linux.git/arch/x86/include/uapi/asm, branch v4.15

Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-12-30T01:02:49+00:00

Pull x86 page table isolation updates from Thomas Gleixner:
 "This is the final set of enabling page table isolation on x86:

   - Infrastructure patches for handling the extra page tables.

   - Patches which map the various bits and pieces which are required to
     get in and out of user space into the user space visible page
     tables.

   - The required changes to have CR3 switching in the entry/exit code.

   - Optimizations for the CR3 switching along with documentation how
     the ASID/PCID mechanism works.

   - Updates to dump pagetables to cover the user space page tables for
     W+X scans and extra debugfs files to analyze both the kernel and
     the user space visible page tables

  The whole functionality is compile time controlled via a config switch
  and can be turned on/off on the command line as well"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  x86/ldt: Make the LDT mapping RO
  x86/mm/dump_pagetables: Allow dumping current pagetables
  x86/mm/dump_pagetables: Check user space page table for WX pages
  x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy
  x86/mm/pti: Add Kconfig
  x86/dumpstack: Indicate in Oops whether PTI is configured and enabled
  x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming
  x86/mm: Use INVPCID for __native_flush_tlb_single()
  x86/mm: Optimize RESTORE_CR3
  x86/mm: Use/Fix PCID to optimize user/kernel switches
  x86/mm: Abstract switching CR3
  x86/mm: Allow flushing for future ASID switches
  x86/pti: Map the vsyscall page if needed
  x86/pti: Put the LDT in its own PGD if PTI is on
  x86/mm/64: Make a full PGD-entry size hole in the memory map
  x86/events/intel/ds: Map debug buffers in cpu_entry_area
  x86/cpu_entry_area: Add debugstore entries to cpu_entry_area
  x86/mm/pti: Map ESPFIX into user space
  x86/mm/pti: Share entry text PMD
  x86/entry: Align entry text section to PMD boundary
  ...

x86/mm: Use/Fix PCID to optimize user/kernel switches

2017-12-23T20:13:00+00:00

We can use PCID to retain the TLBs across CR3 switches; including those now
part of the user/kernel switch. This increases performance of kernel
entry/exit at the cost of more expensive/complicated TLB flushing.

Now that we have two address spaces, one for kernel and one for user space,
we need two PCIDs per mm. We use the top PCID bit to indicate a user PCID
(just like we use the PFN LSB for the PGD). Since we do TLB invalidation
from kernel space, the existing code will only invalidate the kernel PCID,
we augment that by marking the corresponding user PCID invalid, and upon
switching back to userspace, use a flushing CR3 write for the switch.

In order to access the user_pcid_flush_mask we use PER_CPU storage, which
means the previously established SWAPGS vs CR3 ordering is now mandatory
and required.

Having to do this memory access does require additional registers, most
sites have a functioning stack and we can spill one (RAX), sites without
functional stack need to otherwise provide the second scratch register.

Note: PCID is generally available on Intel Sandybridge and later CPUs.
Note: Up until this point TLB flushing was broken in this series.

Based-on-code-from: Dave Hansen 
Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Thomas Gleixner 
Cc: Andy Lutomirski 
Cc: Boris Ostrovsky 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: David Laight 
Cc: Denys Vlasenko 
Cc: Eduardo Valentin 
Cc: Greg KH 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Juergen Gross 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Will Deacon 
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Signed-off-by: Ingo Molnar

Merge commit 'upstream-x86-entry' into WIP.x86/mm

2017-12-17T11:58:53+00:00

Pull in a minimal set of v4.15 entry code changes, for a base for the MM isolation patches.

Signed-off-by: Ingo Molnar

bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type

2017-12-05T14:02:40+00:00

Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure.  This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs.  Programs
using them, for example, the bpf selftest fail to compile on these
architectures.

For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it.  For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.

To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type.  An asm-generic header file covers the architectures that
export pt_regs today.

The arch-specific enablement for s390 and arm64 follows in separate
commits.

Reported-by: Thomas Richter 
Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner 
Reviewed-and-tested-by: Thomas Richter 
Acked-by: Alexei Starovoitov 
Cc: Arnaldo Carvalho de Melo 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Arnd Bergmann 
Cc: Daniel Borkmann 
Signed-off-by: Daniel Borkmann

x86/cpufeature: Add User-Mode Instruction Prevention definitions

2017-11-08T10:16:21+00:00

User-Mode Instruction Prevention is a security feature present in new
Intel processors that, when set, prevents the execution of a subset of
instructions if such instructions are executed in user mode (CPL > 0).
Attempting to execute such instructions causes a general protection
exception.

The subset of instructions comprises:

 * SGDT - Store Global Descriptor Table
 * SIDT - Store Interrupt Descriptor Table
 * SLDT - Store Local Descriptor Table
 * SMSW - Store Machine Status Word
 * STR  - Store Task Register

This feature is also added to the list of disabled-features to allow
a cleaner handling of build-time configuration.

Signed-off-by: Ricardo Neri 
Reviewed-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Cc: Andrew Morton 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Chen Yucong 
Cc: Chris Metcalf 
Cc: Dave Hansen 
Cc: Denys Vlasenko 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Huang Rui 
Cc: Jiri Slaby 
Cc: Jonathan Corbet 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Masami Hiramatsu 
Cc: Michael S. Tsirkin 
Cc: Paolo Bonzini 
Cc: Paul Gortmaker 
Cc: Peter Zijlstra 
Cc: Ravi V. Shankar 
Cc: Shuah Khan 
Cc: Tony Luck 
Cc: Vlastimil Babka 
Cc: ricardo.neri@intel.com
Link: http://lkml.kernel.org/r/1509935277-22138-7-git-send-email-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Ingo Molnar

x86/boot: Add early boot support when running with SEV active

2017-11-07T14:35:58+00:00

Early in the boot process, add checks to determine if the kernel is
running with Secure Encrypted Virtualization (SEV) active.

Checking for SEV requires checking that the kernel is running under a
hypervisor (CPUID 0x00000001, bit 31), that the SEV feature is available
(CPUID 0x8000001f, bit 1) and then checking a non-interceptable SEV MSR
(0xc0010131, bit 0).

This check is required so that during early compressed kernel booting the
pagetables (both the boot pagetables and KASLR pagetables (if enabled) are
updated to include the encryption mask so that when the kernel is
decompressed into encrypted memory, it can boot properly.

After the kernel is decompressed and continues booting the same logic is
used to check if SEV is active and set a flag indicating so.  This allows
to distinguish between SME and SEV, each of which have unique differences
in how certain things are handled: e.g. DMA (always bounce buffered with
SEV) or EFI tables (always access decrypted with SME).

Signed-off-by: Tom Lendacky 
Signed-off-by: Brijesh Singh 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Tested-by: Borislav Petkov 
Cc: Laura Abbott 
Cc: Kees Cook 
Cc: kvm@vger.kernel.org
Cc: Konrad Rzeszutek Wilk 
Cc: Radim Krčmář 
Cc: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Paolo Bonzini 
Cc: "Kirill A. Shutemov" 
Link: https://lkml.kernel.org/r/20171020143059.3291-13-brijesh.singh@amd.com

Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflicts

2017-11-07T09:53:06+00:00

Conflicts:
	arch/x86/kernel/cpu/Makefile

Signed-off-by: Ingo Molnar

License cleanup: add SPDX license identifier to uapi header files with a license

2017-11-02T10:20:11+00:00

Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX license identifier to uapi header files with no license

2017-11-02T10:19:54+00:00

Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.

By default are files without license information under the default
license of the kernel, which is GPLV2.  Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

otherwise syscall usage would not be possible.

Update the files which contain no license information with an SPDX
license identifier.  The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception.  SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman