linux.git/arch/um/kernel, branch v5.1

treewide: add checks for the return value of memblock_alloc*()

2019-03-12T17:04:02+00:00

Add check for the return value of memblock_alloc*() functions and call
panic() in case of error.  The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.

The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.

  @@
  expression ptr, size, align;
  @@
  ptr = memblock_alloc(size, align);
  + if (!ptr)
  + 	panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);

[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
  Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
  Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
  Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport 
Signed-off-by: Anders Roxell 
Reviewed-by: Guo Ren 		[c-sky]
Acked-by: Paul Burton 		[MIPS]
Acked-by: Heiko Carstens 	[s390]
Reviewed-by: Juergen Gross 		[Xen]
Reviewed-by: Geert Uytterhoeven 	[m68k]
Acked-by: Max Filippov 		[xtensa]
Cc: Catalin Marinas 
Cc: Christophe Leroy 
Cc: Christoph Hellwig 
Cc: "David S. Miller" 
Cc: Dennis Zhou 
Cc: Greentime Hu 
Cc: Greg Kroah-Hartman 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Mark Salter 
Cc: Matt Turner 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Petr Mladek 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Rob Herring 
Cc: Rob Herring 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'akpm' (patches from Andrew)

2019-01-05T17:16:18+00:00

Merge more updates from Andrew Morton:

 - procfs updates

 - various misc bits

 - lib/ updates

 - epoll updates

 - autofs

 - fatfs

 - a few more MM bits

* emailed patches from Andrew Morton : (58 commits)
  mm/page_io.c: fix polled swap page in
  checkpatch: add Co-developed-by to signature tags
  docs: fix Co-Developed-by docs
  drivers/base/platform.c: kmemleak ignore a known leak
  fs: don't open code lru_to_page()
  fs/: remove caller signal_pending branch predictions
  mm/: remove caller signal_pending branch predictions
  arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
  kernel/sched/: remove caller signal_pending branch predictions
  kernel/locking/mutex.c: remove caller signal_pending branch predictions
  mm: select HAVE_MOVE_PMD on x86 for faster mremap
  mm: speed up mremap by 20x on large regions
  mm: treewide: remove unused address argument from pte_alloc functions
  initramfs: cleanup incomplete rootfs
  scripts/gdb: fix lx-version string output
  kernel/kcov.c: mark write_comp_data() as notrace
  kernel/sysctl: add panic_print into sysctl
  panic: add options to print system info when panic happens
  bfs: extra sanity checking and static inode bitmap
  exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
  ...

mm: treewide: remove unused address argument from pte_alloc functions

2019-01-04T21:13:47+00:00

Patch series "Add support for fast mremap".

This series speeds up the mremap(2) syscall by copying page tables at
the PMD level even for non-THP systems.  There is concern that the extra
'address' argument that mremap passes to pte_alloc may do something
subtle architecture related in the future that may make the scheme not
work.  Also we find that there is no point in passing the 'address' to
pte_alloc since its unused.  This patch therefore removes this argument
tree-wide resulting in a nice negative diff as well.  Also ensuring
along the way that the enabled architectures do not do anything funky
with the 'address' argument that goes unnoticed by the optimization.

Build and boot tested on x86-64.  Build tested on arm64.  The config
enablement patch for arm64 will be posted in the future after more
testing.

The changes were obtained by applying the following Coccinelle script.
(thanks Julia for answering all Coccinelle questions!).
Following fix ups were done manually:
* Removal of address argument from  pte_fragment_alloc
* Removal of pte_alloc_one_fast definitions from m68k and microblaze.

// Options: --include-headers --no-includes
// Note: I split the 'identifier fn' line, so if you are manually
// running it, please unsplit it so it runs for you.

virtual patch

@pte_alloc_func_def depends on patch exists@
identifier E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
type T2;
@@

 fn(...
- , T2 E2
 )
 { ... }

@pte_alloc_func_proto_noarg depends on patch exists@
type T1, T2, T3, T4;
identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

(
- T3 fn(T1, T2);
+ T3 fn(T1);
|
- T3 fn(T1, T2, T4);
+ T3 fn(T1, T2);
)

@pte_alloc_func_proto depends on patch exists@
identifier E1, E2, E4;
type T1, T2, T3, T4;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

(
- T3 fn(T1 E1, T2 E2);
+ T3 fn(T1 E1);
|
- T3 fn(T1 E1, T2 E2, T4 E4);
+ T3 fn(T1 E1, T2 E2);
)

@pte_alloc_func_call depends on patch exists@
expression E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

 fn(...
-,  E2
 )

@pte_alloc_macro depends on patch exists@
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
identifier a, b, c;
expression e;
position p;
@@

(
- #define fn(a, b, c) e
+ #define fn(a, b) e
|
- #define fn(a, b) e
+ #define fn(a) e
)

Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com
Signed-off-by: Joel Fernandes (Google) 
Suggested-by: Kirill A. Shutemov 
Acked-by: Kirill A. Shutemov 
Cc: Michal Hocko 
Cc: Julia Lawall 
Cc: Kirill A. Shutemov 
Cc: William Kucharski 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Remove 'type' argument from access_ok() function

2019-01-04T02:57:57+00:00

Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds

Merge branch 'for-linus-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml

2019-01-03T02:39:22+00:00

Pull UML updates from Richard Weinberger:

 - DISCARD support for our block device driver

 - Many TLB flush optimizations

 - Various smaller fixes

 - And most important, Anton agreed to help me maintaining UML

* 'for-linus-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Remove obsolete reenable_XX calls
  um: writev needs 
  Add Anton Ivanov to UML maintainers
  um: remove redundant generic-y
  um: Optimize Flush TLB for force/fork case
  um: Avoid marking pages with "changed protection"
  um: Skip TLB flushing where not needed
  um: Optimize TLB operations v2
  um: Remove unnecessary faulted check in uaccess.c
  um: Add support for DISCARD in the UBD Driver
  um: Remove unsafe printks from the io thread
  um: Clean-up command processing in UML UBD driver
  um: Switch to block-mq constants in the UML UBD driver
  um: Make GCOV depend on !KCOV
  um: Include sys/uio.h to have writev()
  um: Add HAVE_DEBUG_BUGVERBOSE
  um: Update maintainers file entry

mm: convert totalram_pages and totalhigh_pages variables to atomic

2018-12-28T20:11:47+00:00

totalram_pages and totalhigh_pages are made static inline function.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS 
Suggested-by: Michal Hocko 
Suggested-by: Vlastimil Babka 
Reviewed-by: Konstantin Khlebnikov 
Reviewed-by: Pavel Tatashin 
Acked-by: Michal Hocko 
Acked-by: Vlastimil Babka 
Cc: David Hildenbrand 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: reference totalram_pages and managed_pages once per function

2018-12-28T20:11:47+00:00

Patch series "mm: convert totalram_pages, totalhigh_pages and managed
pages to atomic", v5.

This series converts totalram_pages, totalhigh_pages and
zone->managed_pages to atomic variables.

totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 It seemes better
to remove the lock and convert variables to atomic.  With the change,
preventing poteintial store-to-read tearing comes as a bonus.

This patch (of 4):

This is in preparation to a later patch which converts totalram_pages and
zone->managed_pages to atomic variables.  Please note that re-reading the
value might lead to a different value and as such it could lead to
unexpected behavior.  There are no known bugs as a result of the current
code but it is better to prevent from them in principle.

Link: http://lkml.kernel.org/r/1542090790-21750-2-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS 
Reviewed-by: Konstantin Khlebnikov 
Reviewed-by: David Hildenbrand 
Acked-by: Michal Hocko 
Acked-by: Vlastimil Babka 
Reviewed-by: Pavel Tatashin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

um: Remove obsolete reenable_XX calls

2018-12-27T21:48:35+00:00

reenable_fd has been a NOP since the introduction of the EPOLL
based interrupt controller.
reenable_channel() is no longer needed as the flow control is
now handled via the write IRQs on the channel.

Signed-off-by: Anton Ivanov 
Signed-off-by: Richard Weinberger

um: Optimize Flush TLB for force/fork case

2018-12-27T21:48:34+00:00

When UML handles a fork the page tables need to be brought up
to date. That was done using brute force - full tlb flush.

This is actually unnecessary, because the mapped-in mappings are
all correct and the only mappings which need to be updated
after a flush are any unmaps (so that paging works) as well as
any pending protection changes.

This optimization squeezes out up to 3% from a full kernel rebuild
time under memory pressure.

Signed-off-by: Anton Ivanov 
Signed-off-by: Richard Weinberger

um: Skip TLB flushing where not needed

2018-12-27T21:48:34+00:00

Skip TLB flushing for all cases where it is not needed, not
just flush_tlb_mm_range

Signed-off-by: Anton Ivanov 
Signed-off-by: Richard Weinberger