This closes a hole in our SMAP implementation.

This patch comes from grsecurity. Good catch!

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/314cc9f294e8f14ed85485727556ad4f15bb1659.1502159503.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

We are using the same vector for nested/non-nested posted
interrupts delivery, this may cause interrupts latency in
L1 since we can't kick the L2 vcpu out of vmx-nonroot mode.

This patch introduces a new vector which is only for nested
posted interrupts to solve the problems above.

Signed-off-by: Wincy Van <fanwenyi0529@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull ARM updates from Russell King:

 - add support for ftrace-with-registers, which is needed for kgraft and
   other ftrace tools

 - support for mremap() for the sigpage/vDSO so that checkpoint/restore
   can work

 - add timestamps to each line of the register dump output

 - remove the unused KTHREAD_SIZE from nommu

 - align the ARM bitops APIs with the generic API (using unsigned long
   pointers rather than void pointers)

 - make the configuration of userspace Thumb support an expert option so
   that we can default it on, and avoid some hard to debug userspace
   crashes

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8684/1: NOMMU: Remove unused KTHREAD_SIZE definition
  ARM: 8683/1: ARM32: Support mremap() for sigpage/vDSO
  ARM: 8679/1: bitops: Align prototypes to generic API
  ARM: 8678/1: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS
  ARM: make configuration of userspace Thumb support an expert option
  ARM: 8673/1: Fix __show_regs output timestamps

CRIU restores application mappings on the same place where they
were before Checkpoint. That means, that we need to move vDSO
and sigpage during restore on exactly the same place where
they were before C/R.

Make mremap() code update mm->context.{sigpage,vdso} pointers
during VMA move. Sigpage is used for landing after handling
a signal - if the pointer is not updated during moving, the
application might crash on any signal after mremap().

vDSO pointer on ARM32 is used only for setting auxv at this moment,
update it during mremap() in case of future usage.

Without those updates, current work of CRIU on ARM32 is not reliable.
Historically, we error Checkpointing if we find vDSO page on ARM32
and suggest user to disable CONFIG_VDSO.
But that's not correct - it goes from x86 where signal processing
is ended in vDSO blob. For arm32 it's sigpage, which is not disabled
with `CONFIG_VDSO=n'.

Looks like C/R was working by luck - because userspace on ARM32 at
this moment always sets SA_RESTORER.

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

On x86-64 __VIRTUAL_MASK_SHIFT depends on paging mode now.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170606113133.22974-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Petr Mladek reported the following warning when loading the livepatch
sample module:

  WARNING: CPU: 1 PID: 3699 at arch/x86/kernel/stacktrace.c:132 save_stack_trace_tsk_reliable+0x133/0x1a0
  ...
  Call Trace:
   __schedule+0x273/0x820
   schedule+0x36/0x80
   kthreadd+0x305/0x310
   ? kthread_create_on_cpu+0x80/0x80
   ? icmp_echo.part.32+0x50/0x50
   ret_from_fork+0x2c/0x40

That warning means the end of the stack is no longer recognized as such
for newly forked tasks.  The problem was introduced with the following
commit:

  ff3f7e2475bb ("x86/entry: Fix the end of the stack for newly forked tasks")

... which was completely misguided.  It only partially fixed the
reported issue, and it introduced another bug in the process.  None of
the other entry code saves the frame pointer before calling into C code,
so it doesn't make sense for ret_from_fork to do so either.

Contrary to what I originally thought, the original issue wasn't related
to newly forked tasks.  It was actually related to ftrace.  When entry
code calls into a function which then calls into an ftrace handler, the
stack frame looks different than normal.

The original issue will be fixed in the unwinder, in a subsequent patch.

Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: live-patching@vger.kernel.org
Fixes: ff3f7e2475bb ("x86/entry: Fix the end of the stack for newly forked tasks")
Link: http://lkml.kernel.org/r/f350760f7e82f0750c8d1dd093456eb212751caa.1495553739.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull livepatch updates from Jiri Kosina:

 - a per-task consistency model is being added for architectures that
   support reliable stack dumping (extending this, currently rather
   trivial set, is currently in the works).

   This extends the nature of the types of patches that can be applied
   by live patching infrastructure. The code stems from the design
   proposal made [1] back in November 2014. It's a hybrid of SUSE's
   kGraft and RH's kpatch, combining advantages of both: it uses
   kGraft's per-task consistency and syscall barrier switching combined
   with kpatch's stack trace switching. There are also a number of
   fallback options which make it quite flexible.

   Most of the heavy lifting done by Josh Poimboeuf with help from
   Miroslav Benes and Petr Mladek

   [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz

 - module load time patch optimization from Zhou Chengming

 - a few assorted small fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: add missing printk newlines
  livepatch: Cancel transition a safe way for immediate patches
  livepatch: Reduce the time of finding module symbols
  livepatch: make klp_mutex proper part of API
  livepatch: allow removal of a disabled patch
  livepatch: add /proc/<pid>/patch_state
  livepatch: change to a per-task consistency model
  livepatch: store function sizes
  livepatch: use kstrtobool() in enabled_store()
  livepatch: move patching functions into patch.c
  livepatch: remove unnecessary object loaded check
  livepatch: separate enabled and patched states
  livepatch/s390: add TIF_PATCH_PENDING thread flag
  livepatch/s390: reorganize TIF thread flag bits
  livepatch/powerpc: add TIF_PATCH_PENDING thread flag
  livepatch/x86: add TIF_PATCH_PENDING thread flag
  livepatch: create temporary klp_update_patch_state() stub
  x86/entry: define _TIF_ALLWORK_MASK flags explicitly
  stacktrace/x86: add function for detecting reliable stack traces

Pull fs/compat.c cleanups from Al Viro:
 "More moving of compat syscalls from fs/compat.c to fs/*.c where the
  native counterparts live.

  And death to compat_sys_getdents64() - the only architecture that used
  to need it was ia64, and _that_ has lost biarch support quite a few
  years ago"

* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/compat.c: trim unused includes
  move compat_rw_copy_check_uvector() over to fs/read_write.c
  fhandle: move compat syscalls from compat.c
  open: move compat syscalls from compat.c
  stat: move compat syscalls from compat.c
  fcntl: move compat syscalls from compat.c
  readdir: move compat syscalls from compat.c
  statfs: move compat syscalls from compat.c
  utimes: move compat syscalls from compat.c
  move compat select-related syscalls to fs/select.c
  Remove compat_sys_getdents64()

Pull x86 mm updates from Ingo Molnar:
 "The main x86 MM changes in this cycle were:

   - continued native kernel PCID support preparation patches to the TLB
     flushing code (Andy Lutomirski)

   - various fixes related to 32-bit compat syscall returning address
     over 4Gb in applications, launched from 64-bit binaries - motivated
     by C/R frameworks such as Virtuozzo. (Dmitry Safonov)

   - continued Intel 5-level paging enablement: in particular the
     conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)

   - x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)

   - ... plus misc updates, fixes and cleanups"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
  mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
  x86/mm: Fix flush_tlb_page() on Xen
  x86/mm: Make flush_tlb_mm_range() more predictable
  x86/mm: Remove flush_tlb() and flush_tlb_current_task()
  x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
  x86/mm/64: Fix crash in remove_pagetable()
  Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
  x86/boot/e820: Remove a redundant self assignment
  x86/mm: Fix dump pagetables for 4 levels of page tables
  x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
  x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
  Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
  x86/espfix: Add support for 5-level paging
  x86/kasan: Extend KASAN to support 5-level paging
  x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
  x86/paravirt: Add 5-level support to the paravirt code
  x86/mm: Define virtual memory map for 5-level paging
  x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
  x86/boot: Detect 5-level paging support
  x86/mm/numa: Remove numa_nodemask_from_meminfo()
  ...

Pull x86 vdso updates from Ingo Molnar:
 "Add support for vDSO acceleration of the "Hyper-V TSC page", to speed
  up clock reading on Hyper-V guests"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method
  x86/hyperv: Move TSC reading method to asm/mshyperv.h
  x86/hyperv: Implement hv_get_tsc_page()