When CONFIG_KEXEC_FILE=y but CONFIG_KEXEC is not set:

kernel/kexec_core.o: In function `kimage_free':
kexec_core.c:(.text+0xa0c): undefined reference to `machine_kexec_cleanup'
kernel/kexec_core.o: In function `.L0 ':
kexec_core.c:(.text+0xde8): undefined reference to `machine_crash_shutdown'
kexec_core.c:(.text+0xdf4): undefined reference to `machine_kexec'
kernel/kexec_core.o: In function `.L231':
kexec_core.c:(.text+0xe1c): undefined reference to `riscv_crash_save_regs'
kernel/kexec_core.o: In function `.L0 ':
kexec_core.c:(.text+0x119e): undefined reference to `machine_shutdown'
kernel/kexec_core.o: In function `.L312':
kexec_core.c:(.text+0x11b2): undefined reference to `machine_kexec'
kernel/kexec_file.o: In function `.L0 ':
kexec_file.c:(.text+0xb84): undefined reference to `machine_kexec_prepare'
kernel/kexec_file.o: In function `.L177':
kexec_file.c:(.text+0xc5a): undefined reference to `machine_kexec_prepare'
Makefile:1160: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1

These symbols should depend on CONFIG_KEXEC_CORE rather than CONFIG_KEXEC
when kexec_file has been implemented on RISC-V, like the other archs have
done.

Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220601070204.26882-1-lizhengyu3@huawei.com
Fixes: 6261586e0c91 ("RISC-V: Add kexec_file support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

When CONFIG_MODULES is not set/enabled:

../arch/riscv/kernel/elf_kexec.c:353:9: error: unknown type name 'Elf_Rela'; did you mean 'Elf64_Rela'?
  353 |         Elf_Rela *relas;
      |         ^~~~~~~~
      |         Elf64_Rela

Replace Elf_Rela by Elf64_Rela to avoid relying on CONFIG_MODULES.

Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220601063924.13037-1-lizhengyu3@huawei.com
Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The variable was tracking which feature patches got applied
but that information was never actually used - and thus resulted
in a warning as well.

Drop the variable.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220526205646.258337-2-heiko@sntech.de
Fixes: ff689fd21cb1 ("riscv: add RISC-V Svpbmt extension support")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull bitmap updates from Yury Norov:

 - bitmap: optimize bitmap_weight() usage, from me

 - lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
   Carvalho Chehab

 - include/linux/find: Fix documentation, from Anna-Maria Behnsen

 - bitmap: fix conversion from/to fix-sized arrays, from me

 - bitmap: Fix return values to be unsigned, from Kees Cook

It has been in linux-next for at least a week with no problems.

* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
  nodemask: Fix return values to be unsigned
  bitmap: Fix return values to be unsigned
  KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
  KVM: x86: hyper-v: fix type of valid_bank_mask
  ia64: cleanup remove_siblinginfo()
  drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
  KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
  lib/bitmap: add test for bitmap_{from,to}_arr64
  lib: add bitmap_{from,to}_arr64
  lib/bitmap: extend comment for bitmap_(from,to)_arr32()
  include/linux/find: Fix documentation
  lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
  MAINTAINERS: add cpumask and nodemask files to BITMAP_API
  arch/x86: replace nodes_weight with nodes_empty where appropriate
  mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
  clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
  genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
  irq: mips: replace cpumask_weight with cpumask_empty where appropriate
  drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
  arch/x86: replace cpumask_weight with cpumask_empty where appropriate
  ...

Pull kthread updates from Eric Biederman:
 "This updates init and user mode helper tasks to be ordinary user mode
  tasks.

  Commit 40966e316f86 ("kthread: Ensure struct kthread is present for
  all kthreads") caused init and the user mode helper threads that call
  kernel_execve to have struct kthread allocated for them. This struct
  kthread going away during execve in turned made a use after free of
  struct kthread possible.

  Here, commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for
  init and umh") is enough to fix the use after free and is simple
  enough to be backportable.

  The rest of the changes pass struct kernel_clone_args to clean things
  up and cause the code to make sense.

  In making init and the user mode helpers tasks purely user mode tasks
  I ran into two complications. The function task_tick_numa was
  detecting tasks without an mm by testing for the presence of
  PF_KTHREAD. The initramfs code in populate_initrd_image was using
  flush_delayed_fput to ensuere the closing of all it's file descriptors
  was complete, and flush_delayed_fput does not work in a userspace
  thread.

  I have looked and looked and more complications and in my code review
  I have not found any, and neither has anyone else with the code
  sitting in linux-next"

* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sched: Update task_tick_numa to ignore tasks without an mm
  fork: Stop allowing kthreads to call execve
  fork: Explicitly set PF_KTHREAD
  init: Deal with the init process being a user mode process
  fork: Generalize PF_IO_WORKER handling
  fork: Explicity test for idle tasks in copy_thread
  fork: Pass struct kernel_clone_args into copy_thread
  kthread: Don't allocate kthread_struct for init and umh

Pull more RISC-V updates from Palmer Dabbelt:
 "This is mostly some DT updates, but also a handful of cleanups and
  some fixes. The most user-visible of those are:

   - A device tree for the Sundance Polarberry, along with a handful of
     fixes and clenups to the PolarFire SOC device trees and bindings.

   - The memfd_secret syscall number is now visible to userspace,

   - Some improvements to the vm layout dump, which really should have
     followed shortly after the sv48 patches but I missed"

* tag 'riscv-for-linus-5.19-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move alternative length validation into subsection
  riscv: mm: init: make pt_ops_set_[early|late|fixmap] static
  riscv: move errata/ and kvm/ builds to arch/riscv/Kbuild
  RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSY
  riscv: Wire up memfd_secret in UAPI header
  riscv: Fix irq_work when SMP is disabled
  riscv: Improve virtual kernel memory layout dump
  riscv: Initialize thread pointer before calling C functions
  Documentation: riscv: Add sv48 description to VM layout
  RISC-V: Only default to spinwait on SBI-0.1 and M-mode
  riscv: dts: icicle: sort nodes alphabetically
  riscv: microchip: icicle: readability fixes
  riscv: dts: microchip: add the sundance polarberry
  dt-bindings: riscv: microchip: add polarberry compatible string
  dt-bindings: vendor-prefixes: add Sundance DSP
  riscv: dts: microchip: make the fabric dtsi board specific
  dt-bindings: riscv: microchip: document icicle reference design
  riscv: dts: microchip: remove soc vendor from filenames
  riscv: dts: microchip: move sysctrlr out of soc bus
  riscv: dts: microchip: remove icicle memory clocks

Pull more EFI updates from Ard Biesheuvel:
 "Follow-up tweaks for EFI changes - they mostly address issues
  introduced this merge window, except for Heinrich's patch:

   - fix new DXE service invocations for mixed mode

   - use correct Kconfig symbol when setting PE header flag

   - clean up the drivers/firmware/efi Kconfig dependencies so that
     features that depend on CONFIG_EFI are hidden from the UI when the
     symbol is not enabled.

  Also included is a RISC-V bugfix from Heinrich to avoid read-write
  mappings of read-only firmware regions in the EFI page tables"

* tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: clean up Kconfig dependencies on CONFIG_EFI
  efi/x86: libstub: Make DXE calls mixed mode safe
  efi: x86: Fix config name for setting the NX-compatibility flag in the PE header
  riscv: read-only pages should not be writable

bitmap_empty() is better than bitmap_weight() because it may return
earlier, and improves on readability.

CC: Albert Ou <aou@eecs.berkeley.edu>
CC: Anup Patel <anup@brainfault.org>
CC: Atish Patra <atishp@atishpatra.org>
CC: Jisheng Zhang <jszhang@kernel.org>
CC: Palmer Dabbelt <palmer@dabbelt.com>
CC: Paul Walmsley <paul.walmsley@sifive.com>
CC: Tsukasa OI <research_trasio@irq.a4lg.com>
CC: linux-riscv@lists.infradead.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Commit 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree")
marked IORESOURCE_BUSY for reserved memory, which caused resource map
failed in subsequent operations of related driver, so remove the
IORESOURCE_BUSY flag. In order to prohibit userland mapping reserved
memory, mark IORESOURCE_EXCLUSIVE for it.

The code to reproduce the issue,
dts:
        mem0: memory@a0000000 {
                reg = <0x0 0xa0000000 0 0x1000000>;
                no-map;
        };

        &test {
                status = "okay";
                memory-region = <&mem0>;
        };

code:
        np = of_parse_phandle(pdev->dev.of_node, "memory-region", 0);
        ret = of_address_to_resource(np, 0, &r);
        base = devm_ioremap_resource(&pdev->dev, &r);
        // base = -EBUSY

Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree")
Reported-by: Huaming Jiang <jianghuaming.jhm@alibaba-inc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Co-developed-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220518013428.1338983-1-xianting.tian@linux.alibaba.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Because of the stack canary feature that reads from the current task
structure the stack canary value, the thread pointer register "tp" must
be set before calling any C function from head.S: by chance, setup_vm
and all the functions that it calls does not seem to be part of the
functions where the canary check is done, but in the following commits,
some functions will.

Fixes: f2c9699f65557a31 ("riscv: Add STACKPROTECTOR supported")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>