Pull RISC-V updates from Palmer Dabbelt:

 - The PH1520 pinctrl and dwmac drivers are enabeled in defconfig

 - A redundant AQRL barrier has been removed from the futex cmpxchg
   implementation

 - Support for the T-Head vector extensions, which includes exposing
   these extensions to userspace on systems that implement them

 - Some more page table information is now printed on die() and systems
   that cause PA overflows

* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: add a warning when physical memory address overflows
  riscv/mm/fault: add show_pte() before die()
  riscv: Add ghostwrite vulnerability
  selftests: riscv: Support xtheadvector in vector tests
  selftests: riscv: Fix vector tests
  riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
  riscv: hwprobe: Add thead vendor extension probing
  riscv: vector: Support xtheadvector save/restore
  riscv: Add xtheadvector instruction definitions
  riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
  RISC-V: define the elements of the VCSR vector CSR
  riscv: vector: Use vlenb from DT for thead
  riscv: Add thead and xtheadvector as a vendor extension
  riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
  dt-bindings: cpus: add a thead vlen register length property
  dt-bindings: riscv: Add xtheadvector ISA extension description
  RISC-V: Mark riscv_v_init() as __init
  riscv: defconfig: drop RT_GROUP_SCHED=y
  riscv/futex: Optimize atomic cmpxchg
  riscv: defconfig: enable pinctrl and dwmac support for TH1520

KVM/riscv changes for 6.14

- Svvptc, Zabha, and Ziccrse extension support for Guest/VM
- Virtualize SBI system suspend extension for Guest/VM
- Trap related exit statstics as SBI PMU firmware counters for Guest/VM

Charlie Jenkins <charlie@rivosinc.com> says:

xtheadvector is a custom extension that is based upon riscv vector
version 0.7.1 [1]. All of the vector routines have been modified to
support this alternative vector version based upon whether xtheadvector
was determined to be supported at boot.

vlenb is not supported on the existing xtheadvector hardware, so a
devicetree property thead,vlenb is added to provide the vlenb to Linux.

There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is
used to request which thead vendor extensions are supported on the
current platform. This allows future vendors to allocate hwprobe keys
for their vendor.

Support for xtheadvector is also added to the vector kselftests.

[1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361c61d335e03d3134b14133f/xtheadvector.adoc

* b4-shazam-merge:
  riscv: Add ghostwrite vulnerability
  selftests: riscv: Support xtheadvector in vector tests
  selftests: riscv: Fix vector tests
  riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
  riscv: hwprobe: Add thead vendor extension probing
  riscv: vector: Support xtheadvector save/restore
  riscv: Add xtheadvector instruction definitions
  riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
  RISC-V: define the elements of the VCSR vector CSR
  riscv: vector: Use vlenb from DT for thead
  riscv: Add thead and xtheadvector as a vendor extension
  riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
  dt-bindings: cpus: add a thead vlen register length property
  dt-bindings: riscv: Add xtheadvector ISA extension description

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-0-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add a new hwprobe key "RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0" which
allows userspace to probe for the new RISCV_ISA_VENDOR_EXT_XTHEADVECTOR
vendor extension.

This new key will allow userspace code to probe for which thead vendor
extensions are supported. This API is modeled to be consistent with
RISCV_HWPROBE_KEY_IMA_EXT_0. The bitmask returned will have each bit
corresponding to a supported thead vendor extension of the cpumask set.
Just like RISCV_HWPROBE_KEY_IMA_EXT_0, this allows a userspace program
to determine all of the supported thead vendor extensions in one call.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-10-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Ziccrse extension for Guest/VM.

Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/d10e746d165074174f830aa3d89bf3c92017acee.1732854096.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>

Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zabha extension for Guest/VM.

Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/4074feb27819e23bab05b0fd6441a38bf0b6a5e2.1732854096.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>

Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Svvptc extension for Guest/VM.

Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/133509ffe5783b62cf95e8f675cc3e327bee402e.1732854096.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>

Implement a KVM SBI SUSP extension handler. The handler only
validates the system suspend entry criteria and prepares for resuming
in the appropriate state at the resume_addr (as specified by the SBI
spec), but then it forwards the call to the VMM where any system
suspend behavior may be implemented. Since VMM support is needed, KVM
disables the extension by default.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241017074538.18867-5-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>

Define KVM_REG_SIZE() in the common kvm.h header, and delete the arm64 and
RISC-V versions.  As evidenced by the surrounding definitions, all aspects
of the register size encoding are generic, i.e. RISC-V should have moved
arm64's definition to common code instead of copy+pasting.

Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM/riscv changes for 6.13 part #2

- Svade and Svadu extension support for Host and Guest/VM