linux.git/arch/x86/include/asm/microcode.h, branch v4.11

Merge branch 'x86/urgent' into x86/microcode, to resolve conflicts

2017-01-31T07:38:17+00:00

 Conflicts:
  arch/x86/kernel/cpu/microcode/amd.c
  arch/x86/kernel/cpu/microcode/core.c

Signed-off-by: Ingo Molnar

x86/microcode: Do not access the initrd after it has been freed

2017-01-30T08:32:42+00:00

When we look for microcode blobs, we first try builtin and if that
doesn't succeed, we fallback to the initrd supplied to the kernel.

However, at some point doing boot, that initrd gets jettisoned and we
shouldn't access it anymore. But we do, as the below KASAN report shows.
That's because find_microcode_in_initrd() doesn't check whether the
initrd is still valid or not.

So do that.

  ==================================================================
  BUG: KASAN: use-after-free in find_cpio_data
  Read of size 1 by task swapper/1/0
  page:ffffea0000db9d40 count:0 mapcount:0 mapping:          (null) index:0x1
  flags: 0x100000000000000()
  raw: 0100000000000000 0000000000000000 0000000000000001 00000000ffffffff
  raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000
  page dumped because: kasan: bad access detected
  CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W       4.10.0-rc5-debug-00075-g2dbde22 #3
  Hardware name: Dell Inc. XPS 13 9360/0839Y6, BIOS 1.2.3 12/01/2016
  Call Trace:
   dump_stack
   ? _atomic_dec_and_lock
   ? __dump_page
   kasan_report_error
   ? pointer
   ? find_cpio_data
   __asan_report_load1_noabort
   ? find_cpio_data
   find_cpio_data
   ? vsprintf
   ? dump_stack
   ? get_ucode_user
   ? print_usage_bug
   find_microcode_in_initrd
   __load_ucode_intel
   ? collect_cpu_info_early
   ? debug_check_no_locks_freed
   load_ucode_intel_ap
   ? collect_cpu_info
   ? trace_hardirqs_on
   ? flat_send_IPI_mask_allbutself
   load_ucode_ap
   ? get_builtin_firmware
   ? flush_tlb_func
   ? do_raw_spin_trylock
   ? cpumask_weight
   cpu_init
   ? trace_hardirqs_off
   ? play_dead_common
   ? native_play_dead
   ? hlt_play_dead
   ? syscall_init
   ? arch_cpu_idle_dead
   ? do_idle
   start_secondary
   start_cpu
  Memory state around the buggy address:
   ffff880036e74f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   ffff880036e74f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  >ffff880036e75000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                     ^
   ffff880036e75080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   ffff880036e75100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  ==================================================================

Reported-by: Andrey Ryabinin 
Tested-by: Andrey Ryabinin 
Signed-off-by: Borislav Petkov 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20170126165833.evjemhbqzaepirxo@pd.tnic
Signed-off-by: Ingo Molnar

x86/microcode: Convert to bare minimum MSR accessors

2017-01-23T09:02:45+00:00

Having tracepoints to the MSR accessors makes them unsuitable for early
microcode loading: think 32-bit before paging is enabled and us chasing
pointers to test whether a tracepoint is enabled or not. Results in a
reliable triple fault.

Convert to the bare ones.

Signed-off-by: Borislav Petkov 
Link: http://lkml.kernel.org/r/20170120202955.4091-4-bp@alien8.de
Signed-off-by: Thomas Gleixner

x86/microcode: Rework microcode loading

2016-10-25T10:28:59+00:00

Yeah, I know, I know, this is a huuge patch and reviewing it is hard.

Sorry but this is the only way I could think of in which I can rewrite
the microcode patches loading procedure without breaking (knowingly) the
driver.

So maybe this patch is easier to review if one looks at the files after
the patch has been applied instead at the diff. Because then it becomes
pretty obvious:

* The BSP-loading path - load_ucode_bsp() is working independently from
  the AP path now and it doesn't save any pointers or patches anymore -
  it solely parses the builtin or initrd microcode and applies the patch.
  That's it.

This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly.

* The AP-loading path - load_ucode_ap() then goes and scans
  builtin/initrd *again* for the microcode patches but it caches them this
  time so that we don't have to do that scan on each AP but only once.

This simplifies the code considerably.

Then, when we save the microcode from the initrd/builtin, we go and
add the relevant patches to our own cache. The AMD side did do that
and now the Intel side does it too. So no more pointer copying and
blabla, we save the microcode patches ourselves and are independent from
initrd/builtin.

This whole conversion gives us other benefits like unifying the
initrd parsing into a single function: find_microcode_in_initrd() is
used by both.

The diffstat speaks for itself: 456 insertions(+), 695 deletions(-)

Signed-off-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/microcode: Export the microcode cache linked list

2016-10-25T10:28:58+00:00

It will be used by both drivers so move it to core.c.

No functionality change.

Signed-off-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20161025095522.11964-6-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/microcode: Remove one #ifdef clause

2016-10-25T10:28:57+00:00

Move the function declaration to the other #ifdef CONFIG_MICROCODE
together with the other functions.

No functionality change.

Signed-off-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20161025095522.11964-5-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/microcode: Fix suspend to RAM with builtin microcode

2016-06-08T09:04:19+00:00

Usually, after we have found the proper microcode blob for the current
machine, we stash it away for later use with save_microcode_in_initrd().

However, with builtin microcode which doesn't come from the initrd, we
don't call that function because CONFIG_BLK_DEV_INITRD=n and even if
set, we don't have a valid initrd.

In order to fix this, let's make save_microcode_in_initrd() an
fs_initcall which runs before rootfs_initcall() as this was the time it
was called previously through:

 rootfs_initcall(populate_rootfs)
 |-> free_initrd()
     |-> free_initrd_mem()
         |-> save_microcode_in_initrd()

Also, we make it run independently from initrd functionality being
present or not.

And since it is called in the microcode loader only now, we can also
make it static.

Reported-and-tested-by: Jim Bos 
Signed-off-by: Borislav Petkov 
Cc:  # v4.6
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1465225850-7352-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/microcode: Fix loading precedence

2016-06-08T09:04:19+00:00

So it can happen that even with builtin microcode,
CONFIG_BLK_DEV_INITRD=y gets forgotten enabled.

Or, even with that disabled, an initrd image gets supplied by the boot
loader, by omission or is simply forgotten there. And since we do look
at boot_params.hdr.ramdisk_* to know whether we have received an initrd,
we might get puzzled.

So let's just make the loader look for builtin microcode first and if
found, ignore the ramdisk image.

If no builtin found, it falls back to scanning the supplied initrd, of
course.

For that, we move all the initrd scanning in a separate
__scan_microcode_initrd() function and fall back to it only if
load_builtin_intel_microcode() has failed.

Reported-and-tested-by: Gabriel Craciunescu 
Signed-off-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1465225850-7352-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/microcode: Untangle from BLK_DEV_INITRD

2016-02-09T10:41:15+00:00

Thomas Voegtle reported that doing oldconfig with a .config which has
CONFIG_MICROCODE enabled but BLK_DEV_INITRD disabled prevents the
microcode loading mechanism from being built.

So untangle it from the BLK_DEV_INITRD dependency so that oldconfig
doesn't turn it off and add an explanatory text to its Kconfig help what
the supported methods for supplying microcode are.

Reported-by: Thomas Voegtle 
Tested-by: Thomas Voegtle 
Signed-off-by: Borislav Petkov 
Cc:  # 4.4
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1454499225-21544-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/cpu: Unify CPU family, model, stepping calculation

2015-11-24T08:15:54+00:00

Add generic functions which calc family, model and stepping from
the CPUID_1.EAX leaf and stick them into the library we have.

Rename those which do call CPUID with the prefix "x86_cpuid" as
suggested by Paolo Bonzini.

No functionality change.

Signed-off-by: Borislav Petkov 
Reviewed-by: Paolo Bonzini 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1448273546-2567-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar