel, default to retpoline thunk at compile time when CONFIG_MITIGATION_RETPOLINE is enabled. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250228-call-nospec-v3-1-96599fed0f33@linux.intel.com 
CALL_NOSPEC macro is used to generate Spectre-v2 mitigation friendly
indirect branches. At compile time the macro defaults to indirect branch,
and at runtime those can be patched to thunk based mitigations.

This approach is opposite of what is done for the rest of the kernel, where
the compile time default is to replace indirect calls with retpoline thunk
calls.

Make CALL_NOSPEC consistent with the rest of the kernel, default to
retpoline thunk at compile time when CONFIG_MITIGATION_RETPOLINE is
enabled.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-1-96599fed0f33@linux.intel.com
KVM: x86: Snapshot the host's DEBUGCTL in common x86 2025-02-28T17:17:45+00:00 Sean Christopherson seanjc@google.com 2025-02-27T22:24:08+00:00 fb71c795935652fa20eaf9517ca9547f5af99a76 Move KVM's snapshot of DEBUGCTL to kvm_vcpu_arch and take the snapshot in common x86, so that SVM can also use the snapshot. Opportunistically change the field to a u64. While bits 63:32 are reserved on AMD, not mentioned at all in Intel's SDM, and managed as an "unsigned long" by the kernel, DEBUGCTL is an MSR and therefore a 64-bit value. Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Cc: stable@vger.kernel.org Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20250227222411.3490595-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> 
Move KVM's snapshot of DEBUGCTL to kvm_vcpu_arch and take the snapshot in
common x86, so that SVM can also use the snapshot.

Opportunistically change the field to a u64.  While bits 63:32 are reserved
on AMD, not mentioned at all in Intel's SDM, and managed as an "unsigned
long" by the kernel, DEBUGCTL is an MSR and therefore a 64-bit value.

Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2025-02-16T18:41:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-02-16T18:41:50+00:00 ff1848d81ca63e49bce57c29ffb12c6539333ac4 Pull x86 perf fixes from Borislav Petkov: - Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being enabled after handoff to the OS - Check CPUID(0x23) leaf and subleafs presence properly - Remove the PEBS-via-PT feature from being supported on hybrid systems - Fix perf record/top default commands on systems without a raw PMU registered * tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Ensure LBRs are disabled when a CPU is starting perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF perf/x86/intel: Clean up PEBS-via-PT on hybrid perf/x86/rapl: Fix the error checking order 
Pull x86 perf fixes from Borislav Petkov:

 - Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
   enabled after handoff to the OS

 - Check CPUID(0x23) leaf and subleafs presence properly

 - Remove the PEBS-via-PT feature from being supported on hybrid systems

 - Fix perf record/top default commands on systems without a raw PMU
   registered

* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
  perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
  perf/x86/intel: Clean up PEBS-via-PT on hybrid
  perf/x86/rapl: Fix the error checking order
Merge tag 'kvm-x86-fixes-6.14-rcN' of https://github.com/kvm-x86/linux into HEAD 2025-02-15T00:08:35+00:00 Paolo Bonzini pbonzini@redhat.com 2025-02-15T00:08:35+00:00 d3d0b8dfe06098d6d584266c35e9a0947f5b7132 KVM fixes for 6.14 part 1 - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference. - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1. - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath. 
KVM fixes for 6.14 part 1

 - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
   by KVM to fix a NULL pointer dereference.

 - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
   nested NPT MMU so that the MMU is properly tagged for L2, not L1.

 - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
   guest's value may be stale if a VM-Exit is handled in the fastpath.
x86/sev: Fix broken SNP support with KVM module built-in 2025-02-14T23:39:19+00:00 Ashish Kalra ashish.kalra@amd.com 2025-02-10T22:54:18+00:00 409f45387c937145adeeeebc6d6032c2ec232b35 Fix issues with enabling SNP host support and effectively SNP support which is broken with respect to the KVM module being built-in. SNP host support is enabled in snp_rmptable_init() which is invoked as device_initcall(). SNP check on IOMMU is done during IOMMU PCI init (IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is currently invoked via device_initcall() and cannot be invoked via subsys_initcall() as core IOMMU subsystem gets initialized via subsys_initcall(). Now, if kvm_amd module is built-in, it gets initialized before SNP host support is enabled in snp_rmptable_init() : [ 10.131811] kvm_amd: TSC scaling supported [ 10.136384] kvm_amd: Nested Virtualization enabled [ 10.141734] kvm_amd: Nested Paging enabled [ 10.146304] kvm_amd: LBR virtualization supported [ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509) [ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99) [ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99) [ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported [ 10.177052] kvm_amd: Virtual GIF supported ... ... [ 10.201648] kvm_amd: in svm_enable_virtualization_cpu And then svm_x86_ops->enable_virtualization_cpu() (svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following: wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa); So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs. snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu() as following : ... [ 11.256138] kvm_amd: in svm_enable_virtualization_cpu ... [ 11.264918] SEV-SNP: in snp_rmptable_init This triggers a #GP exception in snp_rmptable_init() when snp_enable() is invoked to set SNP_EN in SYSCFG MSR: [ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30) ... [ 11.294404] Call Trace: [ 11.294482] <IRQ> [ 11.294513] ? show_stack_regs+0x26/0x30 [ 11.294522] ? ex_handler_msr+0x10f/0x180 [ 11.294529] ? search_extable+0x2b/0x40 [ 11.294538] ? fixup_exception+0x2dd/0x340 [ 11.294542] ? exc_general_protection+0x14f/0x440 [ 11.294550] ? asm_exc_general_protection+0x2b/0x30 [ 11.294557] ? __pfx_snp_enable+0x10/0x10 [ 11.294567] ? native_write_msr+0x8/0x30 [ 11.294570] ? __snp_enable+0x5d/0x70 [ 11.294575] snp_enable+0x19/0x20 [ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0 [ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20 [ 11.294589] __sysvec_call_function+0x20/0x90 [ 11.294596] sysvec_call_function+0x80/0xb0 [ 11.294601] </IRQ> [ 11.294603] <TASK> [ 11.294605] asm_sysvec_call_function+0x1f/0x30 ... [ 11.294631] arch_cpu_idle+0xd/0x20 [ 11.294633] default_idle_call+0x34/0xd0 [ 11.294636] do_idle+0x1f1/0x230 [ 11.294643] ? complete+0x71/0x80 [ 11.294649] cpu_startup_entry+0x30/0x40 [ 11.294652] start_secondary+0x12d/0x160 [ 11.294655] common_startup_64+0x13e/0x141 [ 11.294662] </TASK> This #GP exception is getting triggered due to the following errata for AMD family 19h Models 10h-1Fh Processors: Processor may generate spurious #GP(0) Exception on WRMSR instruction: Description: The Processor will generate a spurious #GP(0) Exception on a WRMSR instruction if the following conditions are all met: - the target of the WRMSR is a SYSCFG register. - the write changes the value of SYSCFG.SNPEn from 0 to 1. - One of the threads that share the physical core has a non-zero value in the VM_HSAVE_PA MSR. The document being referred to above: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf To summarize, with kvm_amd module being built-in, KVM/SVM initialization happens before host SNP is enabled and this SVM initialization sets VM_HSAVE_PA to non-zero, which then triggers a #GP when SYSCFG.SNPEn is being set and this will subsequently cause SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not set on all CPUs. Essentially SNP host enabling code should be invoked before KVM initialization, which is currently not the case when KVM is built-in. Add fix to call snp_rmptable_init() early from iommu_snp_enable() directly and not invoked via device_initcall() which enables SNP host support before KVM initialization with kvm_amd module built-in. Add additional handling for `iommu=off` or `amd_iommu=off` options. Note that IOMMUs need to be enabled for SNP initialization, therefore, if host SNP support is enabled but late IOMMU initialization fails then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity checks in SNP firmware will fail with invalid configuration error as below: [ 9.723114] ccp 0000:23:00.1: sev enabled [ 9.727602] ccp 0000:23:00.1: psp enabled [ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002) [ 9.739098] ccp 0000:a2:00.1: no command queues available [ 9.745167] ccp 0000:a2:00.1: psp enabled [ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3 [ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5 Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature") Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de> Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 
Fix issues with enabling SNP host support and effectively SNP support
which is broken with respect to the KVM module being built-in.

SNP host support is enabled in snp_rmptable_init() which is invoked as
device_initcall(). SNP check on IOMMU is done during IOMMU PCI init
(IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is
currently invoked via device_initcall() and cannot be invoked via
subsys_initcall() as core IOMMU subsystem gets initialized via
subsys_initcall().

Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :

[   10.131811] kvm_amd: TSC scaling supported
[   10.136384] kvm_amd: Nested Virtualization enabled
[   10.141734] kvm_amd: Nested Paging enabled
[   10.146304] kvm_amd: LBR virtualization supported
[   10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509)
[   10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99)
[   10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99)
[   10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported
[   10.177052] kvm_amd: Virtual GIF supported
...
...
[   10.201648] kvm_amd: in svm_enable_virtualization_cpu

And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);

So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.

snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[   11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[   11.264918] SEV-SNP: in snp_rmptable_init

This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:

[   11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30)
...
[   11.294404] Call Trace:
[   11.294482]  <IRQ>
[   11.294513]  ? show_stack_regs+0x26/0x30
[   11.294522]  ? ex_handler_msr+0x10f/0x180
[   11.294529]  ? search_extable+0x2b/0x40
[   11.294538]  ? fixup_exception+0x2dd/0x340
[   11.294542]  ? exc_general_protection+0x14f/0x440
[   11.294550]  ? asm_exc_general_protection+0x2b/0x30
[   11.294557]  ? __pfx_snp_enable+0x10/0x10
[   11.294567]  ? native_write_msr+0x8/0x30
[   11.294570]  ? __snp_enable+0x5d/0x70
[   11.294575]  snp_enable+0x19/0x20
[   11.294578]  __flush_smp_call_function_queue+0x9c/0x3a0
[   11.294586]  generic_smp_call_function_single_interrupt+0x17/0x20
[   11.294589]  __sysvec_call_function+0x20/0x90
[   11.294596]  sysvec_call_function+0x80/0xb0
[   11.294601]  </IRQ>
[   11.294603]  <TASK>
[   11.294605]  asm_sysvec_call_function+0x1f/0x30
...
[   11.294631]  arch_cpu_idle+0xd/0x20
[   11.294633]  default_idle_call+0x34/0xd0
[   11.294636]  do_idle+0x1f1/0x230
[   11.294643]  ? complete+0x71/0x80
[   11.294649]  cpu_startup_entry+0x30/0x40
[   11.294652]  start_secondary+0x12d/0x160
[   11.294655]  common_startup_64+0x13e/0x141
[   11.294662]  </TASK>

This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:

Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.

The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf

To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.

Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.

Add fix to call snp_rmptable_init() early from iommu_snp_enable()
directly and not invoked via device_initcall() which enables SNP host
support before KVM initialization with kvm_amd module built-in.

Add additional handling for `iommu=off` or `amd_iommu=off` options.

Note that IOMMUs need to be enabled for SNP initialization, therefore,
if host SNP support is enabled but late IOMMU initialization fails
then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity
checks in SNP firmware will fail with invalid configuration error as
below:

[    9.723114] ccp 0000:23:00.1: sev enabled
[    9.727602] ccp 0000:23:00.1: psp enabled
[    9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002)
[    9.739098] ccp 0000:a2:00.1: no command queues available
[    9.745167] ccp 0000:a2:00.1: psp enabled
[    9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3
[    9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5

Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature")
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>