linux.git/arch/riscv/kernel/entry.S, branch v5.11

riscv: Trace irq on only interrupt is enabled

2021-01-13T04:16:35+00:00

We should call irq trace only if interrupt is going to be enabled during
excecption handling. Otherwise, it results in following warning during
boot with lock debugging enabled.

[    0.000000] ------------[ cut here ]------------
[    0.000000] DEBUG_LOCKS_WARN_ON(early_boot_irqs_disabled)
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:4085 lockdep_hardirqs_on_prepare+0x22a/0x22e
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #548
[    0.000000] epc: c005d5d4 ra : c005d5d4 sp : c1c01e80
[    0.000000]  gp : c1d456e0 tp : c1c0a980 t0 : 00000000
[    0.000000]  t1 : ffffffff t2 : 00000000 s0 : c1c01ea0
[    0.000000]  s1 : c100f360 a0 : 0000002d a1 : c00666ee
[    0.000000]  a2 : 00000000 a3 : 00000000 a4 : 00000000
[    0.000000]  a5 : 00000000 a6 : c1c6b390 a7 : 3ffff00e
[    0.000000]  s2 : c2384fe8 s3 : 00000000 s4 : 00000001
[    0.000000]  s5 : c1c0a980 s6 : c1d48000 s7 : c1613b4c
[    0.000000]  s8 : 00000fff s9 : 80000200 s10: c1613b40
[    0.000000]  s11: 00000000 t3 : 00000000 t4 : 00000000
[    0.000000]  t5 : 00000001 t6 : 00000000

Fixes: 3c4697982982 ("riscv:Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT")

Signed-off-by: Atish Patra 
Signed-off-by: Palmer Dabbelt

riscv: Enable interrupts during syscalls with M-Mode

2021-01-08T02:04:25+00:00

When running is M-Mode (no MMU config), MPIE does not get set. This
results in all syscalls being executed with interrupts disabled as
handle_exception never sets SR_IE as it always sees SR_PIE being
cleared. Fix this by always force enabling interrupts in
handle_syscall when CONFIG_RISCV_M_MODE is enabled.

Signed-off-by: Damien Le Moal 
Reviewed-by: Palmer Dabbelt 
Signed-off-by: Palmer Dabbelt

riscv: return -ENOSYS for syscall -1

2021-01-08T02:01:34+00:00

Properly return -ENOSYS for syscall -1 instead of leaving the return value
uninitialized.  This fixes the strace teststuite.

Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Schwab 
Reviewed-by: Tycho Andersen 
Signed-off-by: Palmer Dabbelt

riscv: Cleanup unnecessary define in asm-offset.c

2020-07-30T18:37:44+00:00

 - TASK_THREAD_SP is duplicated define
 - TASK_STACK is no use at all
 - Don't worry about thread_info's offset in task_struct, have
   a look on comment in include/linux/sched.h:

struct task_struct {
	/*
	 * For reasons of header soup (see current_thread_info()), this
	 * must be the first element of task_struct.
	 */
	struct thread_info		thread_info;

Signed-off-by: Guo Ren 
Signed-off-by: Palmer Dabbelt

riscv: Enable context tracking

2020-07-30T18:37:34+00:00

This patch implements and enables context tracking for riscv (which is a
prerequisite for CONFIG_NO_HZ_FULL support)

It adds checking for previous state in the entry that all excepttions and
interrupts goes to and calls context_tracking_user_exit() if it comes from
user space. It also calls context_tracking_user_enter() if it will return
to user space before restore_all.

This patch is tested with the dynticks-testing testcase in
qemu-system-riscv64 virt machine and Unleashed board.
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/dynticks-testing.git

We can see the log here. The tick got mostly stopped during the execution
of the user loop.

                        _-----=> irqs-off
                       / _----=> need-resched
                      | / _---=> hardirq/softirq
                      || / _--=> preempt-depth
                      ||| /     delay
     TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
        | |       |   ||||       |         |
   -0     [001] d..2   604.183512: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=taskset next_pid=273 next_prio=120
user_loop-273   [001] d.h1   604.184788: hrtimer_expire_entry: hrtimer=000000002eda5fab function=tick_sched_timer now=604176096300
user_loop-273   [001] d.s2   604.184897: workqueue_queue_work: work struct=00000000383402c2 function=vmstat_update workqueue=00000000f36d35d4 req_cpu=1 cpu=1
user_loop-273   [001] dns2   604.185039: tick_stop: success=0 dependency=SCHED
user_loop-273   [001] dn.1   604.185103: tick_stop: success=0 dependency=SCHED
user_loop-273   [001] d..2   604.185154: sched_switch: prev_comm=taskset prev_pid=273 prev_prio=120 prev_state=R+ ==> next_comm=kworker/1:1 next_pid=46 next_prio=120
    <...>-46    [001] ....   604.185194: workqueue_execute_start: work struct 00000000383402c2: function vmstat_update
    <...>-46    [001] d..2   604.185266: sched_switch: prev_comm=kworker/1:1 prev_pid=46 prev_prio=120 prev_state=I ==> next_comm=taskset next_pid=273 next_prio=120
user_loop-273   [001] d.h1   604.188812: hrtimer_expire_entry: hrtimer=000000002eda5fab function=tick_sched_timer now=604180133400
user_loop-273   [001] d..1   604.189050: tick_stop: success=1 dependency=NONE
user_loop-273   [001] d..2   614.251386: sched_switch: prev_comm=user_loop prev_pid=273 prev_prio=120 prev_state=X ==> next_comm=swapper/1 next_pid=0 next_prio=120
   -0     [001] d..2   614.315391: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=taskset next_pid=276 next_prio=120

Signed-off-by: Greentime Hu 
Signed-off-by: Palmer Dabbelt

riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT

2020-07-30T18:37:32+00:00

Lockdep is needed by proving the spinlocks and rwlocks. To suupport
it, we need fixup TRACE_IRQFLAGS_SUPPORT in kernel/entry.S. This
patch follow Documentation/irqflags-tracing.txt.

Signed-off-by: Guo Ren 
Signed-off-by: Palmer Dabbelt

RISC-V: Remove do_IRQ() function

2020-06-10T02:11:24+00:00

The only thing do_IRQ() does is call handle_arch_irq function
pointer. We can very well call handle_arch_irq function pointer
directly from assembly and remove do_IRQ() function hence this
patch.

Signed-off-by: Anup Patel 
Reviewed-by: Atish Patra 
Signed-off-by: Palmer Dabbelt

Merge tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2020-04-09T17:51:30+00:00

Pull RISC-V updates from Palmer Dabbelt:
 "This contains a handful of new features:

   - Partial support for the Kendryte K210.

     There are still a few outstanding issues that I have patches for,
     but I don't actually have a board to test them so they're not
     included yet.

   - SBI v0.2 support.

   - Fixes to support for building with LLVM-based toolchains. The
     resulting images are known not to boot yet.

  I don't anticipate a part two, but I'll probably have something early
  in the RCs to finish up the K210 support"

* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
  riscv: create a loader.bin boot image for Kendryte SoC
  riscv: Kendryte K210 default config
  riscv: Add Kendryte K210 device tree
  riscv: Select required drivers for Kendryte SOC
  riscv: Add Kendryte K210 SoC support
  riscv: Add SOC early init support
  riscv: Unaligned load/store handling for M_MODE
  RISC-V: Support cpu hotplug
  RISC-V: Add supported for ordered booting method using HSM
  RISC-V: Add SBI HSM extension definitions
  RISC-V: Export SBI error to linux error mapping function
  RISC-V: Add cpu_ops and modify default booting method
  RISC-V: Move relocate and few other functions out of __init
  RISC-V: Implement new SBI v0.2 extensions
  RISC-V: Introduce a new config for SBI v0.1
  RISC-V: Add SBI v0.2 extension definitions
  RISC-V: Add basic support for SBI v0.2
  RISC-V: Mark existing SBI as 0.1 SBI.
  riscv: Use macro definition instead of magic number
  riscv: Add support to dump the kernel page tables
  ...

riscv: fix seccomp reject syscall code path

2020-03-05T21:58:15+00:00

If secure_computing() rejected a system call, we were previously setting
the system call number to -1, to indicate to later code that the syscall
failed. However, if something (e.g. a user notification) was sleeping, and
received a signal, we may set a0 to -ERESTARTSYS and re-try the system call
again.

In this case, seccomp "denies" the syscall (because of the signal), and we
would set a7 to -1, thus losing the value of the system call we want to
restart.

Instead, let's return -1 from do_syscall_trace_enter() to indicate that the
syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS
or whatever.

This commit fixes the user_notification_signal seccomp selftest on riscv to
no longer hang. That test expects the system call to be re-issued after the
signal, and it wasn't due to the above bug. Now that it is, everything
works normally.

Note that in the ptrace (tracer) case, the tracer can set the register
values to whatever they want, so we still need to keep the code that
handles out-of-bounds syscalls. However, we can drop the comment.

We can also drop syscall_set_nr(), since it is no longer used anywhere, and
the code that re-loads the value in a7 because of it.

Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/

Reported-by: David Abdurachmanov 
Signed-off-by: Tycho Andersen 
Reviewed-by: Kees Cook 
Signed-off-by: Palmer Dabbelt

RISC-V: Inline the assembly register save/restore macros

2020-03-03T18:33:21+00:00

These are only used once, and when reading the code I've always found them to
be more of a headache than a benefit.  While they were never worth removing
before, LLVM's integrated assembler doesn't support LOCAL so rather that trying
to figure out how to refactor the macros it seems saner to just inline them.

Reviewed-by: Nick Desaulniers 
Signed-off-by: Palmer Dabbelt