linux.git/arch/sparc/kernel/process_64.c, branch v3.17

sparc64: Fix pcr_ops initialization and usage bugs.

2014-08-12T03:45:12+00:00

Christopher reports that perf_event_print_debug() can crash in uniprocessor
builds.  The crash is due to pcr_ops being NULL.

This happens because pcr_arch_init() is only invoked by smp_cpus_done() which
only executes in SMP builds.

init_hw_perf_events() is closely intertwined with pcr_ops being setup properly,
therefore:

1) Call pcr_arch_init() early on from init_hw_perf_events(), instead of
   from smp_cpus_done().

2) Do not hook up a PMU type if pcr_ops is NULL after pcr_arch_init().

3) Move init_hw_perf_events to a later initcall so that it we will be
   sure to invoke pcr_arch_init() after all cpus are brought up.

Finally, guard the one naked sequence of pcr_ops dereferences in
__global_pmu_self() with an appropriate NULL check.

Reported-by: Christopher Alexander Tobias Schulze 
Signed-off-by: David S. Miller

nmi: provide the option to issue an NMI back trace to every cpu but current

2014-06-23T23:47:44+00:00

Sometimes it is preferred not to use the trigger_all_cpu_backtrace()
routine when one wants to avoid capturing a back trace for current.  For
instance if one was previously captured recently.

This patch provides a new routine namely
trigger_allbutself_cpu_backtrace() which offers the flexibility to issue
an NMI to every cpu but current and capture a back trace accordingly.

Patch x86 and sparc to support new routine.

[dzickus@redhat.com: add stub in #else clause]
[dzickus@redhat.com: don't print message in single processor case, wrap with get/put_cpu based on Oleg's suggestion]
[sfr@canb.auug.org.au: undo C99ism]
Signed-off-by: Aaron Tomlin 
Signed-off-by: Don Zickus 
Acked-by: David S. Miller 
Cc: Mateusz Guzik 
Cc: Oleg Nesterov 
Signed-off-by: Stephen Rothwell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

sparc64: fix sparse warning in process_64.c

2014-05-19T02:01:30+00:00

Fix following warning:
process_64.c:91:25: warning: non-ANSI function declaration of function 'arch_cpu_idle_dead'

Add proper (void) to function definition

Signed-off-by: Sam Ravnborg 
Signed-off-by: David S. Miller

sparc64: Make sure %pil interrupts are enabled during hypervisor yield.

2014-03-24T18:45:12+00:00

In arch_cpu_idle() we must enable %pil based interrupts before
potentially invoking the hypervisor cpu yield call.

As per the Hypervisor API documentation for cpu_yield:

	Interrupts which are blocked by some mechanism other that
	pstate.ie (for example %pil) are not guaranteed to cause
	a return from this service.

It seems that only first generation Niagara chips are hit by this
bug.  My best guess is that later chips implement this in hardware
and wake up anyways from %pil events, whereas in first generation
chips the yield is implemented completely in hypervisor code and
requires %pil to be enabled in order to wake properly from this
call.

Fixes: 87fa05aeb3a5 ("sparc: Use generic idle loop")
Reported-by: Fabio M. Di Nitto 
Reported-by: Jan Engelhardt 
Tested-by: Jan Engelhardt 
Signed-off-by: David S. Miller

sparc64: Implement HAVE_CONTEXT_TRACKING

2013-11-14T22:57:21+00:00

Mark the places when the system are in user or are in kernel.
This is used to make full dynticks system (tickless) --
CONFIG_NO_HZ_FULL dependence.

Signed-off-by: Kirill Tkhai 
CC: David Miller 
Signed-off-by: David S. Miller

sparc/sysrq: fix inconstistent help message of sysrq key

2013-05-01T00:04:10+00:00

Currently help message of /proc/sysrq-trigger highlight its
upper-case characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch fix spare sysrq key: "global-regs(y)"

Signed-off-by: zhangwei(Jovi) 
Acked-by: David S. Miller 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dump_stack: unify debug information printed by show_regs()

2013-05-01T00:04:02+00:00

show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms.  This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.

show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.

* Archs which didn't print debug info now do.

  alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
  metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
  um, xtensa

* Already prints debug info.  Replaced with show_regs_print_info().
  The printed information is superset of what used to be there.

  arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86

* s390 is special in that it used to print arch-specific information
  along with generic debug info.  Heiko and Martin think that the
  arch-specific extra isn't worth keeping s390 specfic implementation.
  Converted to use the generic version.

Note that now all archs print the debug info before actual register
dumps.

An example BUG() dump follows.

 kernel BUG at /work/os/work/kernel/workqueue.c:4841!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
 Hardware name: empty empty/S3992, BIOS 080011  10/26/2007
 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
 RIP: 0010:[]  [] init_workqueues+0x4/0x6
 RSP: 0000:ffff88007c861ec8  EFLAGS: 00010246
 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
 RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
  0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
  ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
 Call Trace:
  [] do_one_initcall+0x122/0x170
  [] kernel_init_freeable+0x9b/0x1c8
  [] ? rest_init+0x140/0x140
  [] kernel_init+0xe/0xf0
  [] ret_from_fork+0x7c/0xb0
  [] ? rest_init+0x140/0x140
  ...

v2: Typo fix in x86-32.

v3: CPU number dropped from show_regs_print_info() as
    dump_stack_print_info() has been updated to print it.  s390
    specific implementation dropped as requested by s390 maintainers.

Signed-off-by: Tejun Heo 
Acked-by: David S. Miller 
Acked-by: Jesper Nilsson 
Cc: Heiko Carstens 
Cc: Martin Schwidefsky 
Cc: Bjorn Helgaas 
Cc: Fengguang Wu 
Cc: Mike Frysinger 
Cc: Vineet Gupta 
Cc: Sam Ravnborg 
Acked-by: Chris Metcalf 		[tile bits]
Acked-by: Richard Kuo 		[hexagon bits]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

sparc: Use generic idle loop

2013-04-13T19:36:27+00:00

Add generic cpu_idle support

sparc32:
- replace call to cpu_idle() with cpu_startup_entry()
- add arch_cpu_idle()

sparc64:
- smp_callin() now include cpu_startup_entry() call so we can
  skip calling cpu_idle from assembler
- add arch_cpu_idle() and arch_cpu_idle_dead()

Signed-off-by: Sam Ravnborg 
Reviewed-by: "Srivatsa S. Bhat" 
Cc: torvalds@linux-foundation.org
Cc: rusty@rustcorp.com.au
Cc: paulmck@linux.vnet.ibm.com
Cc: peterz@infradead.org
Cc: magnus.damm@gmail.com
Acked-by: David Miller 
Link: http://lkml.kernel.org/r/20130411193850.GA2330@merkur.ravnborg.org
Signed-off-by: Thomas Gleixner

flagday: kill pt_regs argument of do_fork()

2012-11-29T05:01:08+00:00

Signed-off-by: Al Viro

flagday: don't pass regs to copy_thread()

2012-11-29T04:43:42+00:00

Signed-off-by: Al Viro