linux.git/arch/powerpc/sysdev/Makefile, branch v2.6.19

[POWERPC] Add QUICC Engine (QE) infrastructure

2006-10-04T05:24:27+00:00

Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.

Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:

"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support.  Qe_lib is used by
QE device drivers such as ucc_geth driver.

This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.

v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.

v3: Address comments from Kumar;  Update definition of several
device tree nodes;  Copyright style change."

In addition, the following changes have been made:

o removed typedefs
o uint -> u32 conversions
o removed following defines:
  QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
  BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
  because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)

Signed-off-by: Li Yang 
Signed-off-by: Shlomi Gridish 
Signed-off-by: Kim Phillips 
Signed-off-by: Paul Mackerras

POWERPC: Move generic cpm2 stuff to powerpc

2006-09-21T18:18:53+00:00

This moves the cpm2 common code and PIC stuff to the powerpc. Most of the files
were just copied from ppc/, with minor tuning to make it compile, and, subsequently, work.

Signed-off-by: Vitaly Bordug

[POWERPC] back up old school ipic.[hc] to arch/ppc

2006-08-30T00:34:33+00:00

Keep from breaking 83xx arch/ppc build.  Back up old school arch/powerpc/sysdev/ipic.[hc] to arch/ppc/syslib.

Signed-off-by: Kim Phillips 
Signed-off-by: Paul Mackerras

[POWERPC] Copy i8259 code back to arch/ppc

2006-07-03T09:55:30+00:00

This copies the i8259 interrupt controller driver from arch/powerpc
to arch/ppc. It's currently shared by both architectures, but the upcoming
arch/powerpc interrupt changes will break the arch/ppc builds. The changes
are too important to just use #ifdef's in the driver.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[POWERPC] todc: add support for Time-Of-Day-Clock

2006-06-29T06:22:46+00:00

This is a resubmit with a proper subject and with all comments addressed.
Applies cleanly to powerpc.git 649e85797259162f7fdc696420e7492f20226f2d

Mark
--

The todc code from arch/ppc supports many todc/rtc chips and is needed
in arch/powerpc.  This patch adds the todc code to arch/powerpc.

Signed-off-by: Mark A. Greer 
--

 arch/powerpc/Kconfig         |    7
 arch/powerpc/sysdev/Makefile |    1
 arch/powerpc/sysdev/todc.c   |  392 ++++++++++++++++++++++++++++++++++
 include/asm-powerpc/todc.h   |  487 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 887 insertions(+)
--
Signed-off-by: Paul Mackerras

[POWERPC] Add tsi108 pci and platform device data register function

2006-06-29T06:20:36+00:00

Add Tundra Semiconductor tsi108 pci and platform device data register
function support.

Signed-off-by: Alexandre Bounine 
Signed-off-by: Roy Zang	

 ---
Signed-off-by: Paul Mackerras

[POWERPC] Optimise some TOC usage

2006-06-15T09:31:25+00:00

Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles.

Signed-off-by: Anton Blanchard 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: Add FSL SOC library and setup code

2006-01-14T00:13:22+00:00

Parse the flat device tree for devices on Freescale SOC's that we know
about (gianfar, gianfar_mdio, i2c, mpc83xx_wdt).  We need to setup
platform devices and platform data for these devices to match arch/ppc
usage.

Also add a helper function (get_immrbase) that reports the base
address of the MMIO registers on the SOC.

Signed-off-by: Kumar Gala 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: Updated Kconfig and Makefiles for 83xx support

2006-01-11T04:35:29+00:00

Updated Kconfig & Makefiles in prep for adding support for the Freescale
MPC83xx family of processors to arch/powerpc.  Moved around some config
options that are more globally applicable to other PowerPC processors.
Added a temporary config option (83xx) to match existing arch/ppc support
for the MPC83xx line.

Signed-off-by: Kumar Gala 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: Experimental support for new G5 Macs (#2)

2006-01-09T04:03:17+00:00

This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental !  There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras