The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d5597793 ("sched/core: Remove pointless printout in
sched_show_task()").  Remove the implementations as well.

Some architectures use thread_saved_pc() in their arch-specific code.
Leave their thread_saved_pc() intact.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull s390 bugfix from Martin Schwidefsky:
 "One last s390 patch for 4.12

  Revert the re-IPL semantics back to the v4.7 state. It turned out that
  the memory layout may change due to memory hotplug if load-normal is
  used"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL

KVM: s390: fix shadow table handling for nested guests

Some odd-ball cases (real-space designation ASCEs) are handled wrong
for the shadow page tables. Fix it.

For real-space designation asces the asce origin part is only a token.
The asce token origin must not be used to generate an effective
address for storage references. This however is erroneously done
within kvm_s390_shadow_tables().

Furthermore within the same function the wrong parts of virtual
addresses are used to generate a corresponding real address
(e.g. the region second index is used as region first index).

Both of the above can result in incorrect address translations. Only
for real space designations with a token origin of zero and addresses
below one megabyte the translation was correct.

Furthermore replace a "!asce.r" statement with a "!*fake" statement to
make it more obvious that a specific condition has nothing to do with
the architecture, but with the fake handling of real space designations.

Fixes: 3218f7094b6b ("s390/mm: support real-space for gmap shadows")
Cc: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.

This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.

Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.

One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications.  For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).

Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.

Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.

Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts the two commits

7afbeb6df2aa ("s390/ipl: always use load normal for CCW-type re-IPL")
0f7451ff3ab8 ("s390/ipl: use load normal for LPAR re-ipl")

The two commits did not take into account that behavior of standby
memory changes fundamentally if the re-IPL method is changed from
Load Clear to Load Normal.

In case of the old re-IPL clear method all memory that was initially
in standby state will be put into standby state again within the
re-IPL process. Or in other words: memory that was brought online
before a re-IPL will be offline again after a reboot.

Given that we use different re-IPL methods depending on the hypervisor
and CCW-type vs SCSI re-IPL it is not easy to tell in advance when and
why memory will stay online or will be offline after a re-IPL.
This does also have other side effects, since memory that is online
from the beginning will be in ZONE_NORMAL by default vs ZONE_MOVABLE
for memory that is offline.

Therefore, before the change, a user could online and offline memory
easily since standby memory was always in ZONE_NORMAL.  After the
change, and a re-IPL, this depended on which memory parts were online
before the re-IPL.

From a usability point of view the current behavior is more than
suboptimal. Therefore revert these changes until we have a better
solution and get back to a consistent behavior. The bad thing about
this is that the time required for a re-IPL will be significantly
increased for configurations with several 100GB or 1TB of memory.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull s390 fixes from Martin Schwidefsky:

 - A fix for KVM to avoid kernel oopses in case of host protection
   faults due to runtime instrumentation

 - A fix for the AP bus to avoid dead devices after unbind / bind

 - A fix for a compile warning merged from the vfio_ccw tree

 - Updated default configurations

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfig
  s390/zcrypt: Fix blocking queue device after unbind/bind.
  s390/vfio_ccw: make some symbols static
  s390/kvm: do not rely on the ILC on kvm host protection fauls

Pull key subsystem fixes from James Morris:
 "Here are a bunch of fixes for Linux keyrings, including:

   - Fix up the refcount handling now that key structs use the
     refcount_t type and the refcount_t ops don't allow a 0->1
     transition.

   - Fix a potential NULL deref after error in x509_cert_parse().

   - Don't put data for the crypto algorithms to use on the stack.

   - Fix the handling of a null payload being passed to add_key().

   - Fix incorrect cleanup an uninitialised key_preparsed_payload in
     key_update().

   - Explicit sanitisation of potentially secure data before freeing.

   - Fixes for the Diffie-Helman code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
  KEYS: fix refcount_inc() on zero
  KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API
  crypto : asymmetric_keys : verify_pefile:zero memory content before freeing
  KEYS: DH: add __user annotations to keyctl_kdf_params
  KEYS: DH: ensure the KDF counter is properly aligned
  KEYS: DH: don't feed uninitialized "otherinfo" into KDF
  KEYS: DH: forbid using digest_null as the KDF hash
  KEYS: sanitize key structs before freeing
  KEYS: trusted: sanitize all key material
  KEYS: encrypted: sanitize all key material
  KEYS: user_defined: sanitize key payloads
  KEYS: sanitize add_key() and keyctl() key payloads
  KEYS: fix freeing uninitialized memory in key_update()
  KEYS: fix dereferencing NULL payload with nonzero length
  KEYS: encrypted: use constant-time HMAC comparison
  KEYS: encrypted: fix race causing incorrect HMAC calculations
  KEYS: encrypted: fix buffer overread in valid_master_desc()
  KEYS: encrypted: avoid encrypting/decrypting stack buffers
  KEYS: put keyring if install_session_keyring_to_cred() fails
  KEYS: Delete an error message for a failed memory allocation in get_derived_key()
  ...

CONFIG_KEYS_COMPAT is defined in arch-specific Kconfigs and is missing for
several 64-bit architectures : mips, parisc, tile.

At the moment and for those architectures, calling in 32-bit userspace the
keyctl syscall would return an ENOSYS error.

This patch moves the CONFIG_KEYS_COMPAT option to security/keys/Kconfig, to
make sure the compatibility wrapper is registered by default for any 64-bit
architecture as long as it is configured with CONFIG_COMPAT.

[DH: Modified to remove arm64 compat enablement also as requested by Eric
 Biggers]

Signed-off-by: Bilal Amarni <bilal.amarni@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
cc: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

KVM: s390: Fix for master (4.12)

- The newly created AIS capability enables the feature unconditionally
  and ignores the cpu model