linux.git/arch/s390/include/uapi, branch v5.19

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2022-05-26T21:20:14+00:00

Pull kvm updates from Paolo Bonzini:
 "S390:

   - ultravisor communication device driver

   - fix TEID on terminating storage key ops

  RISC-V:

   - Added Sv57x4 support for G-stage page table

   - Added range based local HFENCE functions

   - Added remote HFENCE functions based on VCPU requests

   - Added ISA extension registers in ONE_REG interface

   - Updated KVM RISC-V maintainers entry to cover selftests support

  ARM:

   - Add support for the ARMv8.6 WFxT extension

   - Guard pages for the EL2 stacks

   - Trap and emulate AArch32 ID registers to hide unsupported features

   - Ability to select and save/restore the set of hypercalls exposed to
     the guest

   - Support for PSCI-initiated suspend in collaboration with userspace

   - GICv3 register-based LPI invalidation support

   - Move host PMU event merging into the vcpu data structure

   - GICv3 ITS save/restore fixes

   - The usual set of small-scale cleanups and fixes

  x86:

   - New ioctls to get/set TSC frequency for a whole VM

   - Allow userspace to opt out of hypercall patching

   - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

  AMD SEV improvements:

   - Add KVM_EXIT_SHUTDOWN metadata for SEV-ES

   - V_TSC_AUX support

  Nested virtualization improvements for AMD:

   - Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
     nested vGIF)

   - Allow AVIC to co-exist with a nested guest running

   - Fixes for LBR virtualizations when a nested guest is running, and
     nested LBR virtualization support

   - PAUSE filtering for nested hypervisors

  Guest support:

   - Decoupling of vcpu_is_preempted from PV spinlocks"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
  KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
  KVM: selftests: x86: Sync the new name of the test case to .gitignore
  Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
  x86, kvm: use correct GFP flags for preemption disabled
  KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
  x86/kvm: Alloc dummy async #PF token outside of raw spinlock
  KVM: x86: avoid calling x86 emulator without a decoded instruction
  KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
  x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
  s390/uv_uapi: depend on CONFIG_S390
  KVM: selftests: x86: Fix test failure on arch lbr capable platforms
  KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
  KVM: s390: selftest: Test suppression indication on key prot exception
  KVM: s390: Don't indicate suppression on dirtying, failing memop
  selftests: drivers/s390x: Add uvdevice tests
  drivers/s390/char: Add Ultravisor io device
  MAINTAINERS: Update KVM RISC-V entry to cover selftests support
  RISC-V: KVM: Introduce ISA extension register
  RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
  RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
  ...

drivers/s390/char: Add Ultravisor io device

2022-05-20T14:38:35+00:00

This patch adds a new miscdevice to expose some Ultravisor functions
to userspace. Userspace can send IOCTLs to the uvdevice that will then
emit a corresponding Ultravisor Call and hands the result over to
userspace. The uvdevice is available if the Ultravisor Call facility is
present.
Userspace can call the Retrieve Attestation Measurement
Ultravisor Call using IOCTLs on the uvdevice.

The uvdevice will do some sanity checks first.
Then, copy the request data to kernel space, build the UVCB,
perform the UV call, and copy the result back to userspace.

Signed-off-by: Steffen Eiden 
Reviewed-by: Janosch Frank 
Reviewed-by: Claudio Imbrenda 
Link: https://lore.kernel.org/kvm/20220516113335.338212-1-seiden@linux.ibm.com/
Message-Id: <20220516113335.338212-1-seiden@linux.ibm.com>
Signed-off-by: Janosch Frank  (whitespace and  tristate fixes, pick)

s390/zcrypt: code cleanup

2022-04-25T11:54:14+00:00

This patch tries to fix as much as possible of the
checkpatch.pl --strict findings:
  CHECK: Logical continuations should be on the previous line
  CHECK: No space is necessary after a cast
  CHECK: Alignment should match open parenthesis
  CHECK: 'useable' may be misspelled - perhaps 'usable'?
  WARNING: Possible repeated word: 'is'
  CHECK: spaces preferred around that '*' (ctx:VxV)
  CHECK: Comparison to NULL could be written "!msg"
  CHECK: Prefer kzalloc(sizeof(*zc)...) over kzalloc(sizeof(struct...)...)
  CHECK: Unnecessary parentheses around resp_type->work
  CHECK: Avoid CamelCase: 

There is no functional change comming with this patch, only
code cleanup, renaming, whitespaces, indenting, ... but no
semantic change in any way. Also the API (zcrypt and pkey
header file) is semantically unchanged.

Signed-off-by: Harald Freudenberger 
Reviewed-by: Jürgen Christ 
Signed-off-by: Heiko Carstens

s390/zcrypt: cleanup CPRB struct definitions

2022-04-25T11:54:13+00:00

This patch does a little cleanup on the CPRBX struct
in zcrypt.h and the redundant CPRB struct definition in
zcrypt_msgtype6.c. Especially some of the misleading
fields from the CPRBX struct have been removed.

There is no semantic change coming with this patch.
The field names changed in the XCRB struct are only related
to reserved fields which should never been used.

Signed-off-by: Harald Freudenberger 
Reviewed-by: Jürgen Christ 
Signed-off-by: Heiko Carstens

Merge tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2022-03-25T17:01:34+00:00

Pull s390 updates from Vasily Gorbik:

- Raise minimum supported machine generation to z10, which comes with
various cleanups and code simplifications (usercopy/spectre
mitigation/etc).

- Rework extables and get rid of anonymous out-of-line fixups.

- Page table helpers cleanup. Add set_pXd()/set_pte() helper functions.
Covert pte_val()/pXd_val() macros to functions.

- Optimize kretprobe handling by avoiding extra kprobe on
__kretprobe_trampoline.

- Add support for CEX8 crypto cards.

- Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans.

- Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT
group sections which simplifies kpatch support.

- Always use the packed stack layout and extend kernel unwinder tests.

- Add sanity checks for ftrace code patching.

- Add s390dbf debug log for the vfio_ap device driver.

- Various virtual vs physical address confusion fixes.

- Various small fixes and improvements all over the code.

* tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits)
s390/test_unwind: add kretprobe tests
s390/kprobes: Avoid additional kprobe in kretprobe handling
s390: convert ".insn" encoding to instruction names
s390: assume stckf is always present
s390/nospec: move to single register thunks
s390: raise minimum supported machine generation to z10
s390/uaccess: Add copy_from/to_user_key functions
s390/nospec: align and size extern thunks
s390/nospec: add an option to use thunk-extern
s390/nospec: generate single register thunks if possible
s390/pci: make zpci_set_irq()/zpci_clear_irq() static
s390: remove unused expoline to BC instructions
s390/irq: use assignment instead of cast
s390/traps: get rid of magic cast for per code
s390/traps: get rid of magic cast for program interruption code
s390/signal: fix typo in comments
s390/asm-offsets: remove unused defines
s390/test_unwind: avoid build warning with W=1
s390: remove .fixup section
s390/bpf: encode register within extable entry
...

s390/zcrypt: CEX8S exploitation support

2022-03-07T23:33:00+00:00

This patch adds CEX8 exploitation support for the AP bus code,
the zcrypt device driver zoo and the vfio device driver.

Signed-off-by: Harald Freudenberger 
Reviewed-by: Jürgen Christ 
Signed-off-by: Vasily Gorbik

signal.h: add linux/signal.h and asm/signal.h to UAPI compile-test coverage

2022-02-17T08:09:36+00:00

linux/signal.h and asm/signal.h are currently excluded from the UAPI
compile-test because of the errors like follows:

    HDRTEST usr/include/asm/signal.h
  In file included from :
  ./usr/include/asm/signal.h:103:9: error: unknown type name ‘size_t’
    103 |         size_t ss_size;
        |         ^~~~~~

The errors can be fixed by replacing size_t with __kernel_size_t.

Then, remove the no-header-test entries from user/include/Makefile.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Arnd Bergmann 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Arnd Bergmann

s390: make command line configurable

2021-10-26T13:21:31+00:00

Allow to configure the command line to an arbitrary length, with a
default of 4096 bytes. Also remove COMMAND_LINE_SIZE from
include/uapi/asm/setup.h as this is dynamic now and doesn't tell
anything about the command line size limitations of a new kernel
that might be loaded.

Signed-off-by: Sven Schnelle 
Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390: support command lines longer than 896 bytes

2021-10-26T13:21:31+00:00

Currently s390 supports a fixed maximum command line length of 896
bytes. This isn't enough as some installers are trying to pass all
configuration data via kernel command line, and even with zfcp alone
it is easy to generate really long command lines. Therefore extend
the command line to 4 kbytes.

In the parm area where the command line is stored there is no indication
of the maximum allowed length, so a new field which contains the maximum
length is added.

The parm area has always been initialized to zero, so with old kernels
this field would read zero. This is important because tools like zipl
could read this field. If it contains a number larger than zero zipl
knows the maximum length that can be stored in the parm area, otherwise
it must assume that it is booting a legacy kernel and only 896 bytes are
available.

The removing of trailing whitespace in head.S is also removed because
code to do this is already present in setup_boot_command_line().

Signed-off-by: Sven Schnelle 
Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390: add struct tpi_info to struct pt_regs

2021-06-07T15:07:01+00:00

To avoid casting ptrace members, add a union containing
both struct tpi_info and explicit int_code/int_parm members.

Signed-off-by: Sven Schnelle 
Signed-off-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik