The decompressed kernel initially relies on the identity map set up by
the boot/compressed kernel for accessing things like boot_params. With
the recent introduction of SEV-SNP support, the decompressed kernel
also needs to access the setup_data entries pointed to by
boot_params->hdr.setup_data.

This can lead to a crash in the kexec kernel during early boot due to
these entries not currently being included in the initial identity map,
see thread at Link below.

Include mappings for the setup_data entries in the initial identity map.

  [ bp: Massage commit message and use a helper var for better readability. ]

Fixes: b190a043c49a ("x86/sev: Add SEV-SNP feature detection/setup")
Reported-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/TYCPR01MB694815CD815E98945F63C99183B49@TYCPR01MB6948.jpnprd01.prod.outlook.com

Pull more EFI updates from Ard Biesheuvel:
 "Follow-up tweaks for EFI changes - they mostly address issues
  introduced this merge window, except for Heinrich's patch:

   - fix new DXE service invocations for mixed mode

   - use correct Kconfig symbol when setting PE header flag

   - clean up the drivers/firmware/efi Kconfig dependencies so that
     features that depend on CONFIG_EFI are hidden from the UI when the
     symbol is not enabled.

  Also included is a RISC-V bugfix from Heinrich to avoid read-write
  mappings of read-only firmware regions in the EFI page tables"

* tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: clean up Kconfig dependencies on CONFIG_EFI
  efi/x86: libstub: Make DXE calls mixed mode safe
  efi: x86: Fix config name for setting the NX-compatibility flag in the PE header
  riscv: read-only pages should not be writable

Commit 21b68da7bf4a ("efi: x86: Set the NX-compatibility flag in the PE
header") intends to set the compatibility flag, i.e.,
IMAGE_DLL_CHARACTERISTICS_NX_COMPAT, but this ifdef is actually dead as
the CONFIG_DXE_MEM_ATTRIBUTES Kconfig option does not exist.

The config is actually called EFI_DXE_MEM_ATTRIBUTES. Adjust the ifdef
to use the intended config name.

The issue was identified with ./scripts/checkkconfigsymbols.py.

Fixes: 21b68da7bf4a ("efi: x86: Set the NX-compatibility flag in the PE header")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220601115043.7678-1-lukas.bulwahn@gmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Pull Kbuild updates from Masahiro Yamada:

 - Add HOSTPKG_CONFIG env variable to allow users to override pkg-config

 - Support W=e as a shorthand for KCFLAGS=-Werror

 - Fix CONFIG_IKHEADERS build to support toybox cpio

 - Add scripts/dummy-tools/pahole to ease distro packagers' life

 - Suppress false-positive warnings from checksyscalls.sh for W=2 build

 - Factor out the common code of arch/*/boot/install.sh into
   scripts/install.sh

 - Support 'kernel-install' tool in scripts/prune-kernel

 - Refactor module-versioning to link the symbol versions at the final
   link of vmlinux and modules

 - Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
   an arch-agnostic way

 - Refactor modpost, Makefiles

* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
  genksyms: adjust the output format to modpost
  kbuild: stop merging *.symversions
  kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
  modpost: extract symbol versions from *.cmd files
  modpost: add sym_find_with_module() helper
  modpost: change the license of EXPORT_SYMBOL to bool type
  modpost: remove left-over cross_compile declaration
  kbuild: record symbol versions in *.cmd files
  kbuild: generate a list of objects in vmlinux
  modpost: move *.mod.c generation to write_mod_c_files()
  modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
  scripts/prune-kernel: Use kernel-install if available
  kbuild: factor out the common installation code into scripts/install.sh
  modpost: split new_symbol() to symbol allocation and hash table addition
  modpost: make sym_add_exported() always allocate a new symbol
  modpost: make multiple export error
  modpost: dump Module.symvers in the same order of modules.order
  modpost: traverse the namespace_list in order
  modpost: use doubly linked list for dump_lists
  modpost: traverse unresolved symbols in order
  ...

Pull drm updates from Dave Airlie:
 "Intel have enabled DG2 on certain SKUs for laptops, AMD has started
  some new GPU support, msm has user allocated VA controls

  dma-buf:
   - add dma_resv_replace_fences
   - add dma_resv_get_singleton
   - make dma_excl_fence private

  core:
   - EDID parser refactorings
   - switch drivers to drm_mode_copy/duplicate
   - DRM managed mutex initialization

  display-helper:
   - put HDMI, SCDC, HDCP, DSC and DP into new module

  gem:
   - rework fence handling

  ttm:
   - rework bulk move handling
   - add common debugfs for resource managers
   - convert to kvcalloc

  format helpers:
   - support monochrome formats
   - RGB888, RGB565 to XRGB8888 conversions

  fbdev:
   - cfb/sys_imageblit fixes
   - pagelist corruption fix
   - create offb platform device
   - deferred io improvements

  sysfb:
   - Kconfig rework
   - support for VESA mode selection

  bridge:
   - conversions to devm_drm_of_get_bridge
   - conversions to panel_bridge
   - analogix_dp - autosuspend support
   - it66121 - audio support
   - tc358767 - DSI to DPI support
   - icn6211 - PLL/I2C fixes, DT property
   - adv7611 - enable DRM_BRIDGE_OP_HPD
   - anx7625 - fill ELD if no monitor
   - dw_hdmi - add audio support
   - lontium LT9211 support, i.MXMP LDB
   - it6505: Kconfig fix, DPCD set power fix
   - adv7511 - CEC support for ADV7535

  panel:
   - ltk035c5444t, B133UAN01, NV3052C panel support
   - DataImage FG040346DSSWBG04 support
   - st7735r - DT bindings fix
   - ssd130x - fixes

  i915:
   - DG2 laptop PCI-IDs ("motherboard down")
   - Initial RPL-P PCI IDs
   - compute engine ABI
   - DG2 Tile4 support
   - DG2 CCS clear color compression support
   - DG2 render/media compression formats support
   - ATS-M platform info
   - RPL-S PCI IDs added
   - Bump ADL-P DMC version to v2.16
   - Support static DRRS
   - Support multiple eDP/LVDS native mode refresh rates
   - DP HDR support for HSW+
   - Lots of display refactoring + fixes
   - GuC hwconfig support and query
   - sysfs support for multi-tile
   - fdinfo per-client gpu utilisation
   - add geometry subslices query
   - fix prime mmap with LMEM
   - fix vm open count and remove vma refcounts
   - contiguous allocation fixes
   - steered register write support
   - small PCI BAR enablement
   - GuC error capture support
   - sunset igpu legacy mmap support for newer devices
   - GuC version 70.1.1 support

  amdgpu:
   - Initial SoC21 support
   - SMU 13.x enablement
   - SMU 13.0.4 support
   - ttm_eu cleanups
   - USB-C, GPUVM updates
   - TMZ fixes for RV
   - RAS support for VCN
   - PM sysfs code cleanup
   - DC FP rework
   - extend CG/PG flags to 64-bit
   - SI dpm lockdep fix
   - runtime PM fixes

  amdkfd:
   - RAS/SVM fixes
   - TLB flush fixes
   - CRIU GWS support
   - ignore bogus MEC signals more efficiently

  msm:
   - Fourcc modifier for tiled but not compressed layouts
   - Support for userspace allocated IOVA (GPU virtual address)
   - DPU: DSC (Display Stream Compression) support
   - DP: eDP support
   - DP: conversion to use drm_bridge and drm_bridge_connector
   - Merge DPU1 and MDP5 MDSS driver
   - DPU: writeback support

  nouveau:
   - make some structures static
   - make some variables static
   - switch to drm_gem_plane_helper_prepare_fb

  radeon:
   - misc fixes/cleanups

  mxsfb:
   - rework crtc mode setting
   - LCDIF CRC support

  etnaviv:
   - fencing improvements
   - fix address space collisions
   - cleanup MMU reference handling

  gma500:
   - GEM/GTT improvements
   - connector handling fixes

  komeda:
   - switch to plane reset helper

  mediatek:
   - MIPI DSI improvements

  omapdrm:
   - GEM improvements

  qxl:
   - aarch64 support

  vc4:
   - add a CL submission tracepoint
   - HDMI YUV support
   - HDMI/clock improvements
   - drop is_hdmi caching

  virtio:
   - remove restriction of non-zero blob types

  vmwgfx:
   - support for cursormob and cursorbypass 4
   - fence improvements

  tidss:
   - reset DISPC on startup

  solomon:
   - SPI support
   - DT improvements

  sun4i:
   - allwinner D1 support
   - drop is_hdmi caching

  imx:
   - use swap() instead of open-coding
   - use devm_platform_ioremap_resource
   - remove redunant initializations

  ast:
   - Displayport support

  rockchip:
   - Refactor IOMMU initialisation
   - make some structures static
   - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
   - support swapped YUV formats,
   - clock improvements
   - rk3568 support
   - VOP2 support

  mediatek:
   - MT8186 support

  tegra:
   - debugabillity improvements"

* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
  drm/i915/dsi: fix VBT send packet port selection for ICL+
  drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
  drm/i915/reg: fix undefined behavior due to shift overflowing the constant
  drm/i915/gt: Fix use of static in macro mismatch
  drm/i915/audio: fix audio code enable/disable pipe logging
  drm/i915: Fix CFI violation with show_dynamic_id()
  drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
  drm/i915/gt: Fix build error without CONFIG_PM
  drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
  drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
  drm/msm: don't free the IRQ if it was not requested
  drm/msm/dpu: limit writeback modes according to max_linewidth
  drm/amd: Don't reset dGPUs if the system is going to s2idle
  drm/amdgpu: Unmap legacy queue when MES is enabled
  drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
  drm/msm: Fix fb plane offset calculation
  drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
  drm/msm/dsi: don't powerup at modeset time for parade-ps8640
  drm/rockchip: Change register space names in vop2
  dt-bindings: display: rockchip: make reg-names mandatory for VOP2
  ...

Pull x86 build updates from Borislav Petkov:

 - Add a "make x86_debug.config" target which enables a bunch of useful
   config debug options when trying to debug an issue

 - A gcc-12 build warnings fix

* tag 'x86_build_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Wrap literal addresses in absolute_pointer()
  x86/configs: Add x86 debugging Kconfig fragment plus docs

Pull Intel TDX support from Borislav Petkov:
 "Intel Trust Domain Extensions (TDX) support.

  This is the Intel version of a confidential computing solution called
  Trust Domain Extensions (TDX). This series adds support to run the
  kernel as part of a TDX guest. It provides similar guest protections
  to AMD's SEV-SNP like guest memory and register state encryption,
  memory integrity protection and a lot more.

  Design-wise, it differs from AMD's solution considerably: it uses a
  software module which runs in a special CPU mode called (Secure
  Arbitration Mode) SEAM. As the name suggests, this module serves as
  sort of an arbiter which the confidential guest calls for services it
  needs during its lifetime.

  Just like AMD's SNP set, this series reworks and streamlines certain
  parts of x86 arch code so that this feature can be properly
  accomodated"

* tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  x86/tdx: Fix RETs in TDX asm
  x86/tdx: Annotate a noreturn function
  x86/mm: Fix spacing within memory encryption features message
  x86/kaslr: Fix build warning in KASLR code in boot stub
  Documentation/x86: Document TDX kernel architecture
  ACPICA: Avoid cache flush inside virtual machines
  x86/tdx/ioapic: Add shared bit for IOAPIC base address
  x86/mm: Make DMA memory shared for TD guest
  x86/mm/cpa: Add support for TDX shared memory
  x86/tdx: Make pages shared in ioremap()
  x86/topology: Disable CPU online/offline control for TDX guests
  x86/boot: Avoid #VE during boot for TDX platforms
  x86/boot: Set CR0.NE early and keep it set during the boot
  x86/acpi/x86/boot: Add multiprocessor wake-up support
  x86/boot: Add a trampoline for booting APs via firmware handoff
  x86/tdx: Wire up KVM hypercalls
  x86/tdx: Port I/O: Add early boot support
  x86/tdx: Port I/O: Add runtime hypercalls
  x86/boot: Port I/O: Add decompression-time support for TDX
  x86/boot: Port I/O: Allow to hook up alternative helpers
  ...

Pull AMD SEV-SNP support from Borislav Petkov:
 "The third AMD confidential computing feature called Secure Nested
  Paging.

  Add to confidential guests the necessary memory integrity protection
  against malicious hypervisor-based attacks like data replay, memory
  remapping and others, thus achieving a stronger isolation from the
  hypervisor.

  At the core of the functionality is a new structure called a reverse
  map table (RMP) with which the guest has a say in which pages get
  assigned to it and gets notified when a page which it owns, gets
  accessed/modified under the covers so that the guest can take an
  appropriate action.

  In addition, add support for the whole machinery needed to launch a
  SNP guest, details of which is properly explained in each patch.

  And last but not least, the series refactors and improves parts of the
  previous SEV support so that the new code is accomodated properly and
  not just bolted on"

* tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  x86/entry: Fixup objtool/ibt validation
  x86/sev: Mark the code returning to user space as syscall gap
  x86/sev: Annotate stack change in the #VC handler
  x86/sev: Remove duplicated assignment to variable info
  x86/sev: Fix address space sparse warning
  x86/sev: Get the AP jump table address from secrets page
  x86/sev: Add missing __init annotations to SEV init routines
  virt: sevguest: Rename the sevguest dir and files to sev-guest
  virt: sevguest: Change driver name to reflect generic SEV support
  x86/boot: Put globals that are accessed early into the .data section
  x86/boot: Add an efi.h header for the decompressor
  virt: sevguest: Fix bool function returning negative value
  virt: sevguest: Fix return value check in alloc_shared_pages()
  x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate()
  virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement
  virt: sevguest: Add support to get extended report
  virt: sevguest: Add support to derive key
  virt: Add SEV-SNP guest driver
  x86/sev: Register SEV-SNP guest request platform device
  x86/sev: Provide support for SNP guest request NAEs
  ...

GCC 11 (incorrectly[1]) assumes that literal values cast to (void *)
should be treated like a NULL pointer with an offset, and raises
diagnostics when doing bounds checking under -Warray-bounds. GCC 12
got "smarter" about finding these:

  In function 'rdfs8',
      inlined from 'vga_recalc_vertical' at /srv/code/arch/x86/boot/video-mode.c:124:29,
      inlined from 'set_mode' at /srv/code/arch/x86/boot/video-mode.c:163:3:
  /srv/code/arch/x86/boot/boot.h:114:9: warning: array subscript 0 is outside array bounds of 'u8[0]' {aka 'unsigned char[]'} [-Warray-bounds]
    114 |         asm volatile("movb %%fs:%1,%0" : "=q" (v) : "m" (*(u8 *)addr));
        |         ^~~

This has been solved in other places[2] already by using the recently
added absolute_pointer() macro. Do the same here.

  [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
  [2] https://lore.kernel.org/all/20210912160149.2227137-1-linux@roeck-us.net/

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220227195918.705219-1-keescook@chromium.org

Many architectures have similar install.sh scripts.

The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.

The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.

Factor out the generic part into scripts/install.sh.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>