This registers the new fchmodat2 syscall in most places as nuber 452,
with alpha being the exception where it's 562.  I found all these sites
by grepping for fspick, which I assume has found me everything.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Message-Id: <a677d521f048e4ca439e7080a5328f21eb8e960e.1689092120.git.legion@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull sh updates from Adrian Glaubitz:
 "Fix a compiler warning in the J2 probing code and a fix by Sergey
  Shtylyov to avoid using IRQ0 on SH3 and SH4 targets. Masahiro Yamada
  made some clean-up in the build system to address reports by the 0day
  bot.

  The most notable changes come from Artur Rojek who addressed a number
  of issues in the DMA code, in particular a fix for the DMA channel
  offset calculation that was introduced in in 7f47c7189b3e ("sh: dma:
  More legacy cpu dma chainsawing.") in 2012!

  Together with another change to correct the number of DMA channels for
  each SuperH SoC according to specification, Artur's series unbreaks
  the kernel on the SH7709 SoC allowing Linux to boot on the HP Jornada
  680 handheld again.

  Summary:

   - Provide unxlate_dev_mem_ptr() in asm/io.h

   - dma: Correct the number of DMA channels for SH7709

   - dma: Drop incorrect SH_DMAC_BASE1 definition for SH4

   - dma: Fix DMA channel offset calculation

   - Remove compiler flag duplication

   - Refactor header include path addition

   - Move build rule for cchips/hd6446x/ to arch/sh/Kbuild

   - Fix -Wmissing-include-dirs warnings for various platforms

   - Avoid using IRQ0 on SH3 and SH4

   - j2: Use ioremap() to translate device tree address into kernel
     memory"

* tag 'sh-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: Provide unxlate_dev_mem_ptr() in asm/io.h
  sh: dma: Correct the number of DMA channels for SH7709
  sh: dma: Drop incorrect SH_DMAC_BASE1 definition for SH4
  sh: dma: Fix DMA channel offset calculation
  sh: Remove compiler flag duplication
  sh: Refactor header include path addition
  sh: Move build rule for cchips/hd6446x/ to arch/sh/Kbuild
  sh: Fix -Wmissing-include-dirs warnings for various platforms
  sh: Avoid using IRQ0 on SH3 and SH4
  sh: j2: Use ioremap() to translate device tree address into kernel memory

Pull mm updates from Andrew Morton:

 - Yosry Ahmed brought back some cgroup v1 stats in OOM logs

 - Yosry has also eliminated cgroup's atomic rstat flushing

 - Nhat Pham adds the new cachestat() syscall. It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability

 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning

 - Lorenzo Stoakes has done some maintanance work on the
   get_user_pages() interface

 - Liam Howlett continues with cleanups and maintenance work to the
   maple tree code. Peng Zhang also does some work on maple tree

 - Johannes Weiner has done some cleanup work on the compaction code

 - David Hildenbrand has contributed additional selftests for
   get_user_pages()

 - Thomas Gleixner has contributed some maintenance and optimization
   work for the vmalloc code

 - Baolin Wang has provided some compaction cleanups,

 - SeongJae Park continues maintenance work on the DAMON code

 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting

 - Christoph Hellwig has some cleanups for the filemap/directio code

 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the
   provided APIs rather than open-coding accesses

 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings

 - John Hubbard has a series of fixes to the MM selftesting code

 - ZhangPeng continues the folio conversion campaign

 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock

 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
   from 128 to 8

 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management

 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code

 - Vishal Moola also has done some folio conversion work

 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
  mm/hugetlb: remove hugetlb_set_page_subpool()
  mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
  hugetlb: revert use of page_cache_next_miss()
  Revert "page cache: fix page_cache_next/prev_miss off by one"
  mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
  mm: memcg: rename and document global_reclaim()
  mm: kill [add|del]_page_to_lru_list()
  mm: compaction: convert to use a folio in isolate_migratepages_block()
  mm: zswap: fix double invalidate with exclusive loads
  mm: remove unnecessary pagevec includes
  mm: remove references to pagevec
  mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
  mm: remove struct pagevec
  net: convert sunrpc from pagevec to folio_batch
  i915: convert i915_gpu_error to use a folio_batch
  pagevec: rename fbatch_count()
  mm: remove check_move_unevictable_pages()
  drm: convert drm_gem_put_pages() to use a folio_batch
  i915: convert shmem_sg_free_table() to use a folio_batch
  scatterlist: add sg_set_folio()
  ...

Pull hardening updates from Kees Cook:
 "There are three areas of note:

  A bunch of strlcpy()->strscpy() conversions ended up living in my tree
  since they were either Acked by maintainers for me to carry, or got
  ignored for multiple weeks (and were trivial changes).

  The compiler option '-fstrict-flex-arrays=3' has been enabled
  globally, and has been in -next for the entire devel cycle. This
  changes compiler diagnostics (though mainly just -Warray-bounds which
  is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
  coverage. In other words, there are no new restrictions, just
  potentially new warnings. Any new FORTIFY warnings we've seen have
  been fixed (usually in their respective subsystem trees). For more
  details, see commit df8fc4e934c12b.

  The under-development compiler attribute __counted_by has been added
  so that we can start annotating flexible array members with their
  associated structure member that tracks the count of flexible array
  elements at run-time. It is possible (likely?) that the exact syntax
  of the attribute will change before it is finalized, but GCC and Clang
  are working together to sort it out. Any changes can be made to the
  macro while we continue to add annotations.

  As an example of that last case, I have a treewide commit waiting with
  such annotations found via Coccinelle:

    https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b

  Also see commit dd06e72e68bcb4 for more details.

  Summary:

   - Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)

   - Convert strreplace() to return string start (Andy Shevchenko)

   - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)

   - Add missing function prototypes seen with W=1 (Arnd Bergmann)

   - Fix strscpy() kerndoc typo (Arne Welzel)

   - Replace strlcpy() with strscpy() across many subsystems which were
     either Acked by respective maintainers or were trivial changes that
     went ignored for multiple weeks (Azeem Shaikh)

   - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)

   - Add KUnit tests for strcat()-family

   - Enable KUnit tests of FORTIFY wrappers under UML

   - Add more complete FORTIFY protections for strlcat()

   - Add missed disabling of FORTIFY for all arch purgatories.

   - Enable -fstrict-flex-arrays=3 globally

   - Tightening UBSAN_BOUNDS when using GCC

   - Improve checkpatch to check for strcpy, strncpy, and fake flex
     arrays

   - Improve use of const variables in FORTIFY

   - Add requested struct_size_t() helper for types not pointers

   - Add __counted_by macro for annotating flexible array size members"

* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
  netfilter: ipset: Replace strlcpy with strscpy
  uml: Replace strlcpy with strscpy
  um: Use HOST_DIR for mrproper
  kallsyms: Replace all non-returning strlcpy with strscpy
  sh: Replace all non-returning strlcpy with strscpy
  of/flattree: Replace all non-returning strlcpy with strscpy
  sparc64: Replace all non-returning strlcpy with strscpy
  Hexagon: Replace all non-returning strlcpy with strscpy
  kobject: Use return value of strreplace()
  lib/string_helpers: Change returned value of the strreplace()
  jbd2: Avoid printing outside the boundary of the buffer
  checkpatch: Check for 0-length and 1-element arrays
  riscv/purgatory: Do not use fortified string functions
  s390/purgatory: Do not use fortified string functions
  x86/purgatory: Do not use fortified string functions
  acpi: Replace struct acpi_table_slit 1-element array with flex-array
  clocksource: Replace all non-returning strlcpy with strscpy
  string: use __builtin_memcpy() in strlcpy/strlcat
  staging: most: Replace all non-returning strlcpy with strscpy
  drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
  ...

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.371697797@linutronix.de

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230530163041.985456-1-azeemshaikh38@gmail.com

IRQ0 is no longer returned by platform_get_irq() and its ilk -- they now
return -EINVAL instead.  However, the kernel code supporting SH3/4-based
SoCs still maps the IRQ #s starting at 0 -- modify that code to start the
IRQ #s from 16 instead.

The patch should mostly affect the AP-SH4A-3A/AP-SH4AD-0A boards as they
indeed are using IRQ0 for the SMSC911x compatible Ethernet chip.

Fixes: ce753ad1549c ("platform: finally disallow IRQ0 in platform_get_irq() and its ilk")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/71105dbf-cdb0-72e1-f9eb-eeda8e321696@omp.ru
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

cachestat is previously only wired in for x86 (and architectures using
the generic unistd.h table):

https://lore.kernel.org/lkml/20230503013608.2431726-1-nphamcs@gmail.com/

This patch wires cachestat in for all the other architectures.

[nphamcs@gmail.com: wire up cachestat for arm64]
  Link: https://lkml.kernel.org/r/20230511092843.3896327-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230510195806.2902878-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>	[powerpc]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>		[s390]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Addresses the following warning when building j2_defconfig:

arch/sh/kernel/cpu/sh2/probe.c: In function 'scan_cache':
arch/sh/kernel/cpu/sh2/probe.c:24:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
   24 |  j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
      |

Fixes: 5a846abad07f ("sh: add support for J-Core J2 processor")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230503125746.331835-1-glaubitz@physik.fu-berlin.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

Pull SMP cross-CPU function-call updates from Ingo Molnar:

 - Remove diagnostics and adjust config for CSD lock diagnostics

 - Add a generic IPI-sending tracepoint, as currently there's no easy
   way to instrument IPI origins: it's arch dependent and for some major
   architectures it's not even consistently available.

* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  trace,smp: Trace all smp_function_call*() invocations
  trace: Add trace_ipi_send_cpu()
  sched, smp: Trace smp callback causing an IPI
  smp: reword smp call IPI comment
  treewide: Trace IPIs sent via smp_send_reschedule()
  irq_work: Trace self-IPIs sent via arch_irq_work_raise()
  smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
  sched, smp: Trace IPIs sent via send_call_function_single_ipi()
  trace: Add trace_ipi_send_cpumask()
  kernel/smp: Make csdlock_debug= resettable
  locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
  locking/csd_lock: Remove added data from CSD lock debugging
  locking/csd_lock: Add Kconfig option for csd_debug default