linux.git/arch/s390/kernel/vmlinux.lds.S, branch v4.12

s390: move _text symbol to address higher than zero

2017-05-09T08:44:38+00:00

The perf tool assumes that kernel symbols are never present at address
zero. In fact it assumes if functions that map symbols to addresses
return zero, that the symbol was not found.

Given that s390's _text symbol historically is located at address zero
this yields at least a couple of false errors and warnings in one of
perf's test cases about not present symbols ("perf test 1").

To fix this simply move the _text symbol to address 0x200, just behind
the initial psw and channel program located at the beginning of the
kernel image. This is now hard coded within the linker script.

I tried a nicer solution which moves the initial psw and channel
program into an own section. However that would move the symbols
within the "real" head.text section to different addresses, since the
".org" statements within head.S are relative to the head.text
section. If there is a new section in front, everything else will be
moved. Alternatively I could have adjusted all ".org" statements. But
this current solution seems to be the easiest one, since nobody really
cares where the _text symbol is actually located.

Reported-by: Zvonko Kosic 
Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

mm: fix section name for .data..ro_after_init

2017-04-01T00:13:30+00:00

A section name for .data..ro_after_init was added by both:

    commit d07a980c1b8d ("s390: add proper __ro_after_init support")

and

    commit d7c19b066dcf ("mm: kmemleak: scan .data.ro_after_init")

The latter adds incorrect wrapping around the existing s390 section, and
came later.  I'd prefer the s390 naming, so this moves the s390-specific
name up to the asm-generic/sections.h and renames the section as used by
kmemleak (and in the future, kernel/extable.c).

Link: http://lkml.kernel.org/r/20170327192213.GA129375@beast
Signed-off-by: Kees Cook 
Acked-by: Heiko Carstens 	[s390 parts]
Acked-by: Jakub Kicinski 
Cc: Eddie Kovsky 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

s390: add no-execute support

2017-02-08T13:13:25+00:00

Bit 0x100 of a page table, segment table of region table entry
can be used to disallow code execution for the virtual addresses
associated with the entry.

There is one tricky bit, the system call to return from a signal
is part of the signal frame written to the user stack. With a
non-executable stack this would stop working. To avoid breaking
things the protection fault handler checks the opcode that caused
the fault for 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn)
and injects a system call. This is preferable to the alternative
solution with a stub function in the vdso because it works for
vdso=off and statically linked binaries as well.

Signed-off-by: Martin Schwidefsky

mm: kmemleak: scan .data.ro_after_init

2016-11-11T16:12:37+00:00

Limit the number of kmemleak false positives by including
.data.ro_after_init in memory scanning.  To achieve this we need to add
symbols for start and end of the section to the linker scripts.

The problem was been uncovered by commit 56989f6d8568 ("genetlink: mark
families as __ro_after_init").

Link: http://lkml.kernel.org/r/1478274173-15218-1-git-send-email-jakub.kicinski@netronome.com
Reviewed-by: Catalin Marinas 
Signed-off-by: Jakub Kicinski 
Cc: Arnd Bergmann 
Cc: Cong Wang 
Cc: Johannes Berg 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nmi_backtrace: generate one-line reports for idle cpus

2016-10-08T01:46:30+00:00

When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative.  Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".

We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.

This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.

Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf 
Acked-by: Peter Zijlstra (Intel) 
Tested-by: Peter Zijlstra (Intel) 
Tested-by: Daniel Thompson  [arm]
Tested-by: Petr Mladek 
Cc: Aaron Tomlin 
Cc: Peter Zijlstra (Intel) 
Cc: "Rafael J. Wysocki" 
Cc: Russell King 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

s390: add proper __ro_after_init support

2016-06-13T13:58:23+00:00

On s390 __ro_after_init is currently mapped to __read_mostly which
means that data marked as __ro_after_init will not be protected.

Reason for this is that the common code __ro_after_init implementation
is x86 centric: the ro_after_init data section was added to rodata,
since x86 enables write protection to kernel text and rodata very
late. On s390 we have write protection for these sections enabled with
the initial page tables. So adding the ro_after_init data section to
rodata does not work on s390.

In order to make __ro_after_init work properly on s390 move the
ro_after_init data, right behind rodata. Unlike the rodata section it
will be marked read-only later after all init calls happened.

This s390 specific implementation adds new __start_ro_after_init and
__end_ro_after_init labels. Everything in between will be marked
read-only after the init calls happened. In addition to the
__ro_after_init data move also the exception table there, since from a
practical point of view it fits the __ro_after_init requirements.

Signed-off-by: Heiko Carstens 
Reviewed-by: Kees Cook 
Signed-off-by: Martin Schwidefsky

s390/mm: align swapper_pg_dir to 16k

2016-06-13T13:58:18+00:00

The segment/region table that is part of the kernel image must be
properly aligned to 16k in order to make the crdte inline assembly
work.
Otherwise it will calculate a wrong segment/region table start address
and access incorrect memory locations if the swapper_pg_dir is not
aligned to 16k.

Therefore define BSS_FIRST_SECTIONS in order to put the swapper_pg_dir
at the beginning of the bss section and also align the bss section to
16k just like other architectures did.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections

2016-03-25T23:37:42+00:00

KASAN needs to know whether the allocation happens in an IRQ handler.
This lets us strip everything below the IRQ entry point to reduce the
number of unique stack traces needed to be stored.

Move the definition of __irq_entry to  so that the
users don't need to pull in .  Also introduce the
__softirq_entry macro which is similar to __irq_entry, but puts the
corresponding functions to the .softirqentry.text section.

Signed-off-by: Alexander Potapenko 
Acked-by: Steven Rostedt 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Joonsoo Kim 
Cc: Andrey Konovalov 
Cc: Dmitry Vyukov 
Cc: Andrey Ryabinin 
Cc: Konstantin Serebryany 
Cc: Dmitry Chernenkov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

s390: remove 31 bit support

2015-03-25T10:49:33+00:00

Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.

The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes: a960062e5826 ("s390: add 31 bit warning
message") which let everybody know about the plan to remove 31 bit
code. We didn't get any response.

Given that the last 31 bit only machine was introduced in 1999 let's
remove the code.
Anybody with 31 bit user space code can still use the compat mode.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

s390/linker skript: discard exit.data at runtime

2013-02-14T14:55:21+00:00

Discard exit.data section at run time, not link time, since exit.text
references exit.data and causes this build error:

`.exit.data' referenced in section `.exit.text' of drivers/built-in.o:
 defined in discarded section `.exit.data' of drivers/built-in.o

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky