linux.git/arch/sh, branch v5.1

Merge tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2019-04-23T20:34:17+00:00

Pull syscall numbering updates from Arnd Bergmann:
 "arch: add pidfd and io_uring syscalls everywhere

  This comes a bit late, but should be in 5.1 anyway: we want the newly
  added system calls to be synchronized across all architectures in the
  release.

  I hope that in the future, any newly added system calls can be added
  to all architectures at the same time, and tested there while they are
  in linux-next, avoiding dependencies between the architecture
  maintainer trees and the tree that contains the new system call"

* tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: add pidfd and io_uring syscalls everywhere

arch: add pidfd and io_uring syscalls everywhere

2019-04-15T14:31:17+00:00

Add the io_uring and pidfd_send_signal system calls to all architectures.

These system calls are designed to handle both native and compat tasks,
so all entries are the same across architectures, only arm-compat and
the generic tale still use an old format.

Acked-by: Michael Ellerman  (powerpc)
Acked-by: Heiko Carstens  (s390)
Acked-by: Geert Uytterhoeven 
Signed-off-by: Arnd Bergmann

Merge branch 'akpm' (patches from Andrew)

2019-04-06T03:08:55+00:00

Merge misc fixes from Andrew Morton:
 "14 fixes"

* emailed patches from Andrew Morton :
  kernel/sysctl.c: fix out-of-bounds access when setting file-max
  mm/util.c: fix strndup_user() comment
  sh: fix multiple function definition build errors
  MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM
  MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM
  mm: writeback: use exact memcg dirty counts
  psi: clarify the units used in pressure files
  mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()
  hugetlbfs: fix memory leak for resv_map
  mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX()
  lib/lzo: fix bugs for very short or empty input
  include/linux/bitrev.h: fix constant bitrev
  kmemleak: powerpc: skip scanning holes in the .bss section
  lib/string.c: implement a basic bcmp

sh: fix multiple function definition build errors

2019-04-06T02:02:31+00:00

Many of the sh CPU-types have their own plat_irq_setup() and
arch_init_clk_ops() functions, so these same (empty) functions in
arch/sh/boards/of-generic.c are not needed and cause build errors.

If there is some case where these empty functions are needed, they can
be retained by marking them as "__weak" while at the same time making
builds that do not need them succeed.

Fixes these build errors:

arch/sh/boards/of-generic.o: In function `plat_irq_setup':
(.init.text+0x134): multiple definition of `plat_irq_setup'
arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here
arch/sh/boards/of-generic.o: In function `arch_init_clk_ops':
(.init.text+0x118): multiple definition of `arch_init_clk_ops'
arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here

Link: http://lkml.kernel.org/r/9ee4e0c5-f100-86a2-bd4d-1d3287ceab31@infradead.org
Signed-off-by: Randy Dunlap 
Reported-by: kbuild test robot 
Cc: Takashi Iwai 
Cc: Yoshinori Sato 
Cc: Rich Felker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

syscalls: Remove start and number from syscall_set_arguments() args

2019-04-05T13:27:23+00:00

After removing the start and count arguments of syscall_get_arguments() it
seems reasonable to remove them from syscall_set_arguments(). Note, as of
today, there are no users of syscall_set_arguments(). But we are told that
there will be soon. But for now, at least make it consistent with
syscall_get_arguments().

Link: http://lkml.kernel.org/r/20190327222014.GA32540@altlinux.org

Cc: Oleg Nesterov 
Cc: Kees Cook 
Cc: Andy Lutomirski 
Cc: Dominik Brodowski 
Cc: Dave Martin 
Cc: "Dmitry V. Levin" 
Cc: x86@kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-arch@vger.kernel.org
Acked-by: Max Filippov  # For xtensa changes
Acked-by: Will Deacon  # For the arm64 bits
Reviewed-by: Thomas Gleixner  # for x86
Reviewed-by: Dmitry V. Levin 
Signed-off-by: Steven Rostedt (VMware)

syscalls: Remove start and number from syscall_get_arguments() args

2019-04-05T13:26:43+00:00

At Linux Plumbers, Andy Lutomirski approached me and pointed out that the
function call syscall_get_arguments() implemented in x86 was horribly
written and not optimized for the standard case of passing in 0 and 6 for
the starting index and the number of system calls to get. When looking at
all the users of this function, I discovered that all instances pass in only
0 and 6 for these arguments. Instead of having this function handle
different cases that are never used, simply rewrite it to return the first 6
arguments of a system call.

This should help out the performance of tracing system calls by ptrace,
ftrace and perf.

Link: http://lkml.kernel.org/r/20161107213233.754809394@goodmis.org

Cc: Oleg Nesterov 
Cc: Kees Cook 
Cc: Andy Lutomirski 
Cc: Dominik Brodowski 
Cc: Dave Martin 
Cc: "Dmitry V. Levin" 
Cc: x86@kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-arch@vger.kernel.org
Acked-by: Paul Burton  # MIPS parts
Acked-by: Max Filippov  # For xtensa changes
Acked-by: Will Deacon  # For the arm64 bits
Reviewed-by: Thomas Gleixner  # for x86
Reviewed-by: Dmitry V. Levin 
Reported-by: Andy Lutomirski 
Signed-off-by: Steven Rostedt (VMware)

KVM: export and iif KVM is supported

2019-03-28T16:27:42+00:00

I do not see any consistency about headers_install of 
and .

According to my analysis of Linux 5.1-rc1, there are 3 groups:

 [1] Both  and  are exported

    alpha, arm, hexagon, mips, powerpc, s390, sparc, x86

 [2]  is exported, but  is not

    arc, arm64, c6x, h8300, ia64, m68k, microblaze, nios2, openrisc,
    parisc, sh, unicore32, xtensa

 [3] Neither  nor  is exported

    csky, nds32, riscv

This does not match to the actual KVM support. At least, [2] is
half-baked.

Nor do arch maintainers look like they care about this. For example,
commit 0add53713b1c ("microblaze: Add missing kvm_para.h to Kbuild")
exported  to user-space in order to fix an in-kernel
build error.

We have two ways to make this consistent:

 [A] export both  and  for all
     architectures, irrespective of the KVM support

 [B] Match the header export of  and 
     to the KVM support

My first attempt was [A] because the code looks cleaner, but Paolo
suggested [B].

So, this commit goes with [B].

For most architectures,  was moved to the kernel-space.
I changed include/uapi/linux/Kbuild so that it checks generated
asm/kvm_para.h as well as check-in ones.

After this commit, there will be two groups:

 [1] Both  and  are exported

    arm, arm64, mips, powerpc, s390, x86

 [2] Neither  nor  is exported

    alpha, arc, c6x, csky, h8300, hexagon, ia64, m68k, microblaze,
    nds32, nios2, openrisc, parisc, riscv, sh, sparc, unicore32, xtensa

Signed-off-by: Masahiro Yamada 
Acked-by: Cornelia Huck 
Signed-off-by: Paolo Bonzini

kbuild: force all architectures except um to include mandatory-y

2019-03-17T03:56:32+00:00

Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.

um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.

Signed-off-by: Masahiro Yamada

memblock: drop memblock_alloc_*_nopanic() variants

2019-03-12T17:04:02+00:00

As all the memblock allocation functions return NULL in case of error
rather than panic(), the duplicates with _nopanic suffix can be removed.

Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport 
Acked-by: Greg Kroah-Hartman 
Reviewed-by: Petr Mladek 		[printk]
Cc: Catalin Marinas 
Cc: Christophe Leroy 
Cc: Christoph Hellwig 
Cc: "David S. Miller" 
Cc: Dennis Zhou 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Guo Ren 				[c-sky]
Cc: Heiko Carstens 
Cc: Juergen Gross 			[Xen]
Cc: Mark Salter 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Paul Burton 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Rob Herring 
Cc: Rob Herring 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

treewide: add checks for the return value of memblock_alloc*()

2019-03-12T17:04:02+00:00

Add check for the return value of memblock_alloc*() functions and call
panic() in case of error.  The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.

The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.

  @@
  expression ptr, size, align;
  @@
  ptr = memblock_alloc(size, align);
  + if (!ptr)
  + 	panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);

[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
  Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
  Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
  Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport 
Signed-off-by: Anders Roxell 
Reviewed-by: Guo Ren 		[c-sky]
Acked-by: Paul Burton 		[MIPS]
Acked-by: Heiko Carstens 	[s390]
Reviewed-by: Juergen Gross 		[Xen]
Reviewed-by: Geert Uytterhoeven 	[m68k]
Acked-by: Max Filippov 		[xtensa]
Cc: Catalin Marinas 
Cc: Christophe Leroy 
Cc: Christoph Hellwig 
Cc: "David S. Miller" 
Cc: Dennis Zhou 
Cc: Greentime Hu 
Cc: Greg Kroah-Hartman 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Mark Salter 
Cc: Matt Turner 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Petr Mladek 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Rob Herring 
Cc: Rob Herring 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds