linux.git/arch/sh/kernel/cpu, branch v3.11 Linux kernel source tree sh: delete __cpuinit usage from all sh files 2013-07-14T23:36:53+00:00 Paul Gortmaker paul.gortmaker@windriver.com 2013-06-18T21:10:12+00:00 4603f53a1dc3c76dfba841d123db9fa6204934f5 The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/sh uses of the __cpuinit macros from all C files. Currently sh does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> 
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/sh uses of the __cpuinit macros from
all C files.  Currently sh does not have any __CPUINIT used in
assembly files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
sh_eth: get SH7724 support out of #ifdef 2013-06-08T06:38:24+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2013-06-07T14:03:37+00:00 9c3beaabb951d672b1534c7f56f84054b088f879 Get the SH7724 code/data in the driver out of #ifdef by adding "r8a7724-ether" to the platform driver's ID table. Change the Ether platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Get the SH7724 code/data in the driver out of #ifdef by adding "r8a7724-ether"
to the platform driver's ID table. Change the Ether platform device's name in
the SH platform code accordingly.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sh_eth: get SH77{34|63} support out of #ifdef 2013-06-08T06:38:24+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2013-06-07T13:58:18+00:00 f5d12767c8fd77e29d3d6771de59fd9ac3e540bb Get the SH77{34|63} specific code/data in the driver out of #ifdef by adding "sh7734-gether" and "sh7763-gether" to the platform driver's ID table. Note that we have to split the 'struct sh_eth_cpu_data' instance into two due to #ifdef inside it; note that we can kill the duplicate sh_eth_set_rate_gether(). Change the GEther platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Get the SH77{34|63} specific code/data in the driver out of #ifdef by adding
"sh7734-gether" and "sh7763-gether" to the platform driver's ID table.  Note
that we have to split the 'struct sh_eth_cpu_data' instance into two due to
#ifdef inside it; note that we can kill the duplicate sh_eth_set_rate_gether().
Change the GEther platform device's name in the SH platform code accordingly.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sh_eth: get SH7619 support out of #ifdef 2013-06-08T06:38:23+00:00 Sergei Shtylyov sergei.shtylyov@cogentembedded.com 2013-06-07T13:56:05+00:00 c18a79abe31f555ec3b363b5b8c1d003230053b6 Get the SH7619 data in the driver out of #ifdef by adding "sh7619-ether" to the platform driver's ID table. Change the Ether platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Get  the SH7619 data in the driver out of #ifdef by adding "sh7619-ether" to the
platform driver's ID table. Change the Ether platform device's name  in  the SH
platform code accordingly.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux 2013-05-09T16:59:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-05-09T16:59:16+00:00 5647ac0ad4f355817b788372a01cb293ed63bde4 Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select 
Pull removal of GENERIC_GPIO from Grant Likely:
 "GENERIC_GPIO now synonymous with GPIOLIB.  There are no longer any
  valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
  is possible to do so which has been causing confusion and breakage.
  This branch does the work to completely eliminate GENERIC_GPIO."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
  gpio: update gpio Chinese documentation
  Remove GENERIC_GPIO config option
  Convert selectors of GENERIC_GPIO to GPIOLIB
  blackfin: force use of gpiolib
  m68k: coldfire: use gpiolib
  mips: pnx833x: remove requirement for GENERIC_GPIO
  openrisc: default GENERIC_GPIO to false
  avr32: default GENERIC_GPIO to false
  xtensa: remove explicit selection of GENERIC_GPIO
  sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
  powerpc: remove redundant GENERIC_GPIO selection
  unicore32: default GENERIC_GPIO to false
  unicore32: remove unneeded select GENERIC_GPIO
  arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
  arm: remove redundant GENERIC_GPIO selection
  mips: alchemy: require gpiolib
  mips: txx9: change GENERIC_GPIO to GPIOLIB
  mips: loongson: use GPIO driver on CONFIG_GPIOLIB
  mips: remove redundant GENERIC_GPIO select
Merge tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2013-05-07T17:57:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-05-07T17:57:51+00:00 a8c4b90e670be3b01e9395c7310639c8109fc77e Pull ARM SoC platform updates (part 2) from Arnd Bergmann: "These patches are all for Renesas shmobile, and depend on the earlier pinctrl updates. Remarkably, this adds support for three new SoCs: r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is for pinctrl (using the new subsystem) and for clocks (not yet using the common clock subsystem). The latter will have to get converted in one of the upcoming releases, but shmobile is not ready for that yet. The series also contains Renesas shmobile board changes, adding one board file for each of the three new SoCs. These boards are using a mix of classic and device-tree based probing, as there is still a lot of infrastructure in shmobile that has not been converted to DT yet. Once those are resolved to the degree that no board specific setup code is needed, they can get folded into the respective SoC setup files." * tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits) ARM: shmobile: use r8a7790 timer setup code on Lager ARM: shmobile: force enable of r8a7790 arch timer ARM: shmobile: Add second I/O range for r8a7790 PFC ARM: shmobile: bockw: enable network settings on bootargs ARM: shmobile: bockw: add SMSC ethernet support ARM: shmobile: R8A7778: add Ether support ARM: shmobile: bockw: enable SMSC ethernet on defconfig ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin() ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO() ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection ARM: shmobile: mackerel: add interrupt names for SDHI0 ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio ARM: shmobile: mackerel: remove OCR masks, where regulators are used ARM: shmobile: mackerel: SDHI resources do not have to be numbered ARM: shmobile: Initial r8a7790 Lager board support ARM: shmobile: APE6EVM LAN9220 support ARM: shmobile: APE6EVM PFC support ARM: shmobile: APE6EVM base support ARM: shmobile: kzm9g-reference: add ethernet support ARM: shmobile: add R-Car M1A Bock-W platform support ... 
Pull ARM SoC platform updates (part 2) from Arnd Bergmann:
 "These patches are all for Renesas shmobile, and depend on the earlier
  pinctrl updates.  Remarkably, this adds support for three new SoCs:
  r8a73a4, r8a73a4 and r8a7778.  The bulk of the code added for these is
  for pinctrl (using the new subsystem) and for clocks (not yet using
  the common clock subsystem).  The latter will have to get converted in
  one of the upcoming releases, but shmobile is not ready for that yet.

  The series also contains Renesas shmobile board changes, adding one
  board file for each of the three new SoCs.  These boards are using a
  mix of classic and device-tree based probing, as there is still a lot
  of infrastructure in shmobile that has not been converted to DT yet.
  Once those are resolved to the degree that no board specific setup
  code is needed, they can get folded into the respective SoC setup files."

* tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: shmobile: use r8a7790 timer setup code on Lager
  ARM: shmobile: force enable of r8a7790 arch timer
  ARM: shmobile: Add second I/O range for r8a7790 PFC
  ARM: shmobile: bockw: enable network settings on bootargs
  ARM: shmobile: bockw: add SMSC ethernet support
  ARM: shmobile: R8A7778: add Ether support
  ARM: shmobile: bockw: enable SMSC ethernet on defconfig
  ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()
  ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO()
  ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection
  ARM: shmobile: mackerel: add interrupt names for SDHI0
  ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio
  ARM: shmobile: mackerel: remove OCR masks, where regulators are used
  ARM: shmobile: mackerel: SDHI resources do not have to be numbered
  ARM: shmobile: Initial r8a7790 Lager board support
  ARM: shmobile: APE6EVM LAN9220 support
  ARM: shmobile: APE6EVM PFC support
  ARM: shmobile: APE6EVM base support
  ARM: shmobile: kzm9g-reference: add ethernet support
  ARM: shmobile: add R-Car M1A Bock-W platform support
  ...
Merge tag 'renesas-pinctrl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2013-05-04T19:32:41+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-05-04T19:32:41+00:00 22b154365fbc096a46d936ec1f462ef8b9bd1f05 Pull ARM SoC pinctrl changes for Renesas from Olof Johansson: "This is yet another driver change, which is split out just because of its size. As already in 3.9, a lot of changes are going on here, as the shmobile platform gets converted from its own pin control API to the generic drivers/pinctrl subsystem. Based on agreements with Paul Mundt, we are merging the sh-arch-side changes here as well" * tag 'renesas-pinctrl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (142 commits) ARM: shmobile: r8a7779: Remove INTC function GPIOs ARM: shmobile: r8a7779: Remove LBSC function GPIOs ARM: shmobile: r8a7779: Remove USB function GPIOs ARM: shmobile: r8a7779: Remove HSPI function GPIOs ARM: shmobile: r8a7779: Remove SCIF function GPIOs ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs ARM: shmobile: r8a7779: Remove DU function GPIOs ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs ARM: shmobile: sh73a0: Remove IrDA function GPIOs ARM: shmobile: sh73a0: Remove USB function GPIOs ARM: shmobile: sh73a0: Remove BSC function GPIOs ARM: shmobile: sh73a0: Remove KEYSC function GPIOs ARM: shmobile: sh73a0: Remove pull-up function GPIOS ARM: shmobile: sh73a0: Remove FSI function GPIOs ARM: shmobile: sh73a0: Remove I2C function GPIOs ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs ... 
Pull ARM SoC pinctrl changes for Renesas from Olof Johansson:
 "This is yet another driver change, which is split out just because of
  its size.  As already in 3.9, a lot of changes are going on here, as
  the shmobile platform gets converted from its own pin control API to
  the generic drivers/pinctrl subsystem.

  Based on agreements with Paul Mundt, we are merging the sh-arch-side
  changes here as well"

* tag 'renesas-pinctrl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (142 commits)
  ARM: shmobile: r8a7779: Remove INTC function GPIOs
  ARM: shmobile: r8a7779: Remove LBSC function GPIOs
  ARM: shmobile: r8a7779: Remove USB function GPIOs
  ARM: shmobile: r8a7779: Remove HSPI function GPIOs
  ARM: shmobile: r8a7779: Remove SCIF function GPIOs
  ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs
  ARM: shmobile: r8a7779: Remove DU function GPIOs
  ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
  ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs
  ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs
  ARM: shmobile: sh73a0: Remove IrDA function GPIOs
  ARM: shmobile: sh73a0: Remove USB function GPIOs
  ARM: shmobile: sh73a0: Remove BSC function GPIOs
  ARM: shmobile: sh73a0: Remove KEYSC function GPIOs
  ARM: shmobile: sh73a0: Remove pull-up function GPIOS
  ARM: shmobile: sh73a0: Remove FSI function GPIOs
  ARM: shmobile: sh73a0: Remove I2C function GPIOs
  ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs
  ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs
  ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs
  ...
SH: cpuidle: use init/exit common routine 2013-04-24T11:58:32+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2013-04-23T14:41:17+00:00 b181a3b03f866776211f22390c185c4da1dc45ff Remove the duplicated code and use the cpuidle common code for initialization. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Remove the duplicated code and use the cpuidle common code for initialization.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpuidle: remove en_core_tk_irqen flag 2013-04-23T11:45:22+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2013-04-23T08:54:31+00:00 554c06ba3ee29cf453fca17e9e61120b75aa476d The en_core_tk_irqen flag is set in all the cpuidle driver which means it is not necessary to specify this flag. Remove the flag and the code related to it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> # for mach-omap2/* Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
The en_core_tk_irqen flag is set in all the cpuidle driver which
means it is not necessary to specify this flag.

Remove the flag and the code related to it.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>  # for mach-omap2/*
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
SH: cpuidle: check error code at init 2013-04-21T22:35:53+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2013-04-17T13:32:57+00:00 38a94f4169e03494cbf850919b4b0a7e53e84bfd Registering the driver, or the device, can fail, let's check the return code and return the error code to the PM layer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Registering the driver, or the device, can fail, let's check the return code
and return the error code to the PM layer.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>