This series adds RISC-V CPU Idle support using SBI HSM suspend function.
The RISC-V SBI CPU idle driver added by this series is highly inspired
from the ARM PSCI CPU idle driver.

Special thanks Sandeep Tripathy for providing early feeback on SBI HSM
support in all above projects (RISC-V SBI specification, OpenSBI, and
Linux RISC-V).

* palmer/riscv-idle:
  RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine
  dt-bindings: Add common bindings for ARM and RISC-V idle states
  cpuidle: Add RISC-V SBI CPU idle driver
  cpuidle: Factor-out power domain related code from PSCI domain driver
  RISC-V: Add SBI HSM suspend related defines
  RISC-V: Add arch functions for non-retentive suspend entry/exit
  RISC-V: Rename relocate() and make it global
  RISC-V: Enable CPU_IDLE drivers

Pull RISC-V updates from Palmer Dabbelt:

 - Support for Sv57-based virtual memory.

 - Various improvements for the MicroChip PolarFire SOC and the
   associated Icicle dev board, which should allow upstream kernels to
   boot without any additional modifications.

 - An improved memmove() implementation.

 - Support for the new Ssconfpmf and SBI PMU extensions, which allows
   for a much more useful perf implementation on RISC-V systems.

 - Support for restartable sequences.

* tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits)
  rseq/selftests: Add support for RISC-V
  RISC-V: Add support for restartable sequence
  MAINTAINERS: Add entry for RISC-V PMU drivers
  Documentation: riscv: Remove the old documentation
  RISC-V: Add sscofpmf extension support
  RISC-V: Add perf platform driver based on SBI PMU extension
  RISC-V: Add RISC-V SBI PMU extension definitions
  RISC-V: Add a simple platform driver for RISC-V legacy perf
  RISC-V: Add a perf core library for pmu drivers
  RISC-V: Add CSR encodings for all HPMCOUNTERS
  RISC-V: Remove the current perf implementation
  RISC-V: Improve /proc/cpuinfo output for ISA extensions
  RISC-V: Do no continue isa string parsing without correct XLEN
  RISC-V: Implement multi-letter ISA extension probing framework
  RISC-V: Extract multi-letter extension names from "riscv, isa"
  RISC-V: Minimal parser for "riscv, isa" strings
  RISC-V: Correctly print supported extensions
  riscv: Fixed misaligned memory access. Fixed pointer comparison.
  MAINTAINERS: update riscv/microchip entry
  riscv: dts: microchip: add new peripherals to icicle kit device tree
  ...

The current perf implementation in RISC-V is not very useful as it can not
count any events other than cycle/instructions. Moreover, perf record
can not be used or the events can not be started or stopped.

Remove the implementation now for a better platform driver in future
that will implement most of the missing functionality.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The hart registers and CSRs are not preserved in non-retentative
suspend state so we provide arch specific helper functions which
will save/restore hart context upon entry/exit to non-retentive
suspend state. These helper functions can be used by cpuidle
drivers for non-retentive suspend entry/exit.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The trace_hardirqs_{on,off}() require the caller to setup frame pointer
properly. This because these two functions use macro 'CALLER_ADDR1' (aka.
__builtin_return_address(1)) to acquire caller info. If the $fp is used
for other purpose, the code generated this macro (as below) could trigger
memory access fault.

   0xffffffff8011510e <+80>:    ld      a1,-16(s0)
   0xffffffff80115112 <+84>:    ld      s2,-8(a1)  # <-- paging fault here

The oops message during booting if compiled with 'irqoff' tracer enabled:
[    0.039615][    T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8
[    0.041925][    T0] Oops [#1]
[    0.042063][    T0] Modules linked in:
[    0.042864][    T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29
[    0.043568][    T0] Hardware name: riscv-virtio,qemu (DT)
[    0.044343][    T0] epc : trace_hardirqs_on+0x56/0xe2
[    0.044601][    T0]  ra : restore_all+0x12/0x6e
[    0.044721][    T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0
[    0.044801][    T0]  gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020
[    0.044882][    T0]  t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0
[    0.044967][    T0]  s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100
[    0.045046][    T0]  a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[    0.045124][    T0]  a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45
[    0.045210][    T0]  s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50
[    0.045289][    T0]  s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8
[    0.045389][    T0]  s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000
[    0.045474][    T0]  s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000
[    0.045548][    T0]  t5 : 0000000000000000 t6 : ffffffff814aa368
[    0.045620][    T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d
[    0.046402][    T0] [<ffffffff80003b94>] restore_all+0x12/0x6e

This because the $fp(aka. $s0) register is not used as frame pointer in the
assembly entry code.

	resume_kernel:
		REG_L s0, TASK_TI_PREEMPT_COUNT(tp)
		bnez s0, restore_all
		REG_L s0, TASK_TI_FLAGS(tp)
                andi s0, s0, _TIF_NEED_RESCHED
                beqz s0, restore_all
                call preempt_schedule_irq
                j restore_all

To fix above issue, here we add one extra level wrapper for function
trace_hardirqs_{on,off}() so they can be safely called by low level entry
code.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The spinwait booting method should only be used for platforms with older
firmware without SBI HSM extension or M-mode firmware because spinwait
method can't support cpu hotplug, kexec or sparse hartid. It is better
to move the entire spinwait implementation to its own config which can
be disabled if required. It is enabled by default to maintain backward
compatibility and M-mode Linux.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The RISC-V special option '-mno-relax' which to disable linker relaxations
is supported by GCC8+. For GCC7 and lower versions do not support this
option.

Fixes: fba8a8674f68 ("RISC-V: Add kexec support")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the memtest= kernel command-line argument.

 - Support for building the kernel with FORTIFY_SOURCE.

 - Support for generic clockevent broadcasts.

 - Support for the buildtar build target.

 - Some build system cleanups to pass more LLVM-friendly arguments.

 - Support for kprobes.

 - A rearranged kernel memory map, the first part of supporting sv48
   systems.

 - Improvements to kexec, along with support for kdump and crash
   kernels.

 - An alternatives-based errata framework, along with support for
   handling a pair of errata that manifest on some SiFive designs
   (including the HiFive Unmatched).

 - Support for XIP.

 - A device tree for the Microchip PolarFire ICICLE SoC and associated
   dev board.

... along with a bunch of cleanups.  There are already a handful of fixes
on the list so there will likely be a part 2.

* tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits)
  RISC-V: Always define XIP_FIXUP
  riscv: Remove 32b kernel mapping from page table dump
  riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y
  RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
  RISC-V: Enable Microchip PolarFire ICICLE SoC
  RISC-V: Initial DTS for Microchip ICICLE board
  dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC
  RISC-V: Add Microchip PolarFire SoC kconfig option
  RISC-V: enable XIP
  RISC-V: Add crash kernel support
  RISC-V: Add kdump support
  RISC-V: Improve init_resources()
  RISC-V: Add kexec support
  RISC-V: Add EM_RISCV to kexec UAPI header
  riscv: vdso: fix and clean-up Makefile
  riscv/mm: Use BUG_ON instead of if condition followed by BUG.
  riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
  riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU
  riscv: module: Create module allocations without exec permissions
  riscv: bpf: Avoid breaking W^X
  ...

This patch allows Linux to act as a crash kernel for use with
kdump. Userspace will let the crash kernel know about the
memory region it can use through linux,usable-memory property
on the /memory node (overriding its reg property), and about the
memory region where the elf core header of the previous kernel
is saved, through a reserved-memory node with a compatible string
of "linux,elfcorehdr". This approach is the least invasive and
re-uses functionality already present.

I tested this on riscv64 qemu and it works as expected, you
may test it by retrieving the dmesg of the previous kernel
through /proc/vmcore, using the vmcore-dmesg utility from
kexec-tools.

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

This patch adds support for kdump, the kernel will reserve a
region for the crash kernel and jump there on panic. In order
for userspace tools (kexec-tools) to prepare the crash kernel
kexec image, we also need to expose some information on
/proc/iomem for the memory regions used by the kernel and for
the region reserved for crash kernel. Note that on userspace
the device tree is used to determine the system's memory
layout so the "System RAM" on /proc/iomem is ignored.

I tested this on riscv64 qemu and works as expected, you may
test it by triggering a crash through /proc/sysrq_trigger:

echo c > /proc/sysrq_trigger

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>