linux.git/arch/riscv/kernel/Makefile, branch v6.12 Linux kernel source tree riscv: Do not use fortify in early code 2024-10-25T13:18:36+00:00 Alexandre Ghiti alexghiti@rivosinc.com 2024-10-09T07:27:49+00:00 afedc3126e11ff1404b32e538657b68022e933ca Early code designates the code executed when the MMU is not yet enabled, and this comes with some limitations (see Documentation/arch/riscv/boot.rst, section "Pre-MMU execution"). FORTIFY_SOURCE must be disabled then since it can trigger kernel panics as reported in [1]. Reported-by: Jason Montleon <jmontleo@redhat.com> Closes: https://lore.kernel.org/linux-riscv/CAJD_bPJes4QhmXY5f63GHV9B9HFkSCoaZjk-qCT2NGS7Q9HODg@mail.gmail.com/ [1] Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head") Fixes: 26e7aacb83df ("riscv: Allow to downgrade paging mode from the command line") Cc: stable@vger.kernel.org Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20241009072749.45006-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 
Early code designates the code executed when the MMU is not yet enabled,
and this comes with some limitations (see
Documentation/arch/riscv/boot.rst, section "Pre-MMU execution").

FORTIFY_SOURCE must be disabled then since it can trigger kernel panics
as reported in [1].

Reported-by: Jason Montleon <jmontleo@redhat.com>
Closes: https://lore.kernel.org/linux-riscv/CAJD_bPJes4QhmXY5f63GHV9B9HFkSCoaZjk-qCT2NGS7Q9HODg@mail.gmail.com/ [1]
Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head")
Fixes: 26e7aacb83df ("riscv: Allow to downgrade paging mode from the command line")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241009072749.45006-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
riscv: Fix RISCV_ALTERNATIVE_EARLY 2024-09-03T14:57:55+00:00 Alexandre Ghiti alexghiti@rivosinc.com 2024-08-29T16:50:48+00:00 1ff95eb2bebda50c4c5406caaf201e0fcb24cc8f RISCV_ALTERNATIVE_EARLY will issue sbi_ecall() very early in the boot process, before the first memory mapping is setup so we can't have any instrumentation happening here. In addition, when the kernel is relocatable, we must also not issue any relocation this early since they would have been patched virtually only. So, instead of disabling instrumentation for the whole kernel/sbi.c file and compiling it with -fno-pie, simply move __sbi_ecall() and __sbi_base_ecall() into their own file where this is fixed. Reported-by: Conor Dooley <conor.dooley@microchip.com> Closes: https://lore.kernel.org/linux-riscv/20240813-pony-truck-3e7a83e9759e@spud/ Reported-by: syzbot+cfbcb82adf6d7279fd35@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-riscv/00000000000065062c061fcec37b@google.com/ Fixes: 1745cfafebdf ("riscv: don't use global static vars to store alternative data") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240829165048.49756-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 
RISCV_ALTERNATIVE_EARLY will issue sbi_ecall() very early in the boot
process, before the first memory mapping is setup so we can't have any
instrumentation happening here.

In addition, when the kernel is relocatable, we must also not issue any
relocation this early since they would have been patched virtually only.

So, instead of disabling instrumentation for the whole kernel/sbi.c file
and compiling it with -fno-pie, simply move __sbi_ecall() and
__sbi_base_ecall() into their own file where this is fixed.

Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/linux-riscv/20240813-pony-truck-3e7a83e9759e@spud/
Reported-by: syzbot+cfbcb82adf6d7279fd35@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-riscv/00000000000065062c061fcec37b@google.com/
Fixes: 1745cfafebdf ("riscv: don't use global static vars to store alternative data")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240829165048.49756-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Merge patch series "riscv: Separate vendor extensions from standard extensions" 2024-07-22T22:37:01+00:00 Palmer Dabbelt palmer@rivosinc.com 2024-07-22T22:37:01+00:00 b9a603da42c816af9eeb8f5084ba815353e9b22b Charlie Jenkins <charlie@rivosinc.com> says: All extensions, both standard and vendor, live in one struct "riscv_isa_ext". There is currently one vendor extension, xandespmu, but it is likely that more vendor extensions will be added to the kernel in the future. As more vendor extensions (and standard extensions) are added, riscv_isa_ext will become more bloated with a mix of vendor and standard extensions. This also allows each vendor to be conditionally enabled through Kconfig. * b4-shazam-merge: riscv: cpufeature: Extract common elements from extension checking riscv: Introduce vendor variants of extension helpers riscv: Add vendor extensions to /proc/cpuinfo riscv: Extend cpufeature.c to detect vendor extensions Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-0-0af7587bbec0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 
Charlie Jenkins <charlie@rivosinc.com> says:

All extensions, both standard and vendor, live in one struct
"riscv_isa_ext". There is currently one vendor extension, xandespmu, but
it is likely that more vendor extensions will be added to the kernel in
the future. As more vendor extensions (and standard extensions) are
added, riscv_isa_ext will become more bloated with a mix of vendor and
standard extensions.

This also allows each vendor to be conditionally enabled through
Kconfig.

* b4-shazam-merge:
  riscv: cpufeature: Extract common elements from extension checking
  riscv: Introduce vendor variants of extension helpers
  riscv: Add vendor extensions to /proc/cpuinfo
  riscv: Extend cpufeature.c to detect vendor extensions

Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-0-0af7587bbec0@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
riscv: Extend cpufeature.c to detect vendor extensions 2024-07-22T22:36:54+00:00 Charlie Jenkins charlie@rivosinc.com 2024-07-19T16:15:18+00:00 23c996fc2bc1978a02c64eddb90b4ab5d309c8df Instead of grouping all vendor extensions into the same riscv_isa_ext that standard instructions use, create a struct "riscv_isa_vendor_ext_data_list" that allows each vendor to maintain their vendor extensions independently of the standard extensions. xandespmu is currently the only vendor extension so that is the only extension that is affected by this change. An additional benefit of this is that the extensions of each vendor can be conditionally enabled. A config RISCV_ISA_VENDOR_EXT_ANDES has been added to allow for that. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andy Chiu <andy.chiu@sifive.com> Tested-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com> Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-1-0af7587bbec0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 
Instead of grouping all vendor extensions into the same riscv_isa_ext
that standard instructions use, create a struct
"riscv_isa_vendor_ext_data_list" that allows each vendor to maintain
their vendor extensions independently of the standard extensions.
xandespmu is currently the only vendor extension so that is the only
extension that is affected by this change.

An additional benefit of this is that the extensions of each vendor can
be conditionally enabled. A config RISCV_ISA_VENDOR_EXT_ANDES has been
added to allow for that.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-1-0af7587bbec0@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI: RISCV: Add NUMA support based on SRAT and SLIT 2024-07-22T14:13:06+00:00 Haibo Xu haibo1.xu@intel.com 2024-06-13T08:54:33+00:00 eabd9db64ea8ba64d2a0b1d70da38e1a95dcd08b Add acpi_numa.c file to enable parse NUMA information from ACPI SRAT and SLIT tables. SRAT table provide CPUs(Hart) and memory nodes to proximity domain mapping, while SLIT table provide the distance metrics between proximity domains. Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/65dbad1fda08a32922c44886e4581e49b4a2fecc.1718268003.git.haibo1.xu@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 
Add acpi_numa.c file to enable parse NUMA information from
ACPI SRAT and SLIT tables. SRAT table provide CPUs(Hart) and
memory nodes to proximity domain mapping, while SLIT table
provide the distance metrics between proximity domains.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/65dbad1fda08a32922c44886e4581e49b4a2fecc.1718268003.git.haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
riscv: add support for kernel-mode FPU 2024-05-19T21:36:19+00:00 Samuel Holland samuel.holland@sifive.com 2024-03-29T07:18:26+00:00 77acc6b55ae46f52bfa4eca52c9fe627f5c3ba3f This is motivated by the amdgpu DRM driver, which needs floating-point code to support recent hardware. That code is not performance-critical, so only provide a minimal non-preemptible implementation for now. Support is limited to riscv64 because riscv32 requires runtime (libgcc) assistance to convert between doubles and 64-bit integers. Link: https://lkml.kernel.org/r/20240329072441.591471-12-samuel.holland@sifive.com Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: WANG Xuerui <git@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
This is motivated by the amdgpu DRM driver, which needs floating-point
code to support recent hardware.  That code is not performance-critical,
so only provide a minimal non-preemptible implementation for now.

Support is limited to riscv64 because riscv32 requires runtime (libgcc)
assistance to convert between doubles and 64-bit integers.

Link: https://lkml.kernel.org/r/20240329072441.591471-12-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com> 
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Merge tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux 2024-03-22T17:41:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-22T17:41:13+00:00 c150b809f7de2afdd3fb5a9adff2a9a68d7331ce Pull RISC-V updates from Palmer Dabbelt: - Support for various vector-accelerated crypto routines - Hibernation is now enabled for portable kernel builds - mmap_rnd_bits_max is larger on systems with larger VAs - Support for fast GUP - Support for membarrier-based instruction cache synchronization - Support for the Andes hart-level interrupt controller and PMU - Some cleanups around unaligned access speed probing and Kconfig settings - Support for ACPI LPI and CPPC - Various cleanus related to barriers - A handful of fixes * tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits) riscv: Fix syscall wrapper for >word-size arguments crypto: riscv - add vector crypto accelerated AES-CBC-CTS crypto: riscv - parallelize AES-CBC decryption riscv: Only flush the mm icache when setting an exec pte riscv: Use kcalloc() instead of kzalloc() riscv/barrier: Add missing space after ',' riscv/barrier: Consolidate fence definitions riscv/barrier: Define RISCV_FULL_BARRIER riscv/barrier: Define __{mb,rmb,wmb} RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ cpufreq: Move CPPC configs to common Kconfig and add RISC-V ACPI: RISC-V: Add CPPC driver ACPI: Enable ACPI_PROCESSOR for RISC-V ACPI: RISC-V: Add LPI driver cpuidle: RISC-V: Move few functions to arch/riscv riscv: Introduce set_compat_task() in asm/compat.h riscv: Introduce is_compat_thread() into compat.h riscv: add compile-time test into is_compat_task() riscv: Replace direct thread flag check with is_compat_task() riscv: Improve arch_get_mmap_end() macro ... 
Pull RISC-V updates from Palmer Dabbelt:

 - Support for various vector-accelerated crypto routines

 - Hibernation is now enabled for portable kernel builds

 - mmap_rnd_bits_max is larger on systems with larger VAs

 - Support for fast GUP

 - Support for membarrier-based instruction cache synchronization

 - Support for the Andes hart-level interrupt controller and PMU

 - Some cleanups around unaligned access speed probing and Kconfig
   settings

 - Support for ACPI LPI and CPPC

 - Various cleanus related to barriers

 - A handful of fixes

* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
  riscv: Fix syscall wrapper for >word-size arguments
  crypto: riscv - add vector crypto accelerated AES-CBC-CTS
  crypto: riscv - parallelize AES-CBC decryption
  riscv: Only flush the mm icache when setting an exec pte
  riscv: Use kcalloc() instead of kzalloc()
  riscv/barrier: Add missing space after ','
  riscv/barrier: Consolidate fence definitions
  riscv/barrier: Define RISCV_FULL_BARRIER
  riscv/barrier: Define __{mb,rmb,wmb}
  RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
  cpufreq: Move CPPC configs to common Kconfig and add RISC-V
  ACPI: RISC-V: Add CPPC driver
  ACPI: Enable ACPI_PROCESSOR for RISC-V
  ACPI: RISC-V: Add LPI driver
  cpuidle: RISC-V: Move few functions to arch/riscv
  riscv: Introduce set_compat_task() in asm/compat.h
  riscv: Introduce is_compat_thread() into compat.h
  riscv: add compile-time test into is_compat_task()
  riscv: Replace direct thread flag check with is_compat_task()
  riscv: Improve arch_get_mmap_end() macro
  ...
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2024-03-15T00:43:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-15T00:43:30+00:00 902861e34c401696ed9ad17a54c8790e7e8e3069 Pull MM updates from Andrew Morton: - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames from hotplugged memory rather than only from main memory. Series "implement "memmap on memory" feature on s390". - More folio conversions from Matthew Wilcox in the series "Convert memcontrol charge moving to use folios" "mm: convert mm counter to take a folio" - Chengming Zhou has optimized zswap's rbtree locking, providing significant reductions in system time and modest but measurable reductions in overall runtimes. The series is "mm/zswap: optimize the scalability of zswap rb-tree". - Chengming Zhou has also provided the series "mm/zswap: optimize zswap lru list" which provides measurable runtime benefits in some swap-intensive situations. - And Chengming Zhou further optimizes zswap in the series "mm/zswap: optimize for dynamic zswap_pools". Measured improvements are modest. - zswap cleanups and simplifications from Yosry Ahmed in the series "mm: zswap: simplify zswap_swapoff()". - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has contributed several DAX cleanups as well as adding a sysfs tunable to control the memmap_on_memory setting when the dax device is hotplugged as system memory. - Johannes Weiner has added the large series "mm: zswap: cleanups", which does that. - More DAMON work from SeongJae Park in the series "mm/damon: make DAMON debugfs interface deprecation unignorable" "selftests/damon: add more tests for core functionalities and corner cases" "Docs/mm/damon: misc readability improvements" "mm/damon: let DAMOS feeds and tame/auto-tune itself" - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs extension" Rakie Kim has developed a new mempolicy interleaving policy wherein we allocate memory across nodes in a weighted fashion rather than uniformly. This is beneficial in heterogeneous memory environments appearing with CXL. - Christophe Leroy has contributed some cleanup and consolidation work against the ARM pagetable dumping code in the series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute". - Luis Chamberlain has added some additional xarray selftesting in the series "test_xarray: advanced API multi-index tests". - Muhammad Usama Anjum has reworked the selftest code to make its human-readable output conform to the TAP ("Test Anything Protocol") format. Amongst other things, this opens up the use of third-party tools to parse and process out selftesting results. - Ryan Roberts has added fork()-time PTE batching of THP ptes in the series "mm/memory: optimize fork() with PTE-mapped THP". Mainly targeted at arm64, this significantly speeds up fork() when the process has a large number of pte-mapped folios. - David Hildenbrand also gets in on the THP pte batching game in his series "mm/memory: optimize unmap/zap with PTE-mapped THP". It implements batching during munmap() and other pte teardown situations. The microbenchmark improvements are nice. - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte mappings"). Kernel build times on arm64 improved nicely. Ryan's series "Address some contpte nits" provides some followup work. - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has fixed an obscure hugetlb race which was causing unnecessary page faults. He has also added a reproducer under the selftest code. - In the series "selftests/mm: Output cleanups for the compaction test", Mark Brown did what the title claims. - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring". - Even more zswap material from Nhat Pham. The series "fix and extend zswap kselftests" does as claimed. - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in our handling of DAX on archiecctures which have virtually aliasing data caches. The arm architecture is the main beneficiary. - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic improvements in worst-case mmap_lock hold times during certain userfaultfd operations. - Some page_owner enhancements and maintenance work from Oscar Salvador in his series "page_owner: print stacks and their outstanding allocations" "page_owner: Fixup and cleanup" - Uladzislau Rezki has contributed some vmalloc scalability improvements in his series "Mitigate a vmap lock contention". It realizes a 12x improvement for a certain microbenchmark. - Some kexec/crash cleanup work from Baoquan He in the series "Split crash out from kexec and clean up related config items". - Some zsmalloc maintenance work from Chengming Zhou in the series "mm/zsmalloc: fix and optimize objects/page migration" "mm/zsmalloc: some cleanup for get/set_zspage_mapping()" - Zi Yan has taught the MM to perform compaction on folios larger than order=0. This a step along the path to implementaton of the merging of large anonymous folios. The series is named "Enable >0 order folio memory compaction". - Christoph Hellwig has done quite a lot of cleanup work in the pagecache writeback code in his series "convert write_cache_pages() to an iterator". - Some modest hugetlb cleanups and speedups in Vishal Moola's series "Handle hugetlb faults under the VMA lock". - Zi Yan has changed the page splitting code so we can split huge pages into sizes other than order-0 to better utilize large folios. The series is named "Split a folio to any lower order folios". - David Hildenbrand has contributed the series "mm: remove total_mapcount()", a cleanup. - Matthew Wilcox has sought to improve the performance of bulk memory freeing in his series "Rearrange batched folio freeing". - Gang Li's series "hugetlb: parallelize hugetlb page init on boot" provides large improvements in bootup times on large machines which are configured to use large numbers of hugetlb pages. - Matthew Wilcox's series "PageFlags cleanups" does that. - Qi Zheng's series "minor fixes and supplement for ptdesc" does that also. S390 is affected. - Cleanups to our pagemap utility functions from Peter Xu in his series "mm/treewide: Replace pXd_large() with pXd_leaf()". - Nico Pache has fixed a few things with our hugepage selftests in his series "selftests/mm: Improve Hugepage Test Handling in MM Selftests". - Also, of course, many singleton patches to many things. Please see the individual changelogs for details. * tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits) mm/zswap: remove the memcpy if acomp is not sleepable crypto: introduce: acomp_is_async to expose if comp drivers might sleep memtest: use {READ,WRITE}_ONCE in memory scanning mm: prohibit the last subpage from reusing the entire large folio mm: recover pud_leaf() definitions in nopmd case selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements selftests/mm: skip uffd hugetlb tests with insufficient hugepages selftests/mm: dont fail testsuite due to a lack of hugepages mm/huge_memory: skip invalid debugfs new_order input for folio split mm/huge_memory: check new folio order when split a folio mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure mm: add an explicit smp_wmb() to UFFDIO_CONTINUE mm: fix list corruption in put_pages_list mm: remove folio from deferred split list before uncharging it filemap: avoid unnecessary major faults in filemap_fault() mm,page_owner: drop unnecessary check mm,page_owner: check for null stack_record before bumping its refcount mm: swap: fix race between free_swap_and_cache() and swapoff() mm/treewide: align up pXd_leaf() retval across archs mm/treewide: drop pXd_large() ... 
Pull MM updates from Andrew Morton:

 - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
   from hotplugged memory rather than only from main memory. Series
   "implement "memmap on memory" feature on s390".

 - More folio conversions from Matthew Wilcox in the series

	"Convert memcontrol charge moving to use folios"
	"mm: convert mm counter to take a folio"

 - Chengming Zhou has optimized zswap's rbtree locking, providing
   significant reductions in system time and modest but measurable
   reductions in overall runtimes. The series is "mm/zswap: optimize the
   scalability of zswap rb-tree".

 - Chengming Zhou has also provided the series "mm/zswap: optimize zswap
   lru list" which provides measurable runtime benefits in some
   swap-intensive situations.

 - And Chengming Zhou further optimizes zswap in the series "mm/zswap:
   optimize for dynamic zswap_pools". Measured improvements are modest.

 - zswap cleanups and simplifications from Yosry Ahmed in the series
   "mm: zswap: simplify zswap_swapoff()".

 - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
   contributed several DAX cleanups as well as adding a sysfs tunable to
   control the memmap_on_memory setting when the dax device is
   hotplugged as system memory.

 - Johannes Weiner has added the large series "mm: zswap: cleanups",
   which does that.

 - More DAMON work from SeongJae Park in the series

	"mm/damon: make DAMON debugfs interface deprecation unignorable"
	"selftests/damon: add more tests for core functionalities and corner cases"
	"Docs/mm/damon: misc readability improvements"
	"mm/damon: let DAMOS feeds and tame/auto-tune itself"

 - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
   extension" Rakie Kim has developed a new mempolicy interleaving
   policy wherein we allocate memory across nodes in a weighted fashion
   rather than uniformly. This is beneficial in heterogeneous memory
   environments appearing with CXL.

 - Christophe Leroy has contributed some cleanup and consolidation work
   against the ARM pagetable dumping code in the series "mm: ptdump:
   Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".

 - Luis Chamberlain has added some additional xarray selftesting in the
   series "test_xarray: advanced API multi-index tests".

 - Muhammad Usama Anjum has reworked the selftest code to make its
   human-readable output conform to the TAP ("Test Anything Protocol")
   format. Amongst other things, this opens up the use of third-party
   tools to parse and process out selftesting results.

 - Ryan Roberts has added fork()-time PTE batching of THP ptes in the
   series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
   targeted at arm64, this significantly speeds up fork() when the
   process has a large number of pte-mapped folios.

 - David Hildenbrand also gets in on the THP pte batching game in his
   series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
   implements batching during munmap() and other pte teardown
   situations. The microbenchmark improvements are nice.

 - And in the series "Transparent Contiguous PTEs for User Mappings"
   Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
   mappings"). Kernel build times on arm64 improved nicely. Ryan's
   series "Address some contpte nits" provides some followup work.

 - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
   fixed an obscure hugetlb race which was causing unnecessary page
   faults. He has also added a reproducer under the selftest code.

 - In the series "selftests/mm: Output cleanups for the compaction
   test", Mark Brown did what the title claims.

 - Kinsey Ho has added the series "mm/mglru: code cleanup and
   refactoring".

 - Even more zswap material from Nhat Pham. The series "fix and extend
   zswap kselftests" does as claimed.

 - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
   regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
   in our handling of DAX on archiecctures which have virtually aliasing
   data caches. The arm architecture is the main beneficiary.

 - Lokesh Gidra's series "per-vma locks in userfaultfd" provides
   dramatic improvements in worst-case mmap_lock hold times during
   certain userfaultfd operations.

 - Some page_owner enhancements and maintenance work from Oscar Salvador
   in his series

	"page_owner: print stacks and their outstanding allocations"
	"page_owner: Fixup and cleanup"

 - Uladzislau Rezki has contributed some vmalloc scalability
   improvements in his series "Mitigate a vmap lock contention". It
   realizes a 12x improvement for a certain microbenchmark.

 - Some kexec/crash cleanup work from Baoquan He in the series "Split
   crash out from kexec and clean up related config items".

 - Some zsmalloc maintenance work from Chengming Zhou in the series

	"mm/zsmalloc: fix and optimize objects/page migration"
	"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"

 - Zi Yan has taught the MM to perform compaction on folios larger than
   order=0. This a step along the path to implementaton of the merging
   of large anonymous folios. The series is named "Enable >0 order folio
   memory compaction".

 - Christoph Hellwig has done quite a lot of cleanup work in the
   pagecache writeback code in his series "convert write_cache_pages()
   to an iterator".

 - Some modest hugetlb cleanups and speedups in Vishal Moola's series
   "Handle hugetlb faults under the VMA lock".

 - Zi Yan has changed the page splitting code so we can split huge pages
   into sizes other than order-0 to better utilize large folios. The
   series is named "Split a folio to any lower order folios".

 - David Hildenbrand has contributed the series "mm: remove
   total_mapcount()", a cleanup.

 - Matthew Wilcox has sought to improve the performance of bulk memory
   freeing in his series "Rearrange batched folio freeing".

 - Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
   provides large improvements in bootup times on large machines which
   are configured to use large numbers of hugetlb pages.

 - Matthew Wilcox's series "PageFlags cleanups" does that.

 - Qi Zheng's series "minor fixes and supplement for ptdesc" does that
   also. S390 is affected.

 - Cleanups to our pagemap utility functions from Peter Xu in his series
   "mm/treewide: Replace pXd_large() with pXd_leaf()".

 - Nico Pache has fixed a few things with our hugepage selftests in his
   series "selftests/mm: Improve Hugepage Test Handling in MM
   Selftests".

 - Also, of course, many singleton patches to many things. Please see
   the individual changelogs for details.

* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
  mm/zswap: remove the memcpy if acomp is not sleepable
  crypto: introduce: acomp_is_async to expose if comp drivers might sleep
  memtest: use {READ,WRITE}_ONCE in memory scanning
  mm: prohibit the last subpage from reusing the entire large folio
  mm: recover pud_leaf() definitions in nopmd case
  selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
  selftests/mm: skip uffd hugetlb tests with insufficient hugepages
  selftests/mm: dont fail testsuite due to a lack of hugepages
  mm/huge_memory: skip invalid debugfs new_order input for folio split
  mm/huge_memory: check new folio order when split a folio
  mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
  mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
  mm: fix list corruption in put_pages_list
  mm: remove folio from deferred split list before uncharging it
  filemap: avoid unnecessary major faults in filemap_fault()
  mm,page_owner: drop unnecessary check
  mm,page_owner: check for null stack_record before bumping its refcount
  mm: swap: fix race between free_swap_and_cache() and swapoff()
  mm/treewide: align up pXd_leaf() retval across archs
  mm/treewide: drop pXd_large()
  ...
riscv: Set unaligned access speed at compile time 2024-03-13T14:30:31+00:00 Charlie Jenkins charlie@rivosinc.com 2024-03-08T18:25:58+00:00 f413aae96cda059635910c462ede0a8f0385897c Introduce Kconfig options to set the kernel unaligned access support. These options provide a non-portable alternative to the runtime unaligned access probe. To support this, the unaligned access probing code is moved into it's own file and gated behind a new RISCV_PROBE_UNALIGNED_ACCESS_SUPPORT option. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-4-a388770ba0ce@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 
Introduce Kconfig options to set the kernel unaligned access support.
These options provide a non-portable alternative to the runtime
unaligned access probe.

To support this, the unaligned access probing code is moved into it's
own file and gated behind a new RISCV_PROBE_UNALIGNED_ACCESS_SUPPORT
option.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-4-a388770ba0ce@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
crash: split vmcoreinfo exporting code out from crash_core.c 2024-02-24T01:48:22+00:00 Baoquan He bhe@redhat.com 2024-01-24T05:12:42+00:00 443cbaf9e2fdbef7d7cae457434a6cb8a679441b Now move the relevant codes into separate files: kernel/crash_reserve.c, include/linux/crash_reserve.h. And add config item CRASH_RESERVE to control its enabling. And also update the old ifdeffery of CONFIG_CRASH_CORE, including of <linux/crash_core.h> and config item dependency on CRASH_CORE accordingly. And also do renaming as follows: - arch/xxx/kernel/{crash_core.c => vmcore_info.c} because they are only related to vmcoreinfo exporting on x86, arm64, riscv. And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to decide if build in crash_core.c. [yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c] Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.

And add config item CRASH_RESERVE to control its enabling.

And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.

And also do renaming as follows:
 - arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.

And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.

[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
  Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>