linux.git/arch/tile/mm, branch v3.7

readahead: fault retry breaks mmap file read random detection

2012-10-09T07:22:47+00:00

.fault now can retry.  The retry can break state machine of .fault.  In
filemap_fault, if page is miss, ra->mmap_miss is increased.  In the second
try, since the page is in page cache now, ra->mmap_miss is decreased.  And
these are done in one fault, so we can't detect random mmap file access.

Add a new flag to indicate .fault is tried once.  In the second try, skip
ra->mmap_miss decreasing.  The filemap_fault state machine is ok with it.

I only tested x86, didn't test other archs, but looks the change for other
archs is obvious, but who knows :)

Signed-off-by: Shaohua Li 
Cc: Rik van Riel 
Cc: Wu Fengguang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: use mm->exe_file instead of first VM_EXECUTABLE vma->vm_file

2012-10-09T07:22:18+00:00

Some security modules and oprofile still uses VM_EXECUTABLE for retrieving
a task's executable file.  After this patch they will use mm->exe_file
directly.  mm->exe_file is protected with mm->mmap_sem, so locking stays
the same.

Signed-off-by: Konstantin Khlebnikov 
Acked-by: Chris Metcalf 			[arch/tile]
Acked-by: Tetsuo Handa 	[tomoyo]
Cc: Alexander Viro 
Cc: Carsten Otte 
Cc: Cyrill Gorcunov 
Cc: Eric Paris 
Cc: H. Peter Anvin 
Cc: Hugh Dickins 
Cc: Ingo Molnar 
Acked-by: James Morris 
Cc: Jason Baron 
Cc: Kentaro Takeda 
Cc: Matt Helsley 
Cc: Nick Piggin 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Robert Richter 
Cc: Suresh Siddha 
Cc: Venkatesh Pallipadi 
Acked-by: Linus Torvalds 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'kmap_atomic' of git://github.com/congwang/linux

2012-07-27T18:26:48+00:00

Pull final kmap_atomic cleanups from Cong Wang:
 "This should be the final round of cleanup, as the definitions of enum
  km_type finally get removed from the whole tree.  The patches have
  been in linux-next for a long time."

* 'kmap_atomic' of git://github.com/congwang/linux:
  pipe: remove KM_USER0 from comments
  vmalloc: remove KM_USER0 from comments
  feature-removal-schedule.txt: remove kmap_atomic(page, km_type)
  tile: remove km_type definitions
  um: remove km_type definitions
  asm-generic: remove km_type definitions
  avr32: remove km_type definitions
  frv: remove km_type definitions
  powerpc: remove km_type definitions
  arm: remove km_type definitions
  highmem: remove the deprecated form of kmap_atomic
  tile: remove usage of enum km_type
  frv: remove the second parameter of kmap_atomic_primary()
  jbd2: remove the second argument of kmap_atomic

tile: remove usage of enum km_type

2012-07-23T06:11:23+00:00

Acked-by: Chris Metcalf 
Signed-off-by: Cong Wang

arch/tile: enable ZONE_DMA for tilegx

2012-07-18T20:40:11+00:00

This is required for PCI root complex legacy support and USB OHCI root
complex support.  With this change tilegx now supports allocating memory
whose PA fits in 32 bits.

Signed-off-by: Chris Metcalf

tilegx pci: support I/O to arbitrarily-cached pages

2012-07-18T20:40:05+00:00

The tilegx PCI root complex support (currently only in linux-next)
is limited to pages that are homed on cached in the default manner,
i.e. "hash-for-home".  This change supports delivery of I/O data to
pages that are cached in other ways (locally on a particular core,
uncached, user-managed incoherent, etc.).

A large part of the change is supporting flushing pages from cache
on particular homes so that we can transition the data that we are
delivering to or from the device appropriately.  The new homecache_finv*
routines handle this.

Some changes to page_table_range_init() were also required to make
the fixmap code work correctly on tilegx; it hadn't been used there
before.

We also remove some stub mark_caches_evicted_*() routines that
were just no-ops anyway.

Signed-off-by: Chris Metcalf

arch/tile: tilegx PCI root complex support

2012-07-18T20:39:11+00:00

This change implements PCIe root complex support for tilegx using
the kernel support layer for accessing the TRIO hardware shim.

Reviewed-by: Bjorn Helgaas  [changes in 07487f3]
Signed-off-by: Chris Metcalf

tile/mm/fault.c: Port OOM changes to handle_page_fault

2012-05-25T16:48:29+00:00

Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99
(mm: retry page fault when blocking on disk transfer) and
commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb
(x86,mm: make pagefault killable)

The above commits introduced changes into the x86 pagefault handler
for making the page fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial
during OOM killer invocation.

Port these changes to tile.

Signed-off-by: Kautuk Consul 
[cmetcalf@tilera.com: initialize "flags" after "write" updated.]
Signed-off-by: Chris Metcalf

arch/tile: support multiple huge page sizes dynamically

2012-05-25T16:48:27+00:00

This change adds support for a new "super" bit in the PTE, using the new
arch_make_huge_pte() method.  The Tilera hypervisor sees the bit set at a
given level of the page table and gangs together 4, 16, or 64 consecutive
pages from that level of the hierarchy to create a larger TLB entry.

One extra "super" page size can be specified at each of the three levels
of the page table hierarchy on tilegx, using the "hugepagesz" argument
on the boot command line.  A new hypervisor API is added to allow Linux
to tell the hypervisor how many PTEs to gang together at each level of
the page table.

To allow pre-allocating huge pages larger than the buddy allocator can
handle, this change modifies the Tilera bootmem support to put all of
memory on tilegx platforms into bootmem.

As part of this change I eliminate the vestigial CONFIG_HIGHPTE support,
which never worked anyway, and eliminate the hv_page_size() API in favor
of the standard vma_kernel_pagesize() API.

Signed-off-by: Chris Metcalf

arch/tile: Allow tilegx to build with either 16K or 64K page size

2012-05-25T16:48:24+00:00

This change introduces new flags for the hv_install_context()
API that passes a page table pointer to the hypervisor.  Clients
can explicitly request 4K, 16K, or 64K small pages when they
install a new context.  In practice, the page size is fixed at
kernel compile time and the same size is always requested every
time a new page table is installed.

The  header changes so that it provides more abstract
macros for managing "page" things like PFNs and page tables.  For
example there is now a HV_DEFAULT_PAGE_SIZE_SMALL instead of the old
HV_PAGE_SIZE_SMALL.  The various PFN routines have been eliminated and
only PA- or PTFN-based ones remain (since PTFNs are always expressed
in fixed 2KB "page" size).  The page-table management macros are
renamed with a leading underscore and take page-size arguments with
the presumption that clients will use those macros in some single
place to provide the "real" macros they will use themselves.

I happened to notice the old hv_set_caching() API was totally broken
(it assumed 4KB pages) so I changed it so it would nominally work
correctly with other page sizes.

Tag modules with the page size so you can't load a module built with
a conflicting page size.  (And add a test for SMP while we're at it.)

Signed-off-by: Chris Metcalf