Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.

The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.

Note that only cris and tile have more directories than only asm:
 - arch-v[10|32] for cris;
 - arch for tile.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull timer updates from Thomas Gleixner:
 "The timer departement delivers:

   - more year 2038 rework

   - a massive rework of the arm achitected timer

   - preparatory patches to allow NTP correction of clock event devices
     to avoid early expiry

   - the usual pile of fixes and enhancements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits)
  timer/sysclt: Restrict timer migration sysctl values to 0 and 1
  arm64/arch_timer: Mark errata handlers as __maybe_unused
  Clocksource/mips-gic: Remove redundant non devicetree init
  MIPS/Malta: Probe gic-timer via devicetree
  clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
  acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
  clocksource: arm_arch_timer: add GTDT support for memory-mapped timer
  acpi/arm64: Add memory-mapped timer support in GTDT driver
  clocksource: arm_arch_timer: simplify ACPI support code.
  acpi/arm64: Add GTDT table parse driver
  clocksource: arm_arch_timer: split MMIO timer probing.
  clocksource: arm_arch_timer: add structs to describe MMIO timer
  clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call
  clocksource: arm_arch_timer: refactor arch_timer_needs_probing
  clocksource: arm_arch_timer: split dt-only rate handling
  x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks
  unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks
  um/time: Set ->min_delta_ticks and ->max_delta_ticks
  tile/time: Set ->min_delta_ticks and ->max_delta_ticks
  score/time: Set ->min_delta_ticks and ->max_delta_ticks
  ...

Pull uaccess unification updates from Al Viro:
 "This is the uaccess unification pile. It's _not_ the end of uaccess
  work, but the next batch of that will go into the next cycle. This one
  mostly takes copy_from_user() and friends out of arch/* and gets the
  zero-padding behaviour in sync for all architectures.

  Dealing with the nocache/writethrough mess is for the next cycle;
  fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am
  sold on access_ok() in there, BTW; just not in this pile), same for
  reducing __copy_... callsites, strn*... stuff, etc. - there will be a
  pile about as large as this one in the next merge window.

  This one sat in -next for weeks. -3KLoC"

* 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits)
  HAVE_ARCH_HARDENED_USERCOPY is unconditional now
  CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
  m32r: switch to RAW_COPY_USER
  hexagon: switch to RAW_COPY_USER
  microblaze: switch to RAW_COPY_USER
  get rid of padding, switch to RAW_COPY_USER
  ia64: get rid of copy_in_user()
  ia64: sanitize __access_ok()
  ia64: get rid of 'segment' argument of __do_{get,put}_user()
  ia64: get rid of 'segment' argument of __{get,put}_user_check()
  ia64: add extable.h
  powerpc: get rid of zeroing, switch to RAW_COPY_USER
  esas2r: don't open-code memdup_user()
  alpha: fix stack smashing in old_adjtimex(2)
  don't open-code kernel_setsockopt()
  mips: switch to RAW_COPY_USER
  mips: get rid of tail-zeroing in primitives
  mips: make copy_from_user() zero tail explicitly
  mips: clean and reorder the forest of macros...
  mips: consolidate __invoke_... wrappers
  ...

Pull EDAC updates from Borislav Petkov:

 - an EDAC driver for Cavium ThunderX RAS IP (Sergey Temerkhanov)

 - removal of DRAM error reporting through PCI SERR NMI (Borislav
   Petkov)

 - misc small fixes (Jan Glauber, Thor Thayer)

* tag 'edac_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, ghes: Do not enable it by default
  EDAC: Rename report status accessors
  EDAC: Delete edac_stub.c
  EDAC: Update Kconfig help text
  EDAC: Remove EDAC_MM_EDAC
  EDAC: Issue tracepoint only when it is defined
  ACPI/extlog: Add EDAC dependency
  EDAC: Move edac_op_state to edac_mc.c
  EDAC: Remove edac_err_assert
  EDAC: Get rid of edac_handlers
  x86/nmi, EDAC: Get rid of DRAM error reporting thru PCI SERR NMI
  EDAC, highbank: Align Makefile directives
  EDAC, thunderx: Remove unused code
  EDAC, thunderx: Change LMC index calculation
  EDAC, altera: Fix peripheral warnings for Cyclone5
  EDAC, thunderx: Fix L2C MCI interrupt disable
  EDAC, thunderx: Add Cavium ThunderX EDAC driver

all architectures converted

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

In preparation for making the clockevents core NTP correction aware,
all clockevent device drivers must set ->min_delta_ticks and
->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a
clockevent device's rate is going to change dynamically and thus, the
ratio of ns to ticks ceases to stay invariant.

Currently, the tile's timer clockevent device is initialized as follows:

  evt->max_delta_ns = clockevent_delta2ns(MAX_TICK, evt);

and

  .min_delta_ns = 1000,

The first one translates to a ->max_delta_ticks value of MAX_TICK.
For the latter, note that the clockevent core will superimpose a
minimum of 1us by itself -- setting ->min_delta_ticks to 1 is safe here.

Initialize ->min_delta_ticks and ->max_delta_ticks with these values.

This patch alone doesn't introduce any change in functionality as the
clockevents core still looks exclusively at the (untouched) ->min_delta_ns
and ->max_delta_ns. As soon as this has changed, a followup patch will
purge the initialization of ->min_delta_ns and ->max_delta_ns from this
driver.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>

Move all the EDAC core functionality behind CONFIG_EDAC and get rid of
that indirection. Update defconfigs which had it.

While at it, fix dependencies such that EDAC depends on RAS for the
tracepoints.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-edac@vger.kernel.org