linux.git/arch/sh, branch v3.18-rc2 Linux kernel source tree Merge git://git.infradead.org/users/eparis/audit 2014-10-19T23:25:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-19T23:25:56+00:00 ab074ade9c33b3585da86d62e87bcb3e897a3f54 Pull audit updates from Eric Paris: "So this change across a whole bunch of arches really solves one basic problem. We want to audit when seccomp is killing a process. seccomp hooks in before the audit syscall entry code. audit_syscall_entry took as an argument the arch of the given syscall. Since the arch is part of what makes a syscall number meaningful it's an important part of the record, but it isn't available when seccomp shoots the syscall... For most arch's we have a better way to get the arch (syscall_get_arch) So the solution was two fold: Implement syscall_get_arch() everywhere there is audit which didn't have it. Use syscall_get_arch() in the seccomp audit code. Having syscall_get_arch() everywhere meant it was a useless flag on the stack and we could get rid of it for the typical syscall entry. The other changes inside the audit system aren't grand, fixed some records that had invalid spaces. Better locking around the task comm field. Removing some dead functions and structs. Make some things static. Really minor stuff" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: rename audit_log_remove_rule to disambiguate for trees audit: cull redundancy in audit_rule_change audit: WARN if audit_rule_change called illegally audit: put rule existence check in canonical order next: openrisc: Fix build audit: get comm using lock to avoid race in string printing audit: remove open_arg() function that is never used audit: correct AUDIT_GET_FEATURE return message type audit: set nlmsg_len for multicast messages. audit: use union for audit_field values since they are mutually exclusive audit: invalid op= values for rules audit: use atomic_t to simplify audit_serial() kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0] audit: reduce scope of audit_log_fcaps audit: reduce scope of audit_net_id audit: arm64: Remove the audit arch argument to audit_syscall_entry arm64: audit: Add audit hook in syscall_trace_enter/exit() audit: x86: drop arch from __audit_syscall_entry() interface sparc: implement is_32bit_task sparc: properly conditionalize use of TIF_32BIT ... 
Pull audit updates from Eric Paris:
 "So this change across a whole bunch of arches really solves one basic
  problem.  We want to audit when seccomp is killing a process.  seccomp
  hooks in before the audit syscall entry code.  audit_syscall_entry
  took as an argument the arch of the given syscall.  Since the arch is
  part of what makes a syscall number meaningful it's an important part
  of the record, but it isn't available when seccomp shoots the
  syscall...

  For most arch's we have a better way to get the arch (syscall_get_arch)
  So the solution was two fold: Implement syscall_get_arch() everywhere
  there is audit which didn't have it.  Use syscall_get_arch() in the
  seccomp audit code.  Having syscall_get_arch() everywhere meant it was
  a useless flag on the stack and we could get rid of it for the typical
  syscall entry.

  The other changes inside the audit system aren't grand, fixed some
  records that had invalid spaces.  Better locking around the task comm
  field.  Removing some dead functions and structs.  Make some things
  static.  Really minor stuff"

* git://git.infradead.org/users/eparis/audit: (31 commits)
  audit: rename audit_log_remove_rule to disambiguate for trees
  audit: cull redundancy in audit_rule_change
  audit: WARN if audit_rule_change called illegally
  audit: put rule existence check in canonical order
  next: openrisc: Fix build
  audit: get comm using lock to avoid race in string printing
  audit: remove open_arg() function that is never used
  audit: correct AUDIT_GET_FEATURE return message type
  audit: set nlmsg_len for multicast messages.
  audit: use union for audit_field values since they are mutually exclusive
  audit: invalid op= values for rules
  audit: use atomic_t to simplify audit_serial()
  kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0]
  audit: reduce scope of audit_log_fcaps
  audit: reduce scope of audit_net_id
  audit: arm64: Remove the audit arch argument to audit_syscall_entry
  arm64: audit: Add audit hook in syscall_trace_enter/exit()
  audit: x86: drop arch from __audit_syscall_entry() interface
  sparc: implement is_32bit_task
  sparc: properly conditionalize use of TIF_32BIT
  ...
Merge branch 'locking-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2014-10-13T13:48:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-13T13:48:00+00:00 dbb885fecc1b1b35e93416bedd24d21bd20f60ed Pull arch atomic cleanups from Ingo Molnar: "This is a series kept separate from the main locking tree, which cleans up and improves various details in the atomics type handling: - Remove the unused atomic_or_long() method - Consolidate and compress atomic ops implementations between architectures, to reduce linecount and to make it easier to add new ops. - Rewrite generic atomic support to only require cmpxchg() from an architecture - generate all other methods from that" * 'locking-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) locking,arch: Use ACCESS_ONCE() instead of cast to volatile in atomic_read() locking, mips: Fix atomics locking, sparc64: Fix atomics locking,arch: Rewrite generic atomic support locking,arch,xtensa: Fold atomic_ops locking,arch,sparc: Fold atomic_ops locking,arch,sh: Fold atomic_ops locking,arch,powerpc: Fold atomic_ops locking,arch,parisc: Fold atomic_ops locking,arch,mn10300: Fold atomic_ops locking,arch,mips: Fold atomic_ops locking,arch,metag: Fold atomic_ops locking,arch,m68k: Fold atomic_ops locking,arch,m32r: Fold atomic_ops locking,arch,ia64: Fold atomic_ops locking,arch,hexagon: Fold atomic_ops locking,arch,cris: Fold atomic_ops locking,arch,avr32: Fold atomic_ops locking,arch,arm64: Fold atomic_ops locking,arch,arm: Fold atomic_ops ... 
Pull arch atomic cleanups from Ingo Molnar:
 "This is a series kept separate from the main locking tree, which
  cleans up and improves various details in the atomics type handling:

   - Remove the unused atomic_or_long() method

   - Consolidate and compress atomic ops implementations between
     architectures, to reduce linecount and to make it easier to add new
     ops.

   - Rewrite generic atomic support to only require cmpxchg() from an
     architecture - generate all other methods from that"

* 'locking-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  locking,arch: Use ACCESS_ONCE() instead of cast to volatile in atomic_read()
  locking, mips: Fix atomics
  locking, sparc64: Fix atomics
  locking,arch: Rewrite generic atomic support
  locking,arch,xtensa: Fold atomic_ops
  locking,arch,sparc: Fold atomic_ops
  locking,arch,sh: Fold atomic_ops
  locking,arch,powerpc: Fold atomic_ops
  locking,arch,parisc: Fold atomic_ops
  locking,arch,mn10300: Fold atomic_ops
  locking,arch,mips: Fold atomic_ops
  locking,arch,metag: Fold atomic_ops
  locking,arch,m68k: Fold atomic_ops
  locking,arch,m32r: Fold atomic_ops
  locking,arch,ia64: Fold atomic_ops
  locking,arch,hexagon: Fold atomic_ops
  locking,arch,cris: Fold atomic_ops
  locking,arch,avr32: Fold atomic_ops
  locking,arch,arm64: Fold atomic_ops
  locking,arch,arm: Fold atomic_ops
  ...
Merge branch 'akpm' (fixes from Andrew Morton) 2014-10-10T02:26:14+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-10T02:26:14+00:00 0cf744bc7ae8e0072159a901f6e1a159bbc30ffa Merge patch-bomb from Andrew Morton: - part of OCFS2 (review is laggy again) - procfs - slab - all of MM - zram, zbud - various other random things: arch, filesystems. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits) nosave: consolidate __nosave_{begin,end} in <asm/sections.h> include/linux/screen_info.h: remove unused ORIG_* macros kernel/sys.c: compat sysinfo syscall: fix undefined behavior kernel/sys.c: whitespace fixes acct: eliminate compile warning kernel/async.c: switch to pr_foo() include/linux/blkdev.h: use NULL instead of zero include/linux/kernel.h: deduplicate code implementing clamp* macros include/linux/kernel.h: rewrite min3, max3 and clamp using min and max alpha: use Kbuild logic to include <asm-generic/sections.h> frv: remove deprecated IRQF_DISABLED frv: remove unused cpuinfo_frv and friends to fix future build error zbud: avoid accessing last unused freelist zsmalloc: simplify init_zspage free obj linking mm/zsmalloc.c: correct comment for fullness group computation zram: use notify_free to account all free notifications zram: report maximum used memory zram: zram memory size limitation zsmalloc: change return value unit of zs_get_total_size_bytes zsmalloc: move pages_allocated to zs_pool ... 
Merge patch-bomb from Andrew Morton:
 - part of OCFS2 (review is laggy again)
 - procfs
 - slab
 - all of MM
 - zram, zbud
 - various other random things: arch, filesystems.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
  nosave: consolidate __nosave_{begin,end} in <asm/sections.h>
  include/linux/screen_info.h: remove unused ORIG_* macros
  kernel/sys.c: compat sysinfo syscall: fix undefined behavior
  kernel/sys.c: whitespace fixes
  acct: eliminate compile warning
  kernel/async.c: switch to pr_foo()
  include/linux/blkdev.h: use NULL instead of zero
  include/linux/kernel.h: deduplicate code implementing clamp* macros
  include/linux/kernel.h: rewrite min3, max3 and clamp using min and max
  alpha: use Kbuild logic to include <asm-generic/sections.h>
  frv: remove deprecated IRQF_DISABLED
  frv: remove unused cpuinfo_frv and friends to fix future build error
  zbud: avoid accessing last unused freelist
  zsmalloc: simplify init_zspage free obj linking
  mm/zsmalloc.c: correct comment for fullness group computation
  zram: use notify_free to account all free notifications
  zram: report maximum used memory
  zram: zram memory size limitation
  zsmalloc: change return value unit of zs_get_total_size_bytes
  zsmalloc: move pages_allocated to zs_pool
  ...
nosave: consolidate __nosave_{begin,end} in <asm/sections.h> 2014-10-10T02:26:04+00:00 Geert Uytterhoeven geert@linux-m68k.org 2014-10-09T22:30:30+00:00 7f8998c7aef3ac9c5f3f2943e083dfa6302e90d0 The different architectures used their own (and different) declarations: extern __visible const void __nosave_begin, __nosave_end; extern const void __nosave_begin, __nosave_end; extern long __nosave_begin, __nosave_end; Consolidate them using the first variant in <asm/sections.h>. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
The different architectures used their own (and different) declarations:

    extern __visible const void __nosave_begin, __nosave_end;
    extern const void __nosave_begin, __nosave_end;
    extern long __nosave_begin, __nosave_end;

Consolidate them using the first variant in <asm/sections.h>.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio 2014-10-09T18:58:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-09T18:58:15+00:00 ea584595fc85e65796335033dfca25ed655cd0ed Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ... 
Pull GPIO changes from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.18 development cycle:

   - Increase the default ARCH_NR_GPIO from 256 to 512.  This was done
     to avoid having a custom <asm/gpio.h> header for the x86
     architecture - GPIO is custom and complicated enough as it is
     already! We want to move to a radix to store the descriptors going
     forward, and finally get rid of this fixed array size altogether.

   - Endgame patching of the gpio_remove() semantics initiated by
     Abdoulaye Berthe.  It is not accepted by the system that the
     removal of a GPIO chip fails during eg reboot or shutdown, and
     therefore the return value has now painfully been refactored away.
     For special cases like GPIO expanders on a hot-pluggable bus like
     USB, we may later add some gpiochip_try_remove() call, but for the
     cases we have now, return values are moot.

   - Some incremental refactoring of the gpiolib core and ACPI GPIO
     library for more descriptor usage.

   - Refactor the chained IRQ handler set-up method to handle also
     threaded, nested interrupts and set up the parent IRQ correctly.
     Switch STMPE and TC3589x drivers to use this registration method.

   - Add a .irq_not_threaded flag to the struct gpio_chip, so that also
     GPIO expanders that block but are still not using threaded IRQ
     handlers.

   - New drivers for the ARM64 X-Gene SoC GPIO controller.

   - The syscon GPIO driver has been improved to handle the "DSP GPIO"
     found on the TI Keystone 2 SoC:s.

   - ADNP driver switched to use gpiolib irqchip helpers.

   - Refactor the DWAPB driver to support being instantiated from and
     MFD cell (platform device).

   - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP,
     Xilinx and Crystalcove drivers.

   - Various minor fixes"

* tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits)
  gpio: pch: Build context save/restore only for PM
  pinctrl: abx500: get rid of unused variable
  gpio: ks8695: fix 'else should follow close brace '}''
  gpio: stmpe: add verbose debug code
  gpio: stmpe: fix up interrupt enable logic
  gpio: staticize xway_stp_init()
  gpio: handle also nested irqchips in the chained handler set-up
  gpio: set parent irq on chained handlers
  gpiolib: irqchip: use irq_find_mapping while removing irqchip
  gpio: crystalcove: support virtual GPIO
  pinctrl: bcm281xx: make Kconfig dependency more strict
  gpio: kona: enable only on BCM_MOBILE or for compile testing
  gpio, bcm-kona, LLVMLinux: Remove use of __initconst
  gpio: Fix ngpio in gpio-xilinx driver
  gpio: dwapb: fix pointer to integer cast
  gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard
  gpio: xgene: Remove unneeded forward declation for struct xgene_gpio
  gpio: xgene: Fix missing spin_lock_init()
  gpio: ks8695: fix switch case indentation
  gpiolib: add irq_not_threaded flag to gpio_chip
  ...
Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2014-10-09T10:30:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-09T10:30:57+00:00 afa3536be88b435a057cb727b48fd3d760a497d2 Pull timer fixes from Ingo Molnar: "Main changes: - Fix the deadlock reported by Dave Jones et al - Clean up and fix nohz_full interaction with arch abilities - nohz init code consolidation/cleanup" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: nohz full depends on irq work self IPI support nohz: Consolidate nohz full init code arm64: Tell irq work about self IPI support arm: Tell irq work about self IPI support x86: Tell irq work about self IPI support irq_work: Force raised irq work to run on irq work interrupt irq_work: Introduce arch_irq_work_has_interrupt() nohz: Move nohz full init call to tick init 
Pull timer fixes from Ingo Molnar:
 "Main changes:

  - Fix the deadlock reported by Dave Jones et al
  - Clean up and fix nohz_full interaction with arch abilities
  - nohz init code consolidation/cleanup"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz: nohz full depends on irq work self IPI support
  nohz: Consolidate nohz full init code
  arm64: Tell irq work about self IPI support
  arm: Tell irq work about self IPI support
  x86: Tell irq work about self IPI support
  irq_work: Force raised irq work to run on irq work interrupt
  irq_work: Introduce arch_irq_work_has_interrupt()
  nohz: Move nohz full init call to tick init
Merge tag 'tty-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2014-10-08T10:52:11+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-08T10:52:11+00:00 683a52a10148e929fb4844f9237f059a47c0b01b Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver patchset for 3.18-rc1. Lots of little things in here, some good work from Peter Hurley on the tty core, and in lots of drivers. There are also lots of other driver updates in here as well, full details in the changelogs. All have been in the linux-next tree for a while" * tag 'tty-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (99 commits) Revert "serial/core: Initialize the console pm state" tty: serial: 8250: use 32bit variable for rpm_tx_active tty: serial: msm: Add earlycon support serial/core: Initialize the console pm state serial: asc: Conditionally use readl_relaxed (COMPILE_TEST) serial: of-serial: add PM suspend/resume support m68k: AMIGA_BUILTIN_SERIAL should depend on TTY asm/uapi: Add definition of TIOC[SG]RS485 tty/metag_da: Add console_poll module parameter serial: 8250_pci: remove rts_n override from Baytrail quirk serial: cadence: Add generic earlycon support serial: imx: change the wait even to interruptiable serial: imx: terminate the RX DMA when the UART is suspending serial: imx: fix throttle/unthrottle callbacks for hardware assisted flow control serial: 8250: Add Quark X1000 to 8250_pci.c tty: omap-serial: pull out calculation from baud_is_mode16 tty: omap-serial: fix division by zero xen_hvc: no reason to write the type key on xenstore tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() ... 
Pull tty/serial driver updates from Greg KH:
 "Here's the big tty/serial driver patchset for 3.18-rc1.

  Lots of little things in here, some good work from Peter Hurley on the
  tty core, and in lots of drivers.  There are also lots of other driver
  updates in here as well, full details in the changelogs.

  All have been in the linux-next tree for a while"

* tag 'tty-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (99 commits)
  Revert "serial/core: Initialize the console pm state"
  tty: serial: 8250: use 32bit variable for rpm_tx_active
  tty: serial: msm: Add earlycon support
  serial/core: Initialize the console pm state
  serial: asc: Conditionally use readl_relaxed (COMPILE_TEST)
  serial: of-serial: add PM suspend/resume support
  m68k: AMIGA_BUILTIN_SERIAL should depend on TTY
  asm/uapi: Add definition of TIOC[SG]RS485
  tty/metag_da: Add console_poll module parameter
  serial: 8250_pci: remove rts_n override from Baytrail quirk
  serial: cadence: Add generic earlycon support
  serial: imx: change the wait even to interruptiable
  serial: imx: terminate the RX DMA when the UART is suspending
  serial: imx: fix throttle/unthrottle callbacks for hardware assisted flow control
  serial: 8250: Add Quark X1000 to 8250_pci.c
  tty: omap-serial: pull out calculation from baud_is_mode16
  tty: omap-serial: fix division by zero
  xen_hvc: no reason to write the type key on xenstore
  tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx()
  tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused()
  ...
locking,arch: Use ACCESS_ONCE() instead of cast to volatile in atomic_read() 2014-10-03T04:06:23+00:00 Pranith Kumar bobby.prani@gmail.com 2014-09-23T14:29:50+00:00 2291059c852706c6f5ffb400366042b7625066cd Use the much more reader friendly ACCESS_ONCE() instead of the cast to volatile. This is purely a stylistic change. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/1411482607-20948-1-git-send-email-bobby.prani@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Use the much more reader friendly ACCESS_ONCE() instead of the cast to volatile.
This is purely a stylistic change.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1411482607-20948-1-git-send-email-bobby.prani@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sh: Set CONFIG_NET=y in defconfigs 2014-09-24T17:38:30+00:00 Michal Marek mmarek@suse.cz 2014-09-23T15:44:03+00:00 925f7fadadd2fcafa6fea19252e4a1de412b9b85 Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-sh@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> 
Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET
instead of selecting NET") removed what happened to be the only instance
of 'select NET'. Defconfigs that were relying on the select now lack
networking support.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
ARCH: AUDIT: audit_syscall_entry() should not require the arch 2014-09-23T20:21:26+00:00 Eric Paris eparis@redhat.com 2014-03-11T17:29:28+00:00 91397401bb5072f71e8ce8744ad0bdec3e875a91 We have a function where the arch can be queried, syscall_get_arch(). So rather than have every single piece of arch specific code use and/or duplicate syscall_get_arch(), just have the audit code use the syscall_get_arch() code. Based-on-patch-by: Richard Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ia64@vger.kernel.org Cc: microblaze-uclinux@itee.uq.edu.au Cc: linux-mips@linux-mips.org Cc: linux@lists.openrisc.net Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: x86@kernel.org 
We have a function where the arch can be queried, syscall_get_arch().
So rather than have every single piece of arch specific code use and/or
duplicate syscall_get_arch(), just have the audit code use the
syscall_get_arch() code.

Based-on-patch-by: Richard Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-ia64@vger.kernel.org
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: linux-mips@linux-mips.org
Cc: linux@lists.openrisc.net
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-xtensa@linux-xtensa.org
Cc: x86@kernel.org