linux.git/arch/powerpc/sysdev/Makefile, branch v2.6.16

[PATCH] powerpc: Add FSL SOC library and setup code

2006-01-14T00:13:22+00:00

Parse the flat device tree for devices on Freescale SOC's that we know
about (gianfar, gianfar_mdio, i2c, mpc83xx_wdt).  We need to setup
platform devices and platform data for these devices to match arch/ppc
usage.

Also add a helper function (get_immrbase) that reports the base
address of the MMIO registers on the SOC.

Signed-off-by: Kumar Gala 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: Updated Kconfig and Makefiles for 83xx support

2006-01-11T04:35:29+00:00

Updated Kconfig & Makefiles in prep for adding support for the Freescale
MPC83xx family of processors to arch/powerpc.  Moved around some config
options that are more globally applicable to other PowerPC processors.
Added a temporary config option (83xx) to match existing arch/ppc support
for the MPC83xx line.

Signed-off-by: Kumar Gala 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: Experimental support for new G5 Macs (#2)

2006-01-09T04:03:17+00:00

This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental !  There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: moved ipic code to arch/powerpc

2006-01-09T03:48:57+00:00

Moved 83xx and QUICC Engine interrupt handling code into arch/powerpc
as a precursor of getting 83xx sub-arch building in arch/powerpc.

Signed-off-by: Kumar Gala 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: move mmio_nvram.c over to arch/powerpc

2005-11-01T10:03:04+00:00

The nvram code formally known as bpa_nvram.c is rather
generic really, so it is quite likely to be useful to
future boards not based on cell.

This patch puts it into arch/powerpc/sysdev.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Paul Mackerras

powerpc: Move U3 IOMMU driver to arch/powerpc/sysdev

2005-10-27T22:29:36+00:00

Signed-off-by: Paul Mackerras

[PATCH] powerpc: Moved dcr support to arch/powerpc

2005-10-27T10:51:22+00:00

Signed-off-by: Kumar K. Gala 
Signed-off-by: Paul Mackerras

powerpc: Pull out MPC106 (grackle) initialization code into its own file

2005-10-26T07:16:38+00:00

This is so that the 32-bit CHRP code can use it.  The MPC106
initialization code is now in arch/powerpc/sysdev/grackle.c and
is controlled by CONFIG_PPC_MPC106.

Signed-off-by: Paul Mackerras

powerpc: Merge i8259.c into arch/powerpc/sysdev

2005-10-26T06:47:42+00:00

This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset.  i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now.  This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.

Signed-off-by: Paul Mackerras

ppc: Use the indirect_pci.c from arch/powerpc/sysdev

2005-10-26T06:36:55+00:00

This defines a CONFIG_INDIRECT_PCI symbol to control whether it
gets used or not, and fixes the Kconfig to select that symbol for
platforms that need it.

Signed-off-by: Paul Mackerras