Pull more powerpc updates from Michael Ellerman:
 "Here's some more updates for powerpc for 3.18.

  They are a bit late I know, though must are actually bug fixes.  In my
  defence I nearly cut the top of my finger off last weekend in a
  gruesome bike maintenance accident, so I spent a good part of the week
  waiting around for doctors.  True story, I can send photos if you like :)

  Probably the most interesting fix is the sys_call_table one, which
  enables syscall tracing for powerpc.  There's a fix for HMI handling
  for old firmware, more endian fixes for firmware interfaces, more EEH
  fixes, Anton fixed our routine that gets the current stack pointer,
  and a few other misc bits"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (22 commits)
  powerpc: Only do dynamic DMA zone limits on platforms that need it
  powerpc: sync pseries_le_defconfig with pseries_defconfig
  powerpc: Add printk levels to setup_system output
  powerpc/vphn: NUMA node code expects big-endian
  powerpc/msi: Use WARN_ON() in msi bitmap selftests
  powerpc/msi: Fix the msi bitmap alignment tests
  powerpc/eeh: Block CFG upon frozen Shiner adapter
  powerpc/eeh: Don't collect logs on PE with blocked config space
  powerpc/eeh: Block PCI config access upon frozen PE
  powerpc/pseries: Drop config requests in EEH accessors
  powerpc/powernv: Drop config requests in EEH accessors
  powerpc/eeh: Rename flag EEH_PE_RESET to EEH_PE_CFG_BLOCKED
  powerpc/eeh: Fix condition for isolated state
  powerpc/pseries: Make CPU hotplug path endian safe
  powerpc/pseries: Use dump_stack instead of show_stack
  powerpc: Rename __get_SP() to current_stack_pointer()
  powerpc: Reimplement __get_SP() as a function not a define
  powerpc/numa: Add ability to disable and debug topology updates
  powerpc/numa: check error return from proc_create
  powerpc/powernv: Fallback to old HMI handling behavior for old firmware
  ...

Pull audit updates from Eric Paris:
 "So this change across a whole bunch of arches really solves one basic
  problem.  We want to audit when seccomp is killing a process.  seccomp
  hooks in before the audit syscall entry code.  audit_syscall_entry
  took as an argument the arch of the given syscall.  Since the arch is
  part of what makes a syscall number meaningful it's an important part
  of the record, but it isn't available when seccomp shoots the
  syscall...

  For most arch's we have a better way to get the arch (syscall_get_arch)
  So the solution was two fold: Implement syscall_get_arch() everywhere
  there is audit which didn't have it.  Use syscall_get_arch() in the
  seccomp audit code.  Having syscall_get_arch() everywhere meant it was
  a useless flag on the stack and we could get rid of it for the typical
  syscall entry.

  The other changes inside the audit system aren't grand, fixed some
  records that had invalid spaces.  Better locking around the task comm
  field.  Removing some dead functions and structs.  Make some things
  static.  Really minor stuff"

* git://git.infradead.org/users/eparis/audit: (31 commits)
  audit: rename audit_log_remove_rule to disambiguate for trees
  audit: cull redundancy in audit_rule_change
  audit: WARN if audit_rule_change called illegally
  audit: put rule existence check in canonical order
  next: openrisc: Fix build
  audit: get comm using lock to avoid race in string printing
  audit: remove open_arg() function that is never used
  audit: correct AUDIT_GET_FEATURE return message type
  audit: set nlmsg_len for multicast messages.
  audit: use union for audit_field values since they are mutually exclusive
  audit: invalid op= values for rules
  audit: use atomic_t to simplify audit_serial()
  kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0]
  audit: reduce scope of audit_log_fcaps
  audit: reduce scope of audit_net_id
  audit: arm64: Remove the audit arch argument to audit_syscall_entry
  arm64: audit: Add audit hook in syscall_trace_enter/exit()
  audit: x86: drop arch from __audit_syscall_entry() interface
  sparc: implement is_32bit_task
  sparc: properly conditionalize use of TIF_32BIT
  ...

Scott's patch 1c98025c6c95 "Dynamic DMA zone limits" changed
dma_direct_alloc_coherent() to start using dev->coherent_dma_mask.

That seems fair enough, but it exposes the fact that some of the drivers
we care about on IBM platforms aren't setting the coherent mask.

The proper fix is to have drivers set the coherent mask and also have
the platform code honor it.

For now, just restrict the dynamic DMA zone limits to the platforms that
need it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Scott Wood <scottwood@freescale.com>

Now KVM is working on LE, enable it. Also enable transarent
hugepage which has already been enabled on BE.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 0b0b0893d49b "of/pci: Fix the conversion of IO ranges into IO
resources" changed the behaviour of of_pci_range_to_resource().

Previously it simply populated the resource based on the arguments. Now
it calls pci_register_io_range() and pci_address_to_pio(). These both
have two implementations depending on whether PCI_IOBASE is defined,
which it is not for powerpc.

Further complicating matters, both routines are weak, and powerpc
implements it's own version of one - pci_address_to_pio(). However
powerpc's implementation depends on other initialisations which are done
later in boot.

The end result is incorrectly initialised IO space. Often we can get
away with that, because we don't make much use of IO space. However
virtio requires it, so we see eg:

  pci_bus 0000:00: root bus resource [io  0xffff] (bus address [0xffffffffffffffff-0xffffffffffffffff])
  PCI: Cannot allocate resource region 0 of device 0000:00:01.0, will remap
  virtio-pci 0000:00:01.0: can't enable device: BAR 0 [io  size 0x0020] not assigned

The simplest fix for now is to just stop using of_pci_range_to_resource(),
and open-code the original implementation, that's all we want it to do.

Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The associativity domain numbers are obtained from the hypervisor through
registers and written into memory by the guest: the packed array passed to
vphn_unpack_associativity() is then native-endian, unlike what was assumed
in the following commit:

commit b08a2a12e44eaec5024b2b969f4fcb98169d1ca3
Author: Alistair Popple <alistair@popple.id.au>
Date:   Wed Aug 7 02:01:44 2013 +1000

    powerpc: Make NUMA device node code endian safe

This issue fills the topology with bogus data and makes it unusable. It may
lead to severe performance breakdowns.

We should ideally patch the vphn_unpack_associativity() function to do the
64-bit loads, but this requires some more brain storming.

In the meantime, let's go for a suboptimal and temporary bug fix: this patch
converts each 64-bit value of the packed array to big endian, as expected by
the current parsing code in vphn_unpack_associativity().

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...

As demonstrated in the previous commit, the failure message from the msi
bitmap selftests is a bit subtle, it's easy to miss a failure in a busy
boot log.

So drop our check() macro and use WARN_ON() instead. This necessitates
inverting all the conditions as well.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When we added the alignment tests recently we failed to check they were
actually passing - oops.

They weren't passing, because the bitmap was full. We should also be a
bit more careful when checking the return code, a negative error return
could by divisible by our alignment value.

Fixes: b0345bbc6d09 ("powerpc/msi: Improve IRQ bitmap allocator")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>