No point in having this bit defined by architecture.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130917183629.090698799@linutronix.de

This change enables unaligned userspace memory access via a kernel
fast path on tilegx.  The kernel tracks user PC/instruction pairs
per-thread using a direct-mapped cache in userspace.  The cache
maps those PC/instruction pairs to JIT'ed instruction sequences that
load or store using byte-wide load store intructions and then
synthesize 2-, 4- or 8-byte load or store results.  Once an
instruction has been seen to generate an unaligned access once,
subsequent hits on that instruction typically require overhead
of only around 50 cycles if cache and TLB is hot.

We support the prctl() PR_GET_UNALIGN / PR_SET_UNALIGN sys call to
enable or disable unaligned fixups on a per-process basis.

To do this we pull some of the tilepro unaligned support out of the
single_step.c file; tilepro uses instruction disassembly for both
single-step and unaligned access support.  Since tilegx actually has
hardware singlestep support, though, it's cleaner to keep the tilegx
unaligned access code in a separate file.  While we're at it,
properly rename the tilepro-specific types, etc., to have tilepro
suffixes instead of generic tile suffixes.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

Pull tile arch changes from Chris Metcalf:
 "These are some minor new feature work and other changes that didn't
  merit getting pushed up after the 3.9 merge window closed.

  There should be a lot more activity in the 3.11 merge window"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: Fix syscall return value passed to tracepoint
  tile: comment assumption about __insn_mtspr for <asm/irqflags.h>
  tile: ns2cycles should use __raw_get_cpu_var
  arch: remove KCORE_ELF again [tile]
  tile: remove two outdated Kconfig entries
  tile: support atomic64_dec_if_positive()
  tile: support TIF_SYSCALL_TRACEPOINT; select HAVE_SYSCALL_TRACEPOINTS
  tile: Add definition of NR_syscalls
  tile: move declaration of sys_call_table to <asm/syscall.h>
  arch/tile: Enable HAVE_ARCH_TRACEHOOK
  arch/tile: Call tracehook_report_syscall_{entry,exit} in syscall trace

Move it to a common place. Preparatory patch for implementing
set/clear for the idle need_resched poll implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20130321215233.446034505@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This patch adds support for the TIF_SYSCALL_TRACEPOINT on the tile
architecture. Basically, it calls the appropriate tracepoints on syscall
entry and exit.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

This routine isn't used unless CONFIG_HOMECACHE is enabled, which
isn't even available as a public configuration option yet.
Since it no longer links correctly in 3.4, just remove it for now.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

helpers parallel to set_restore_sigmask(), used in the next commits

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull smp hotplug cleanups from Thomas Gleixner:
 "This series is merily a cleanup of code copied around in arch/* and
  not changing any of the real cpu hotplug horrors yet.  I wish I'd had
  something more substantial for 3.5, but I underestimated the lurking
  horror..."

Fix up trivial conflicts in arch/{arm,sparc,x86}/Kconfig and
arch/sparc/include/asm/thread_info_32.h

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
  um: Remove leftover declaration of alloc_task_struct_node()
  task_allocator: Use config switches instead of magic defines
  sparc: Use common threadinfo allocator
  score: Use common threadinfo allocator
  sh-use-common-threadinfo-allocator
  mn10300: Use common threadinfo allocator
  powerpc: Use common threadinfo allocator
  mips: Use common threadinfo allocator
  hexagon: Use common threadinfo allocator
  m32r: Use common threadinfo allocator
  frv: Use common threadinfo allocator
  cris: Use common threadinfo allocator
  x86: Use common threadinfo allocator
  c6x: Use common threadinfo allocator
  fork: Provide kmemcache based thread_info allocator
  tile: Use common threadinfo allocator
  fork: Provide weak arch_release_[task_struct|thread_info] functions
  fork: Move thread info gfp flags to header
  fork: Remove the weak insanity
  sh: Remove cpu_idle_wait()
  ...

First, we were at risk of handling thread-info flags, in particular
do_signal(), when returning from kernel space.  This could happen
after a failed kernel_execve(), or when forking a kernel thread.
The fix is to test in do_work_pending() for user_mode() and return
immediately if so; we already had this test for one of the flags,
so I just hoisted it to the top of the function.

Second, if a ptraced process updated the callee-saved registers
in the ptregs struct and then processed another thread-info flag, we
would overwrite the modifications with the original callee-saved
registers.  To fix this, we add a register to note if we've already
saved the registers once, and skip doing it on additional passes
through the loop.  To avoid a performance hit from the couple of
extra instructions involved, I modified the GET_THREAD_INFO() macro
to be guaranteed to be one instruction, then bundled it with adjacent
instructions, yielding an overall net savings.

Reported-By: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>