linux.git/arch/powerpc/sysdev/qe_lib/qe_io.c, branch v3.2

treewide: Convert uses of struct resource to resource_size(ptr)

2011-06-10T12:55:36+00:00

Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches 
Signed-off-by: Jiri Kosina

powerpc: Remove trailing space in messages

2010-02-09T02:56:23+00:00

Signed-off-by: Frans Pop 
Cc: linuxppc-dev@ozlabs.org
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Signed-off-by: Benjamin Herrenschmidt

powerpc/QE: prepare QE PIO code for GPIO LIB support

2008-06-10T15:39:18+00:00

- split and export __par_io_config_pin() out of par_io_config_pin(), so we
  could use the prefixed version with GPIO LIB API;
- rename struct port_regs to qe_pio_regs, and place it into qe.h;
- rename #define NUM_OF_PINS to QE_PIO_PINS, and place it into qe.h.

Signed-off-by: Anton Vorontsov 
Acked-By: Timur Tabi 
Signed-off-by: Kumar Gala

[POWERPC] QE: fix sparse warnings

2008-04-17T06:01:39+00:00

Signed-off-by: Anton Vorontsov 
Signed-off-by: Kumar Gala

[POWERPC] Replace remaining FUNCTION occurrences

2008-04-01T09:43:09+00:00

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Andrew Morton 
Signed-off-by: Paul Mackerras

[POWERPC] QE: pario - support for MPC85xx layout

2007-10-08T13:39:01+00:00

8 bytes padding required to match MPC85xx registers layout.

Signed-off-by: Anton Vorontsov 
Reviewed-by: Kim Phillips 
Signed-off-by: Kumar Gala

[POWERPC] qe: miscellaneous code improvements and fixes to the QE library

2007-10-08T13:38:15+00:00

This patch makes numerous miscellaneous code improvements to the QE library.

1. Remove struct ucc_common and merge ucc_init_guemr() into ucc_set_type()
   (every caller of ucc_init_guemr() also calls ucc_set_type()).  Modify all
   callers of ucc_set_type() accordingly.

2. Remove the unused enum ucc_pram_initial_offset.

3. Refactor qe_setbrg(), also implement work-around for errata QE_General4.

4. Several printk() calls were missing the terminating \n.

5. Add __iomem where needed, and change u16 to __be16 and u32 to __be32 where
   appropriate.

6. In ucc_slow_init() the RBASE and TBASE registers in the PRAM were programmed
   with the wrong value.

7. Add the protocol type to struct us_info and updated ucc_slow_init() to
   use it, instead of always programming QE_CR_PROTOCOL_UNSPECIFIED.

8. Rename ucc_slow_restart_x() to ucc_slow_restart_tx()

9. Add several macros in qe.h (mostly for slow UCC support, but also to
   standardize some naming convention) and remove several unused macros.

10. Update ucc_geth.c to use the new macros.

11. Add ucc_slow_info.protocol to specify which QE_CR_PROTOCOL_xxx protcol
    to use when initializing the UCC in ucc_slow_init().

12. Rename ucc_slow_pram.rfcr to rbmr and ucc_slow_pram.tfcr to tbmr, since
    these are the real names of the registers.

13. Use the setbits, clrbits, and clrsetbits where appropriate.

14. Refactor ucc_set_qe_mux_rxtx().

15. Remove all instances of 'volatile'.

16. Simplify get_cmxucr_reg();

17. Replace qe_mux.cmxucrX with qe_mux.cmxucr[].

18. Updated struct ucc_geth because struct ucc_fast is not padded any more.

Signed-off-by: Timur Tabi 
Signed-off-by: Kumar Gala

[POWERPC] Rename get_property to of_get_property: arch/powerpc

2007-04-12T17:55:19+00:00

Signed-off-by: Stephen Rothwell 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[HEADERS] Put linux/config.h out of its misery.

2006-10-09T23:13:51+00:00

Signed-off-by: Dave Jones

[POWERPC] Add QUICC Engine (QE) infrastructure

2006-10-04T05:24:27+00:00

Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.

Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:

"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support.  Qe_lib is used by
QE device drivers such as ucc_geth driver.

This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.

v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.

v3: Address comments from Kumar;  Update definition of several
device tree nodes;  Copyright style change."

In addition, the following changes have been made:

o removed typedefs
o uint -> u32 conversions
o removed following defines:
  QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
  BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
  because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)

Signed-off-by: Li Yang 
Signed-off-by: Shlomi Gridish 
Signed-off-by: Kim Phillips 
Signed-off-by: Paul Mackerras