Add ABI prefixes to the frame setup functions that didn't already have
them.  To avoid compiler warnings and prepare for moving these functions
to separate files, make them non-static.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20220606203802.158958-7-brgerst@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>

Push down the call to sigmask_to_save() into the frame setup functions.
Thus, remove the use of compat_sigset_t outside of the compat code.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20220606203802.158958-3-brgerst@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>

Passing the signal number as a separate parameter is unnecessary, since
it is always ksig->sig.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20220606203802.158958-2-brgerst@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>

When a CPU enters an idle state, a non-initialized AMX register state may
be the cause of preventing a deeper low-power state. Other extended
register states whether initialized or not do not impact the CPU idle
state.

The new helper can ensure the AMX state is initialized before the CPU is
idle, and it will be used by the intel idle driver.

Check the AMX_TILE feature bit before using XGETBV1 as a chain of
dependencies was established via cpuid_deps[]: AMX->XFD->XGETBV1.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20220608164748.11864-2-chang.seok.bae@intel.com

Pull kthread updates from Eric Biederman:
 "This updates init and user mode helper tasks to be ordinary user mode
  tasks.

  Commit 40966e316f86 ("kthread: Ensure struct kthread is present for
  all kthreads") caused init and the user mode helper threads that call
  kernel_execve to have struct kthread allocated for them. This struct
  kthread going away during execve in turned made a use after free of
  struct kthread possible.

  Here, commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for
  init and umh") is enough to fix the use after free and is simple
  enough to be backportable.

  The rest of the changes pass struct kernel_clone_args to clean things
  up and cause the code to make sense.

  In making init and the user mode helpers tasks purely user mode tasks
  I ran into two complications. The function task_tick_numa was
  detecting tasks without an mm by testing for the presence of
  PF_KTHREAD. The initramfs code in populate_initrd_image was using
  flush_delayed_fput to ensuere the closing of all it's file descriptors
  was complete, and flush_delayed_fput does not work in a userspace
  thread.

  I have looked and looked and more complications and in my code review
  I have not found any, and neither has anyone else with the code
  sitting in linux-next"

* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sched: Update task_tick_numa to ignore tasks without an mm
  fork: Stop allowing kthreads to call execve
  fork: Explicitly set PF_KTHREAD
  init: Deal with the init process being a user mode process
  fork: Generalize PF_IO_WORKER handling
  fork: Explicity test for idle tasks in copy_thread
  fork: Pass struct kernel_clone_args into copy_thread
  kthread: Don't allocate kthread_struct for init and umh

Remove empty files which were supposed to get removed with the
respective commits removing the functionality in them:

$ find arch/x86/ -empty
arch/x86/lib/mmx_32.c
arch/x86/include/asm/fpu/internal.h
arch/x86/include/asm/mmx.h

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220520101723.12006-1-bp@alien8.de

The functions invoked via do_arch_prctl_common() can only operate on
the current task and none of these function uses the task argument.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/87lev7vtxj.ffs@tglx

Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.

The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.

The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size".  These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().

Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull kvm updates from Paolo Bonzini:
 "RISCV:

   - Use common KVM implementation of MMU memory caches

   - SBI v0.2 support for Guest

   - Initial KVM selftests support

   - Fix to avoid spurious virtual interrupts after clearing hideleg CSR

   - Update email address for Anup and Atish

  ARM:

   - Simplification of the 'vcpu first run' by integrating it into KVM's
     'pid change' flow

   - Refactoring of the FP and SVE state tracking, also leading to a
     simpler state and less shared data between EL1 and EL2 in the nVHE
     case

   - Tidy up the header file usage for the nvhe hyp object

   - New HYP unsharing mechanism, finally allowing pages to be unmapped
     from the Stage-1 EL2 page-tables

   - Various pKVM cleanups around refcounting and sharing

   - A couple of vgic fixes for bugs that would trigger once the vcpu
     xarray rework is merged, but not sooner

   - Add minimal support for ARMv8.7's PMU extension

   - Rework kvm_pgtable initialisation ahead of the NV work

   - New selftest for IRQ injection

   - Teach selftests about the lack of default IPA space and page sizes

   - Expand sysreg selftest to deal with Pointer Authentication

   - The usual bunch of cleanups and doc update

  s390:

   - fix sigp sense/start/stop/inconsistency

   - cleanups

  x86:

   - Clean up some function prototypes more

   - improved gfn_to_pfn_cache with proper invalidation, used by Xen
     emulation

   - add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery

   - completely remove potential TOC/TOU races in nested SVM consistency
     checks

   - update some PMCs on emulated instructions

   - Intel AMX support (joint work between Thomas and Intel)

   - large MMU cleanups

   - module parameter to disable PMU virtualization

   - cleanup register cache

   - first part of halt handling cleanups

   - Hyper-V enlightened MSR bitmap support for nested hypervisors

  Generic:

   - clean up Makefiles

   - introduce CONFIG_HAVE_KVM_DIRTY_RING

   - optimize memslot lookup using a tree

   - optimize vCPU array usage by converting to xarray"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
  x86/fpu: Fix inline prefix warnings
  selftest: kvm: Add amx selftest
  selftest: kvm: Move struct kvm_x86_state to header
  selftest: kvm: Reorder vcpu_load_state steps for AMX
  kvm: x86: Disable interception for IA32_XFD on demand
  x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
  kvm: selftests: Add support for KVM_CAP_XSAVE2
  kvm: x86: Add support for getting/setting expanded xstate buffer
  x86/fpu: Add uabi_size to guest_fpu
  kvm: x86: Add CPUID support for Intel AMX
  kvm: x86: Add XCR0 support for Intel AMX
  kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
  kvm: x86: Emulate IA32_XFD_ERR for guest
  kvm: x86: Intercept #NM for saving IA32_XFD_ERR
  x86/fpu: Prepare xfd_err in struct fpu_guest
  kvm: x86: Add emulation for IA32_XFD
  x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
  kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
  x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
  x86/fpu: Add guest support to xfd_enable_feature()
  ...

Fix sparse warnings in xstate and remove inline prefix.

Fixes: 980fe2fddcff ("x86/fpu: Extend fpu_xstate_prctl() with guest permissions")
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220113180825.322333-1-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>