linux.git/arch/x86/include, branch v5.12

Merge branch 'akpm' (patches from Andrew)

2021-04-10T00:06:32+00:00

Merge misc fixes from Andrew Morton:
 "14 patches.

  Subsystems affected by this patch series: mm (kasan, gup, pagecache,
  and kfence), MAINTAINERS, mailmap, nds32, gcov, ocfs2, ia64, and lib"

* emailed patches from Andrew Morton :
  lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS
  kfence, x86: fix preemptible warning on KPTI-enabled systems
  lib/test_kasan_module.c: suppress unused var warning
  kasan: fix conflict with page poisoning
  fs: direct-io: fix missing sdio->boundary
  ia64: fix user_stack_pointer() for ptrace()
  ocfs2: fix deadlock between setattr and dio_end_io_write
  gcov: re-fix clang-11+ support
  nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff
  mm/gup: check page posion status for coredump.
  .mailmap: fix old email addresses
  mailmap: update email address for Jordan Crouse
  treewide: change my e-mail address, fix my name
  MAINTAINERS: update CZ.NIC's Turris information

kfence, x86: fix preemptible warning on KPTI-enabled systems

2021-04-09T21:54:23+00:00

On systems with KPTI enabled, we can currently observe the following
warning:

  BUG: using smp_processor_id() in preemptible
  caller is invalidate_user_asid+0x13/0x50
  CPU: 6 PID: 1075 Comm: dmesg Not tainted 5.12.0-rc4-gda4a2b1a5479-kfence_1+ #1
  Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012
  Call Trace:
   dump_stack+0x7f/0xad
   check_preemption_disabled+0xc8/0xd0
   invalidate_user_asid+0x13/0x50
   flush_tlb_one_kernel+0x5/0x20
   kfence_protect+0x56/0x80
   ...

While it normally makes sense to require preemption to be off, so that
the expected CPU's TLB is flushed and not another, in our case it really
is best-effort (see comments in kfence_protect_page()).

Avoid the warning by disabling preemption around flush_tlb_one_kernel().

Link: https://lore.kernel.org/lkml/YGIDBAboELGgMgXy@elver.google.com/
Link: https://lkml.kernel.org/r/20210330065737.652669-1-elver@google.com
Signed-off-by: Marco Elver 
Reported-by: Tomi Sarvela 
Cc: Alexander Potapenko 
Cc: Dmitry Vyukov 
Cc: Andrey Konovalov 
Cc: Jann Horn 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m

2021-04-07T17:02:43+00:00

Commit 8cdddd182bd7 ("ACPI: processor: Fix CPU0 wakeup in
acpi_idle_play_dead()") tried to fix CPU0 hotplug breakage by copying
wakeup_cpu0() + start_cpu0() logic from hlt_play_dead()//mwait_play_dead()
into acpi_idle_play_dead(). The problem is that these functions are not
exported to modules so when CONFIG_ACPI_PROCESSOR=m build fails.

The issue could've been fixed by exporting both wakeup_cpu0()/start_cpu0()
(the later from assembly) but it seems putting the whole pattern into a
new function and exporting it instead is better.

Reported-by: kernel test robot 
Fixes: 8cdddd182bd7 ("CPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()")
Cc:  # 5.10+
Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: Rafael J. Wysocki

ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()

2021-04-01T11:37:55+00:00

Commit 496121c02127 ("ACPI: processor: idle: Allow probing on platforms
with one ACPI C-state") broke CPU0 hotplug on certain systems, e.g.
I'm observing the following on AWS Nitro (e.g r5b.xlarge but other
instance types are affected as well):

 # echo 0 > /sys/devices/system/cpu/cpu0/online
 # echo 1 > /sys/devices/system/cpu/cpu0/online
 <10 seconds delay>
 -bash: echo: write error: Input/output error

In fact, the above mentioned commit only revealed the problem and did
not introduce it. On x86, to wakeup CPU an NMI is being used and
hlt_play_dead()/mwait_play_dead() loops are prepared to handle it:

	/*
	 * If NMI wants to wake up CPU0, start CPU0.
	 */
	if (wakeup_cpu0())
		start_cpu0();

cpuidle_play_dead() -> acpi_idle_play_dead() (which is now being called on
systems where it wasn't called before the above mentioned commit) serves
the same purpose but it doesn't have a path for CPU0. What happens now on
wakeup is:
 - NMI is sent to CPU0
 - wakeup_cpu0_nmi() works as expected
 - we get back to while (1) loop in acpi_idle_play_dead()
 - safe_halt() puts CPU0 to sleep again.

The straightforward/minimal fix is add the special handling for CPU0 on x86
and that's what the patch is doing.

Fixes: 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Vitaly Kuznetsov 
Cc: 5.10+  # 5.10+
Signed-off-by: Rafael J. Wysocki

Merge tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2021-03-26T18:15:25+00:00

Pull xen fixes from Juergen Gross:
 "This contains a small series with a more elegant fix of a problem
  which was originally fixed in rc2"

* tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"
  xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUG

Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"

2021-03-24T23:33:36+00:00

This partially reverts commit 882213990d32 ("xen: fix p2m size in dom0
for disabled memory hotplug case")

There's no need to special case XEN_UNPOPULATED_ALLOC anymore in order
to correctly size the p2m. The generic memory hotplug option has
already been tied together with the Xen hotplug limit, so enabling
memory hotplug should already trigger a properly sized p2m on Xen PV.

Note that XEN_UNPOPULATED_ALLOC depends on ZONE_DEVICE which pulls in
MEMORY_HOTPLUG.

Leave the check added to __set_phys_to_machine and the adjusted
comment about EXTRA_MEM_RATIO.

Signed-off-by: Roger Pau Monné 
Reviewed-by: Boris Ostrovsky 
Link: https://lore.kernel.org/r/20210324122424.58685-3-roger.pau@citrix.com

[boris: fixed formatting issues]
Signed-off-by: Boris Ostrovsky

Merge tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2021-03-21T18:04:20+00:00

Pull x86 fixes from Borislav Petkov:
 "The freshest pile of shiny x86 fixes for 5.12:

   - Add the arch-specific mapping between physical and logical CPUs to
     fix devicetree-node lookups

   - Restore the IRQ2 ignore logic

   - Fix get_nr_restart_syscall() to return the correct restart syscall
     number. Split in a 4-patches set to avoid kABI breakage when
     backporting to dead kernels"

* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/of: Fix CPU devicetree-node lookups
  x86/ioapic: Ignore IRQ2 again
  x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
  x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
  x86: Move TS_COMPAT back to asm/thread_info.h
  kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()

KVM: x86: Protect userspace MSR filter with SRCU, and set atomically-ish

2021-03-18T17:55:14+00:00

Fix a plethora of issues with MSR filtering by installing the resulting
filter as an atomic bundle instead of updating the live filter one range
at a time.  The KVM_X86_SET_MSR_FILTER ioctl() isn't truly atomic, as
the hardware MSR bitmaps won't be updated until the next VM-Enter, but
the relevant software struct is atomically updated, which is what KVM
really needs.

Similar to the approach used for modifying memslots, make arch.msr_filter
a SRCU-protected pointer, do all the work configuring the new filter
outside of kvm->lock, and then acquire kvm->lock only when the new filter
has been vetted and created.  That way vCPU readers either see the old
filter or the new filter in their entirety, not some half-baked state.

Yuan Yao pointed out a use-after-free in ksm_msr_allowed() due to a
TOCTOU bug, but that's just the tip of the iceberg...

  - Nothing is __rcu annotated, making it nigh impossible to audit the
    code for correctness.
  - kvm_add_msr_filter() has an unpaired smp_wmb().  Violation of kernel
    coding style aside, the lack of a smb_rmb() anywhere casts all code
    into doubt.
  - kvm_clear_msr_filter() has a double free TOCTOU bug, as it grabs
    count before taking the lock.
  - kvm_clear_msr_filter() also has memory leak due to the same TOCTOU bug.

The entire approach of updating the live filter is also flawed.  While
installing a new filter is inherently racy if vCPUs are running, fixing
the above issues also makes it trivial to ensure certain behavior is
deterministic, e.g. KVM can provide deterministic behavior for MSRs with
identical settings in the old and new filters.  An atomic update of the
filter also prevents KVM from getting into a half-baked state, e.g. if
installing a filter fails, the existing approach would leave the filter
in a half-baked state, having already committed whatever bits of the
filter were already processed.

[*] https://lkml.kernel.org/r/20210312083157.25403-1-yaoyuan0329os@gmail.com

Fixes: 1a155254ff93 ("KVM: x86: Introduce MSR filtering")
Cc: stable@vger.kernel.org
Cc: Alexander Graf 
Reported-by: Yuan Yao 
Signed-off-by: Sean Christopherson 
Message-Id: <20210316184436.2544875-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini

KVM: x86: hyper-v: Track Hyper-V TSC page status

2021-03-18T12:02:46+00:00

Create an infrastructure for tracking Hyper-V TSC page status, i.e. if it
was updated from guest/host side or if we've failed to set it up (because
e.g. guest wrote some garbage to HV_X64_MSR_REFERENCE_TSC) and there's no
need to retry.

Also, in a hypothetical situation when we are in 'always catchup' mode for
TSC we can now avoid contending 'hv->hv_lock' on every guest enter by
setting the state to HV_TSC_PAGE_BROKEN after compute_tsc_page_parameters()
returns false.

Check for HV_TSC_PAGE_SET state instead of '!hv->tsc_ref.tsc_sequence' in
get_time_ref_counter() to properly handle the situation when we failed to
write the updated TSC page values to the guest.

Signed-off-by: Vitaly Kuznetsov 
Message-Id: <20210316143736.964151-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini

x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART

2021-03-16T21:13:11+00:00

Save the current_thread_info()->status of X86 in the new
restart_block->arch_data field so TS_COMPAT_RESTART can be removed again.

Signed-off-by: Oleg Nesterov 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/r/20210201174716.GA17898@redhat.com