linux.git/arch/sh/kernel, branch v4.18

Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables

2018-06-14T03:21:18+00:00

The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.

That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.

HOWEVER.

It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_NONE is not set
  # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_STACKPROTECTOR_AUTO=y

and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.

The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one.  This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).

This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_STACKPROTECTOR=y
  CONFIG_STACKPROTECTOR_STRONG=y
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.

Acked-by: Masahiro Yamada 
Signed-off-by: Linus Torvalds

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-05T02:59:22+00:00

Pull irq updates from Thomas Gleixner:

 - Consolidation of softirq pending:

   The softirq mask and its accessors/mutators have many implementations
   scattered around many architectures. Most do the same things
   consisting in a field in a per-cpu struct (often irq_cpustat_t)
   accessed through per-cpu ops. We can provide instead a generic
   efficient version that most of them can use. In fact s390 is the only
   exception because the field is stored in lowcore.

 - Support for level!?! triggered MSI (ARM)

   Over the past couple of years, we've seen some SoCs coming up with
   ways of signalling level interrupts using a new flavor of MSIs, where
   the MSI controller uses two distinct messages: one that raises a
   virtual line, and one that lowers it. The target MSI controller is in
   charge of maintaining the state of the line.

   This allows for a much simplified HW signal routing (no need to have
   hundreds of discrete lines to signal level interrupts if you already
   have a memory bus), but results in a departure from the current idea
   the kernel has of MSIs.

 - Support for Meson-AXG GPIO irqchip

 - Large stm32 irqchip rework (suspend/resume, hierarchical domains)

 - More SPDX conversions

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  ARM: dts: stm32: Add exti support to stm32mp157 pinctrl
  ARM: dts: stm32: Add exti support for stm32mp157c
  pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
  irqchip/stm32: Add suspend/resume support for hierarchy domain
  irqchip/stm32: Add stm32mp1 support with hierarchy domain
  irqchip/stm32: Prepare common functions
  irqchip/stm32: Add host and driver data structures
  irqchip/stm32: Add suspend support
  irqchip/stm32: Add falling pending register support
  irqchip/stm32: Checkpatch fix
  irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain
  irqchip/meson-gpio: Add support for Meson-AXG SoCs
  dt-bindings: interrupt-controller: New binding for Meson-AXG SoC
  dt-bindings: interrupt-controller: Fix the double quotes
  softirq/s390: Move default mutators of overwritten softirq mask to s390
  softirq/x86: Switch to generic local_softirq_pending() implementation
  softirq/sparc: Switch to generic local_softirq_pending() implementation
  softirq/powerpc: Switch to generic local_softirq_pending() implementation
  softirq/parisc: Switch to generic local_softirq_pending() implementation
  softirq/ia64: Switch to generic local_softirq_pending() implementation
  ...

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2018-06-04T22:23:48+00:00

Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...

Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping

2018-06-04T17:58:12+00:00

Pull dma-mapping updates from Christoph Hellwig:

 - replace the force_dma flag with a dma_configure bus method. (Nipun
   Gupta, although one patch is іncorrectly attributed to me due to a
   git rebase bug)

 - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)

 - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
   right thing for bounce buffering.

 - move dma-debug initialization to common code, and apply a few
   cleanups to the dma-debug code.

 - cleanup the Kconfig mess around swiotlb selection

 - swiotlb comment fixup (Yisheng Xie)

 - a trivial swiotlb fix. (Dan Carpenter)

 - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)

 - add a new generic dma-noncoherent dma_map_ops implementation and use
   it for arc, c6x and nds32.

 - improve scatterlist validity checking in dma-debug. (Robin Murphy)

 - add a struct device quirk to limit the dma-mask to 32-bit due to
   bridge/system issues, and switch x86 to use it instead of a local
   hack for VIA bridges.

 - handle devices without a dma_mask more gracefully in the dma-direct
   code.

* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
  dma-direct: don't crash on device without dma_mask
  nds32: use generic dma_noncoherent_ops
  nds32: implement the unmap_sg DMA operation
  nds32: consolidate DMA cache maintainance routines
  x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
  x86/pci-dma: remove the explicit nodac and allowdac option
  x86/pci-dma: remove the experimental forcesac boot option
  Documentation/x86: remove a stray reference to pci-nommu.c
  core, dma-direct: add a flag 32-bit dma limits
  dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
  dma-debug: check scatterlist segments
  c6x: use generic dma_noncoherent_ops
  arc: use generic dma_noncoherent_ops
  arc: fix arc_dma_{map,unmap}_page
  arc: fix arc_dma_sync_sg_for_{cpu,device}
  arc: simplify arc_dma_sync_single_for_{cpu,device}
  dma-mapping: provide a generic dma-noncoherent implementation
  dma-mapping: simplify Kconfig dependencies
  riscv: add swiotlb support
  riscv: only enable ZONE_DMA32 for 64-bit
  ...

signal/sh: Stop gcc warning about an impossible case in do_divide_error

2018-05-29T14:59:21+00:00

Geert Uytterhoeven  reported:
>   HOSTLD  scripts/mod/modpost
>   CC      arch/sh/kernel/traps_32.o
> arch/sh/kernel/traps_32.c: In function 'do_divide_error':
> arch/sh/kernel/traps_32.c:606:17: error: 'code' may be used uninitialized in this function [-Werror=uninitialized]
> cc1: all warnings being treated as errors

It is clear from inspection that do_divide_error is only called with
TRAP_DIVZERO_ERROR or TRAP_DIVOVF_ERROR, as that is the way
set_exception_table_vec is called.  So let gcc know the other cases
should not be considered by returning in all other cases.

This removes the warning and let's the code continue to build.

Reported-by: Geert Uytterhoeven 
Fixes: c65626c0cd4d ("signal/sh: Use force_sig_fault where appropriate")
Signed-off-by: "Eric W. Biederman"

softirq/sh: Use nmi_count() on /proc/interrupts print out

2018-05-14T09:25:27+00:00

Use nmi_count() instead of accessing directly the irq_stat structure.
Its implementation is going to change to use per-CPU, so defer the guts
to standard API instead.

Signed-off-by: Frederic Weisbecker 
Acked-by: Thomas Gleixner 
Acked-by: Peter Zijlstra 
Cc: Benjamin Herrenschmidt 
Cc: David S. Miller 
Cc: Fenghua Yu 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: James E.J. Bottomley 
Cc: Linus Torvalds 
Cc: Martin Schwidefsky 
Cc: Michael Ellerman 
Cc: Paul Mackerras 
Cc: Rich Felker 
Cc: Sebastian Andrzej Siewior 
Cc: Tony Luck 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/1525786706-22846-4-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar

sh: switch to NO_BOOTMEM

2018-05-11T17:35:46+00:00

Commit 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
inadvertently switched the DT unflattening allocations from memblock to
bootmem which doesn't work because the unflattening happens before
bootmem is initialized. Swapping the order of bootmem init and
unflattening could also fix this, but removing bootmem is desired. So
enable NO_BOOTMEM on SH like other architectures have done.

Fixes: 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
Reported-by: Rich Felker 
Cc: Yoshinori Sato 
Signed-off-by: Rob Herring 
Signed-off-by: Rich Felker

PCI: remove PCI_DMA_BUS_IS_PHYS

2018-05-07T05:15:41+00:00

This was used by the ide, scsi and networking code in the past to
determine if they should bounce payloads.  Now that the dma mapping
always have to support dma to all physical memory (thanks to swiotlb
for non-iommu systems) there is no need to this crude hack any more.

Signed-off-by: Christoph Hellwig 
Acked-by: Palmer Dabbelt  (for riscv)
Reviewed-by: Jens Axboe

sh: fix build failure for J2 cpu with SMP disabled

2018-05-05T20:51:40+00:00

The sh asm/smp.h defines a fallback hard_smp_processor_id macro for
the !SMP case, but linux/smp.h never includes asm/smp.h in the !SMP
case.

Signed-off-by: Rich Felker

signal/sh: Use force_sig_fault where appropriate

2018-04-25T15:44:09+00:00

Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.

Simplify this process by using the helper force_sig_fault.  Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.

In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.

Cc: Yoshinori Sato 
Cc: Rich Felker 
Cc: linux-sh@vger.kernel.org
Acked-by: Rich Felker 
Signed-off-by: "Eric W. Biederman"