linux.git/arch/ppc/platforms/Makefile, branch master

powerpc: Remove arch/ppc and include/asm-ppc

2008-06-10T11:40:22+00:00

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk 
Acked-by: Arnd Bergmann 
Acked-by: Becky Bruce 
Acked-by: Benjamin Herrenschmidt 
Acked-by: Geert Uytterhoeven 
Acked-by: Grant Likely 
Acked-by: Jochen Friedrich 
Acked-by: John Linn 
Acked-by: Jon Loeliger 
Acked-by: Josh Boyer 
Acked-by: Kumar Gala 
Acked-by: Olof Johansson 
Acked-by: Peter Korsgaard 
Acked-by: Scott Wood 
Acked-by: Sean MacLennan 
Acked-by: Segher Boessenkool 
Acked-by: Stefan Roese 
Acked-by: Stephen Neuendorffer 
Acked-by: Wolfgang Denk 
Signed-off-by: Paul Mackerras

[PPC] Remove mpc885ads and mpc86x ads boards from arch/ppc

2008-04-21T15:19:09+00:00

We have a board port in arch/powerpc so we dont need this one anymore.

Signed-off-by: Kumar Gala

[PPC] Remove mpc8272 ads board from arch/ppc

2008-04-21T15:19:09+00:00

We have a board port in arch/powerpc so we dont need this one anymore.

Signed-off-by: Kumar Gala

[POWERPC] Remove APUS support from arch/ppc

2007-09-17T05:15:04+00:00

Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.

Signed-off-by: Adrian Bunk 
Signed-off-by: Paul Mackerras

[POWERPC] Remove the broken Gemini support

2007-01-24T10:13:58+00:00

Signed-off-by: Adrian Bunk 
Signed-off-by: Paul Mackerras

ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc

2006-03-27T23:22:10+00:00

32-bit CHRP machines are now supported only in arch/powerpc, as are
all 64-bit PowerPC processors.  This means that we don't use
Open Firmware on any platform in arch/ppc any more.

This makes PReP support a single-platform option like every other
platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM
is gone from arch/ppc.  CONFIG_PPC_PREP is the option that selects
PReP support and is generally what has replaced
CONFIG_PPC_MULTIPLATFORM within arch/ppc.

_machine is all but dead now, being #defined to 0.

Updated Makefiles, comments and Kconfig options generally to reflect
these changes.

Signed-off-by: Paul Mackerras

[PATCH] ppc32: MPC885ADS, MPC866ADS and MPC8272ADS-specific platform stuff for fs_enet

2006-02-07T11:36:33+00:00

Added proper ppc_sys identification and fs_platform_info's for MPC 885ADS,
866ADS and 8272ADS, utilizing function assignment to remove/do not use
platform devices which conflict with PD-incompatible drivers.

Signed-off-by: Vitaly Bordug 
Signed-off-by: Paul Mackerras

[PATCH] ppc: Remove powermac support from ARCH=ppc

2006-01-15T06:30:44+00:00

This makes it possible to build kernels for PReP and/or CHRP
with ARCH=ppc by removing the (non-building) powermac support.
It's now also possible to select PReP and CHRP independently.
Powermac users should now build with ARCH=powerpc instead of
ARCH=ppc.  (This does mean that it is no longer possible to
build a 32-bit kernel for a G5.)

Signed-off-by: Paul Mackerras

[PATCH] ppc32: nvram driver for chrp

2005-10-29T04:35:00+00:00

This implements a nvram acccess method, similar to
arch/ppc64/kernel/pSeries_nvram.c tested on CHRP B50.

Signed-off-by: Olaf Hering 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Andrew Morton 
Signed-off-by: Paul Mackerras

[PATCH] ppc32: add support for Marvell EV64360BP board

2005-09-05T07:05:59+00:00

This patch adds support for Marvell EV64360BP board.  So far, it supports
mpsc serial console, gigabit ethernet, jffs2 root filesystem, etc.  Other
device support, like watchdog, RTC, will be added later.

Signed-off-by: Lee Nicks 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds