linux.git/arch/riscv/kernel/setup.c, branch v5.17

RISC-V: Do not use cpumask data structure for hartid bitmap

2022-01-20T17:27:22+00:00

Currently, SBI APIs accept a hartmask that is generated from struct
cpumask. Cpumask data structure can hold upto NR_CPUs value. Thus, it
is not the correct data structure for hartids as it can be higher
than NR_CPUs for platforms with sparse or discontguous hartids.

Remove all association between hartid mask and struct cpumask.

Reviewed-by: Anup Patel  (For Linux RISC-V changes)
Acked-by: Anup Patel  (For KVM RISC-V changes)
Signed-off-by: Atish Patra 
Signed-off-by: Palmer Dabbelt

RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n

2022-01-09T20:13:31+00:00

Use what is currently the SMP=y version of riscv_cpuid_to_hartid_mask()
for both SMP=y and SMP=n to fix a build failure with KVM=m and SMP=n due
to boot_cpu_hartid not being exported.  This also fixes a second bug
where the SMP=n version assumes the sole CPU in the system is in the
incoming mask, which may not hold true in kvm_riscv_vcpu_sbi_ecall() if
the KVM guest VM has multiple vCPUs (on a SMP=n system).

Fixes: 1ef46c231df4 ("RISC-V: Implement new SBI v0.2 extensions")
Reported-by: Adam Borowski 
Reviewed-by: Anup Patel 
Signed-off-by: Sean Christopherson 
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt

memblock: use memblock_free for freeing virtual pointers

2021-11-06T20:30:41+00:00

Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()

The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.

    @@
    identifier vaddr;
    expression size;
    @@
    (
    - memblock_phys_free(__pa(vaddr), size);
    + memblock_free(vaddr, size);
    |
    - memblock_free_ptr(vaddr, size);
    + memblock_free(vaddr, size);
    )

[sfr@canb.auug.org.au: fixup]
  Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au

Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport 
Signed-off-by: Stephen Rothwell 
Cc: Christophe Leroy 
Cc: Juergen Gross 
Cc: Shahab Vahedi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

memblock: rename memblock_free to memblock_phys_free

2021-11-06T20:30:41+00:00

Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().

The callers are updated with the below semantic patch:

    @@
    expression addr;
    expression size;
    @@
    - memblock_free(addr, size);
    + memblock_phys_free(addr, size);

Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport 
Cc: Christophe Leroy 
Cc: Juergen Gross 
Cc: Shahab Vahedi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2021-09-05T18:31:23+00:00

Pull RISC-V updates from Palmer Dabbelt:

 - support PC-relative instructions (auipc and branches) in kprobes

 - support for forced IRQ threading

 - support for the hlt/nohlt kernel command line options, via the
   generic idle loop

 - show the edge/level triggered behavior of interrupts
   in /proc/interrupts

 - a handful of cleanups to our address mapping mechanisms

 - support for allocating gigantic hugepages via CMA

 - support for the undefined behavior sanitizer (UBSAN)

 - a handful of cleanups to the VDSO that allow the kernel to build with
   LLD.

 - support for hugepage migration

* tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
  riscv: add support for hugepage migration
  RISC-V: Fix VDSO build for !MMU
  riscv: use strscpy to replace strlcpy
  riscv: explicitly use symbol offsets for VDSO
  riscv: Enable Undefined Behavior Sanitizer UBSAN
  riscv: Keep the riscv Kconfig selects sorted
  riscv: Support allocating gigantic hugepages using CMA
  riscv: fix the global name pfn_base confliction error
  riscv: Move early fdt mapping creation in its own function
  riscv: Simplify BUILTIN_DTB device tree mapping handling
  riscv: Use __maybe_unused instead of #ifdefs around variable declarations
  riscv: Get rid of map_size parameter to create_kernel_page_table
  riscv: Introduce va_kernel_pa_offset for 32-bit kernel
  riscv: Optimize kernel virtual address conversion macro
  dt-bindings: riscv: add starfive jh7100 bindings
  riscv: Enable GENERIC_IRQ_SHOW_LEVEL
  riscv: Enable idle generic idle loop
  riscv: Allow forced irq threading
  riscv: Implement thread_struct whitelist for hardened usercopy
  riscv: kprobes: implement the branch instructions
  ...

riscv: use strscpy to replace strlcpy

2021-08-26T04:52:47+00:00

The strlcpy should not be used because it doesn't limit the source
length. As linus says, it's a completely useless function if you
can't implicitly trust the source string - but that is almost always
why people think they should use it! All in all the BSD function
will lead some potential bugs.

But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.

Thus, We prefer using strscpy instead of strlcpy.

Signed-off-by: Jason Wang 
Signed-off-by: Palmer Dabbelt

riscv: Fix a number of free'd resources in init_resources()

2021-08-20T17:15:51+00:00

Function init_resources() allocates a boot memory block to hold an array of
resources which it adds to iomem_resource. The array is filled in from its
end and the function then attempts to free any unused memory at the
beginning. The problem is that size of the unused memory is incorrectly
calculated and this can result in releasing memory which is in use by
active resources. Their data then gets corrupted later when the memory is
reused by a different part of the system.

Fix the size of the released memory to correctly match the number of unused
resource entries.

Fixes: ffe0e5261268 ("RISC-V: Improve init_resources()")
Signed-off-by: Petr Pavlu 
Reviewed-by: Sunil V L 
Acked-by: Nick Kossifidis 
Tested-by: Sunil V L 
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt

Merge tag 'riscv-for-linus-5.14-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2021-07-09T17:36:29+00:00

Pull RISC-V updates from Palmer Dabbelt:
 "We have a handful of new features for 5.14:

   - Support for transparent huge pages.

   - Support for generic PCI resources mapping.

   - Support for the mem= kernel parameter.

   - Support for KFENCE.

   - A handful of fixes to avoid W+X mappings in the kernel.

   - Support for VMAP_STACK based overflow detection.

   - An optimized copy_{to,from}_user"

* tag 'riscv-for-linus-5.14-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (37 commits)
  riscv: xip: Fix duplicate included asm/pgtable.h
  riscv: Fix PTDUMP output now BPF region moved back to module region
  riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall
  riscv: add VMAP_STACK overflow detection
  riscv: ptrace: add argn syntax
  riscv: mm: fix build errors caused by mk_pmd()
  riscv: Introduce structure that group all variables regarding kernel mapping
  riscv: Map the kernel with correct permissions the first time
  riscv: Introduce set_kernel_memory helper
  riscv: Enable KFENCE for riscv64
  RISC-V: Use asm-generic for {in,out}{bwlq}
  riscv: add ASID-based tlbflushing methods
  riscv: pass the mm_struct to __sbi_tlb_flush_range
  riscv: Add mem kernel parameter support
  riscv: Simplify xip and !xip kernel address conversion macros
  riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED
  riscv: Only initialize swiotlb when necessary
  riscv: fix typo in init.c
  riscv: Cleanup unused functions
  riscv: mm: Use better bitmap_zalloc()
  ...

riscv: convert to setup_initial_init_mm()

2021-07-08T18:48:21+00:00

Use setup_initial_init_mm() helper to simplify code.

Link: https://lkml.kernel.org/r/20210608083418.137226-13-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang 
Acked-by: Palmer Dabbelt 
Cc: Paul Walmsley 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'riscv-wx-mappings' into for-next

2021-07-01T04:50:32+00:00

This contains both the short-term fix for the W+X boot mappings and the
larger cleanup.

* riscv-wx-mappings:
  riscv: Map the kernel with correct permissions the first time
  riscv: Introduce set_kernel_memory helper
  riscv: Simplify xip and !xip kernel address conversion macros
  riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED
  riscv: mm: Fix W+X mappings at boot