linux.git/arch/riscv/boot, branch v5.14 Linux kernel source tree riscv: dts: microchip: Add ethernet0 to the aliases node 2021-08-25T03:57:32+00:00 Bin Meng bin.meng@windriver.com 2021-08-04T12:30:15+00:00 417166ddec020c4e969aea064e23822591ad54df U-Boot expects this alias to be in place in order to fix up the mac address of the ethernet node. Note on the Icicle Kit board, currently only emac1 is enabled so it becomes the 'ethernet0'. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 
U-Boot expects this alias to be in place in order to fix up the mac
address of the ethernet node.

Note on the Icicle Kit board, currently only emac1 is enabled so it
becomes the 'ethernet0'.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
riscv: dts: microchip: Use 'local-mac-address' for emac1 2021-08-25T03:56:47+00:00 Bin Meng bin.meng@windriver.com 2021-08-04T12:30:14+00:00 719588dee26bac0d5979c122bc530c43dc5d07c7 Per the DT spec, 'local-mac-address' is used to specify MAC address that was assigned to the network device, while 'mac-address' is used to specify the MAC address that was last used by the boot program, and shall be used only if the value differs from 'local-mac-address' property value. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: conor dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 
Per the DT spec, 'local-mac-address' is used to specify MAC address
that was assigned to the network device, while 'mac-address' is used
to specify the MAC address that was last used by the boot program,
and shall be used only if the value differs from 'local-mac-address'
property value.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: conor dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
riscv: dts: fix memory size for the SiFive HiFive Unmatched 2021-08-04T04:15:31+00:00 Qiu Wenbo qiuwenbo@kylinos.com.cn 2021-07-04T08:34:41+00:00 d09560435cb712c9ec1e62b8a43a79b0af69fe77 The production version of HiFive Unmatched have 16GB memory. Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 
The production version of HiFive Unmatched have 16GB memory.

Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
riscv: dts: fu740: fix cache-controller interrupts 2021-06-19T07:11:53+00:00 David Abdurachmanov david.abdurachmanov@sifive.com 2021-06-13T00:43:57+00:00 7ede12b01b59dc67bef2e2035297dd2da5bfe427 The order of interrupt numbers is incorrect. The order for FU740 is: DirError, DataError, DataFail, DirFail From SiFive FU740-C000 Manual: 19 - L2 Cache DirError 20 - L2 Cache DirFail 21 - L2 Cache DataError 22 - L2 Cache DataFail Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 
The order of interrupt numbers is incorrect.

The order for FU740 is: DirError, DataError, DataFail, DirFail

From SiFive FU740-C000 Manual:
19 - L2 Cache DirError
20 - L2 Cache DirFail
21 - L2 Cache DataError
22 - L2 Cache DataFail

Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
riscv: Fix BUILTIN_DTB for sifive and microchip soc 2021-06-12T04:07:09+00:00 Alexandre Ghiti alex@ghiti.fr 2021-06-04T12:06:39+00:00 0ddd7eaffa644baa78e247bbd220ab7195b1eed6 Fix BUILTIN_DTB config which resulted in a dtb that was actually not built into the Linux image: in the same manner as Canaan soc does, create an object file from the dtb file that will get linked into the Linux image. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 
Fix BUILTIN_DTB config which resulted in a dtb that was actually not
built into the Linux image: in the same manner as Canaan soc does,
create an object file from the dtb file that will get linked into the
Linux image.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Merge tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux 2021-05-06T16:24:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-05-06T16:24:18+00:00 939b7cbc00906b02c6eae6a380ad6c24c7a1e043 Pull RISC-V updates from Palmer Dabbelt: - Support for the memtest= kernel command-line argument. - Support for building the kernel with FORTIFY_SOURCE. - Support for generic clockevent broadcasts. - Support for the buildtar build target. - Some build system cleanups to pass more LLVM-friendly arguments. - Support for kprobes. - A rearranged kernel memory map, the first part of supporting sv48 systems. - Improvements to kexec, along with support for kdump and crash kernels. - An alternatives-based errata framework, along with support for handling a pair of errata that manifest on some SiFive designs (including the HiFive Unmatched). - Support for XIP. - A device tree for the Microchip PolarFire ICICLE SoC and associated dev board. ... along with a bunch of cleanups. There are already a handful of fixes on the list so there will likely be a part 2. * tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits) RISC-V: Always define XIP_FIXUP riscv: Remove 32b kernel mapping from page table dump riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y RISC-V: Fix error code returned by riscv_hartid_to_cpuid() RISC-V: Enable Microchip PolarFire ICICLE SoC RISC-V: Initial DTS for Microchip ICICLE board dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC RISC-V: Add Microchip PolarFire SoC kconfig option RISC-V: enable XIP RISC-V: Add crash kernel support RISC-V: Add kdump support RISC-V: Improve init_resources() RISC-V: Add kexec support RISC-V: Add EM_RISCV to kexec UAPI header riscv: vdso: fix and clean-up Makefile riscv/mm: Use BUG_ON instead of if condition followed by BUG. riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU riscv: module: Create module allocations without exec permissions riscv: bpf: Avoid breaking W^X ... 
Pull RISC-V updates from Palmer Dabbelt:

 - Support for the memtest= kernel command-line argument.

 - Support for building the kernel with FORTIFY_SOURCE.

 - Support for generic clockevent broadcasts.

 - Support for the buildtar build target.

 - Some build system cleanups to pass more LLVM-friendly arguments.

 - Support for kprobes.

 - A rearranged kernel memory map, the first part of supporting sv48
   systems.

 - Improvements to kexec, along with support for kdump and crash
   kernels.

 - An alternatives-based errata framework, along with support for
   handling a pair of errata that manifest on some SiFive designs
   (including the HiFive Unmatched).

 - Support for XIP.

 - A device tree for the Microchip PolarFire ICICLE SoC and associated
   dev board.

... along with a bunch of cleanups.  There are already a handful of fixes
on the list so there will likely be a part 2.

* tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits)
  RISC-V: Always define XIP_FIXUP
  riscv: Remove 32b kernel mapping from page table dump
  riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y
  RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
  RISC-V: Enable Microchip PolarFire ICICLE SoC
  RISC-V: Initial DTS for Microchip ICICLE board
  dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC
  RISC-V: Add Microchip PolarFire SoC kconfig option
  RISC-V: enable XIP
  RISC-V: Add crash kernel support
  RISC-V: Add kdump support
  RISC-V: Improve init_resources()
  RISC-V: Add kexec support
  RISC-V: Add EM_RISCV to kexec UAPI header
  riscv: vdso: fix and clean-up Makefile
  riscv/mm: Use BUG_ON instead of if condition followed by BUG.
  riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
  riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU
  riscv: module: Create module allocations without exec permissions
  riscv: bpf: Avoid breaking W^X
  ...
riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC 2021-05-04T13:58:32+00:00 Greentime Hu greentime.hu@sifive.com 2021-05-04T10:59:40+00:00 ae80d514808557018e44190fdbab23564a51e9ef Link: https://lore.kernel.org/r/20210504105940.100004-7-greentime.hu@sifive.com Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> 
Link: https://lore.kernel.org/r/20210504105940.100004-7-greentime.hu@sifive.com
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
RISC-V: Initial DTS for Microchip ICICLE board 2021-04-26T15:31:31+00:00 Atish Patra atish.patra@wdc.com 2021-03-03T20:02:51+00:00 0fa6107eca4186adc6adda3b54c8b942477066c1 Add initial DTS for Microchip ICICLE board having only essential devices (clocks, sdhci, ethernet, serial, etc). The device tree is based on the U-Boot patch. https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@microchip.com/ Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 
Add initial DTS for Microchip ICICLE board having only
essential devices (clocks, sdhci, ethernet, serial, etc).
The device tree is based on the U-Boot patch.

https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@microchip.com/

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
RISC-V: enable XIP 2021-04-26T15:31:28+00:00 Vitaly Wool vitaly.wool@konsulko.com 2021-04-13T06:35:14+00:00 44c922572952d89a1ed15764f2b373ba62692865 Introduce XIP (eXecute In Place) support for RISC-V platforms. It allows code to be executed directly from non-volatile storage directly addressable by the CPU, such as QSPI NOR flash which can be found on many RISC-V platforms. This makes way for significant optimization of RAM footprint. The XIP kernel is not compressed since it has to run directly from flash, so it will occupy more space on the non-volatile storage. The physical flash address used to link the kernel object files and for storing it has to be known at compile time and is represented by a Kconfig option. XIP on RISC-V will for the time being only work on MMU-enabled kernels. Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> [Alex: Rebase on top of "Move kernel mapping outside the linear mapping" ] Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> [Palmer: disable XIP for allyesconfig] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 
Introduce XIP (eXecute In Place) support for RISC-V platforms.
It allows code to be executed directly from non-volatile storage
directly addressable by the CPU, such as QSPI NOR flash which can
be found on many RISC-V platforms. This makes way for significant
optimization of RAM footprint. The XIP kernel is not compressed
since it has to run directly from flash, so it will occupy more
space on the non-volatile storage. The physical flash address used
to link the kernel object files and for storing it has to be known
at compile time and is represented by a Kconfig option.

XIP on RISC-V will for the time being only work on MMU-enabled
kernels.

Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
[Alex: Rebase on top of "Move kernel mapping outside the linear mapping" ]
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
[Palmer: disable XIP for allyesconfig]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
riscv: Move kernel mapping outside of linear mapping 2021-04-26T15:25:04+00:00 Alexandre Ghiti alex@ghiti.fr 2021-04-11T16:41:44+00:00 2bfc6cd81bd17e4306e24ee47b9554c967bcb499 This is a preparatory patch for relocatable kernel and sv48 support. The kernel used to be linked at PAGE_OFFSET address therefore we could use the linear mapping for the kernel mapping. But the relocated kernel base address will be different from PAGE_OFFSET and since in the linear mapping, two different virtual addresses cannot point to the same physical address, the kernel mapping needs to lie outside the linear mapping so that we don't have to copy it at the same physical offset. The kernel mapping is moved to the last 2GB of the address space, BPF is now always after the kernel and modules use the 2GB memory range right before the kernel, so BPF and modules regions do not overlap. KASLR implementation will simply have to move the kernel in the last 2GB range and just take care of leaving enough space for BPF. In addition, by moving the kernel to the end of the address space, both sv39 and sv48 kernels will be exactly the same without needing to be relocated at runtime. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> [Palmer: Squash the STRICT_RWX fix, and a !MMU fix] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 
This is a preparatory patch for relocatable kernel and sv48 support.

The kernel used to be linked at PAGE_OFFSET address therefore we could use
the linear mapping for the kernel mapping. But the relocated kernel base
address will be different from PAGE_OFFSET and since in the linear mapping,
two different virtual addresses cannot point to the same physical address,
the kernel mapping needs to lie outside the linear mapping so that we don't
have to copy it at the same physical offset.

The kernel mapping is moved to the last 2GB of the address space, BPF
is now always after the kernel and modules use the 2GB memory range right
before the kernel, so BPF and modules regions do not overlap. KASLR
implementation will simply have to move the kernel in the last 2GB range
and just take care of leaving enough space for BPF.

In addition, by moving the kernel to the end of the address space, both
sv39 and sv48 kernels will be exactly the same without needing to be
relocated at runtime.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
[Palmer: Squash the STRICT_RWX fix, and a !MMU fix]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>