There was a mixup when the SGI UV2 hub chip was sent to be
fabricated, and it ended up with the wrong part number in the
HRP_NODE_ID mmr. Future versions of the chip will (may) have the
correct part number. Change the UV infrastructure to recognize
both part numbers as valid IDs of a UV2 hub chip.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/20111129210058.GA20452@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: uv2: Workaround for UV2 Hub bug (system global address format)

This is a workaround for a UV2 hub bug that affects the format of system
global addresses.

The GRU API for UV2 was inadvertently broken by a hardware change.  The
format of the physical address used for TLB dropins and for addresses used
with instructions running in unmapped mode has changed.  This change was
not documented and became apparent only when diags failed running on
system simulators.

For UV1, TLB and GRU instruction physical addresses are identical to
socket physical addresses (although high NASID bits must be OR'ed into the
address).

For UV2, socket physical addresses need to be converted.  The NODE portion
of the physical address needs to be shifted so that the low bit is in bit
39 or bit 40, depending on an MMR value.

It is not yet clear if this bug will be fixed in a silicon respin.  If it
is fixed, the hub revision will be incremented & the workaround disabled.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This covers the trivial cases from open-coded xadd to the xadd macros.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Link: http://lkml.kernel.org/r/4E5BCC40.3030501@goop.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Correct the UV2 broacast assist unit's destination timeout
period. And the activation status register in UV2 should be
tested for a destination timeout with a 4, not a 2.  The values
for Active versus Timeout were reversed.

This patch is critical for TLB shootdown on an Altix UV2 system
(i.e. the follow-on to the current Altix UV).

 Destination timeout period:
  The period is set in 4 bits of memory-mapped register MISC_CONTROL.
  The left bit toggles base period between 10us and 80us.
  The other 3 bits are the multiplier.
 Decimal 15, hex f, gives the maximum: 7 * 80us

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20110621122243.117324443@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Remove the large stack-resident cpumask_t from
reset_with_ipi()'s stack by allocating one per uvhub.

Due to the limited size of the stack the potentially huge cpumask_t may
cause stack overrun.  We haven't seen it happen yet, but we need to make it
a practice not to push such structures onto the stack.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20110621122242.832589130@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Rename 'bau_targ_hubmask' to 'pnmask' for clarity.

The BAU distribution bit mask is indexed by pnode number, not hub or
blade number.  This important fact is not clear while the mask is
called a 'hubmask'.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20110621122242.630995969@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Make all the functions in uv_bau.h inline so that it can
be included in the fake prom (used in simulations).

If not inlined the unused functions will generate compiler warnings.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20110621122242.230529678@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

No code changes. Reformat definitions to make it more readable.

I fixed alignment of comments in the structure definitions.

Also aligned comments and most field definitions & values. Also
sorted the defines for the SHIFT & MASK values for each MMR.
This make the file visually much more acceptable.

Some of the symbol names are still quite long. The file is based
on post-processing of verilog definitions that are used for the
node controller chip design. Although some symbol names are not
what I would chose, I would like to maintain compatibility with
the names used by the chip designers. We have a number of
cross-reference utilities & having common names is important.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/20110527145256.GA31224@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--
 arch/x86/include/asm/uv/uv_mmrs.h | 2873 +++++++++++++++++++++-----------------
 1 file changed, 1600 insertions(+), 1273 deletions(-)

SGI UV's uv_tlb.c driver has become rather hard to read, with overly large
functions, non-standard coding style and (way) too long variable, constant
and function names and non-obvious code flow sequences.

This patch improves the readability and maintainability of the driver
significantly, by doing the following strict code cleanups with no side
effects:

 - Split long functions into shorter logical functions.

 - Shortened some variable and structure member names.

 - Added special functions for reads and writes of MMR regs with
   very long names.

 - Added the 'tunables' table to shortened tunables_write().

 - Added the 'stat_description' table to shorten uv_ptc_proc_write().

 - Pass fewer 'stat' arguments where it can be derived from the 'bcp'
   argument.

 - Function definitions consistent on one line, and inline in few (short) cases.

 - Moved some small structures and an atomic inline function to the header file.

 - Moved some local variables to the blocks where they are used.

 - Updated the copyright date.

 - Shortened uv_write_global_mmr64() etc. using some aliasing; no
   line breaks. Renamed many uv_.. functions that are not exported.

 - Aligned structure fields.
    [ note that not all structures are aligned the same way though; I'd like
      to keep the extensive commenting in some of them. ]

 - Shortened some long structure names.

 - Standard pass/fail exit from init_per_cpu()

 - Vertical alignment for mass initializations.

 - More separation between blocks of code.

Tested on a 16-processor Altix UV.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: penberg@kernel.org
Link: http://lkml.kernel.org/r/E1QOw12-0004MN-Lp@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>