linux.git/arch/powerpc/platforms, branch v6.5

powerpc/powermac: Use early_* IO variants in via_calibrate_decr()

2023-08-02T12:57:22+00:00

On a powermac platform, via the call path:

  start_kernel()
    time_init()
      ppc_md.calibrate_decr() (pmac_calibrate_decr)
        via_calibrate_decr()

ioremap() and iounmap() are called. The unmap can enable interrupts
unexpectedly (cond_resched() in vunmap_pmd_range()), which causes a
warning later in the boot sequence in start_kernel().

Use the early_* variants of these IO functions to prevent this.

The issue is pre-existing, but is surfaced by commit 721255b9826b
("genirq: Use a maple tree for interrupt descriptor management").

Signed-off-by: Benjamin Gray 
Reviewed-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20230706010816.72682-1-bgray@linux.ibm.com

powerpc/64e: Fix secondary thread bringup for ELFv2 kernels

2023-08-01T11:01:27+00:00

When booting on e6500 with an ELF v2 ABI kernel, the secondary threads do
not start correctly:

    [    0.051118] smp: Bringing up secondary CPUs ...
    [    5.072700] Processor 1 is stuck.

This occurs because the startup code is written to use function
descriptors when loading the entry point for the secondary threads. When
building with ELF v2 ABI there are no function descriptors, and the code
loads junk values for the entry point address.

Fix it by using ppc_function_entry() in C, and DOTSYM() in asm, both of
which work correctly for ELF v2 ABI as well as ELF v1 ABI kernels.

Fixes: 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian builds")
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20230801102650.48705-1-mpe@ellerman.id.au

powerpc/512x: lpbfifo: Convert to platform remove callback returning void

2023-07-17T05:13:48+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20230711143145.1192651-1-u.kleine-koenig@pengutronix.de

powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close

2023-07-17T00:35:06+00:00

Commit 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR
core removal") unmaps the window paste address and issues HCALL to
close window in the hypervisor for migration or DLPAR core removal
events. So holds mmap_mutex and then mmap lock before unmap the
paste address. But if the user space issue mmap paste address at
the same time with the migration event, coproc_mmap() is called
after holding the mmap lock which can trigger deadlock when trying
to acquire mmap_mutex in coproc_mmap().

t1: mmap() call to mmap              t2: Migration event
    window paste address

do_mmap2()                           migration_store()
 ksys_mmap_pgoff()                    pseries_migrate_partition()
  vm_mmap_pgoff()                      vas_migration_handler()
    Acquire mmap lock                   reconfig_close_windows()
    do_mmap()                             lock mmap_mutex
     mmap_region()                        Acquire mmap lock
      call_mmap()                         //Wait for mmap lock
       coproc_mmap()                        unmap vma
         lock mmap_mutex                    update window status
         //wait for mmap_mutex            Release mmap lock
          mmap vma                        unlock mmap_mutex
          update window status
         unlock mmap_mutex
    ...
    Release mmap lock

Fix this deadlock issue by holding mmap lock first before mmap_mutex
in reconfig_close_windows().

Fixes: 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR core removal")
Signed-off-by: Haren Myneni 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20230716100506.7833-1-haren@linux.ibm.com

powerpc: Include asm/nmi.c in mobility.c for watchdog_hardlockup_set_timeout_pct()

2023-07-03T06:08:10+00:00

The powerpc/platforms/pseries/mobility.c calls
watchdog_hardlockup_set_timeout_pct(), which is declared in
. We used to automatically get  included, but
that changed as of commit 7ca8fe94aa92 ("watchdog/hardlockup: define
HARDLOCKUP_DETECTOR_ARCH"). Let's add the explicit include.

Reported-by: Randy Dunlap 
Closes: https://lore.kernel.org/r/af19b76d-aa4b-6c88-9cac-eae4b2072497@infradead.org
Fixes: 7ca8fe94aa92 ("watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH")
Signed-off-by: Douglas Anderson 
Tested-by: Randy Dunlap  # build-tested
Reviewed-by: Petr Mladek 
Reviewed-by: Randy Dunlap 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid

Merge tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2023-06-30T16:20:08+00:00

Pull powerpc updates from Michael Ellerman:

 - Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations

 - Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
   use the -mprofile-kernel option (kernel specific ftrace ABI) for big
   endian ELFv2 kernels

 - Add initial Dynamic Execution Control Register (DEXCR) support, and
   allow the ROP protection instructions to be used on Power 10

 - Various other small features and fixes

Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.

* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
  powerpc: remove checks for binutils older than 2.25
  powerpc: Fail build if using recordmcount with binutils v2.37
  powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
  powerpc/iommu: Only build sPAPR access functions on pSeries
  powerpc: powernv: Annotate data races in opal events
  powerpc: Mark writes registering ipi to host cpu through kvm and polling
  powerpc: Annotate accesses to ipi message flags
  powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
  powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
  powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
  powerpc: qspinlock: Mark accesses to qnode lock checks
  powerpc/powernv/pci: Remove last IODA1 defines
  powerpc/powernv/pci: Remove MVE code
  powerpc/powernv/pci: Remove ioda1 support
  powerpc: 52xx: Make immr_id DT match tables static
  powerpc: mpc512x: Remove open coded "ranges" parsing
  powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
  powerpc: fsl: Use of_property_read_reg() to parse "reg"
  powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
  macintosh: Use of_property_read_reg() to parse "reg"
  ...

Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2023-06-28T17:59:38+00:00

Pull non-mm updates from Andrew Morton:

 - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
   directories

 - Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector. It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs

 - Zhen Lei has enhanced kexec's ability to support two crash regions

 - Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries

 - And the usual bunch of singleton patches in various places

* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  kernel/time/posix-stubs.c: remove duplicated include
  ocfs2: remove redundant assignment to variable bit_off
  watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
  powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
  devres: show which resource was invalid in __devm_ioremap_resource()
  watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
  watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
  watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
  watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
  watchdog/hardlockup: make the config checks more straightforward
  watchdog/hardlockup: sort hardlockup detector related config values a logical way
  watchdog/hardlockup: move SMP barriers from common code to buddy code
  watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
  watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
  watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
  watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
  watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
  watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
  watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
  watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
  ...

Merge tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq

2023-06-27T23:46:06+00:00

Pull ordered workqueue creation updates from Tejun Heo:
 "For historical reasons, unbound workqueues with max concurrency limit
  of 1 are considered ordered, even though the concurrency limit hasn't
  been system-wide for a long time.

  This creates ambiguity around whether ordered execution is actually
  required for correctness, which was actually confusing for e.g. btrfs
  (btrfs updates are being routed through the btrfs tree).

  There aren't that many users in the tree which use the combination and
  there are pending improvements to unbound workqueue affinity handling
  which will make inadvertent use of ordered workqueue a bigger loss.

  This clarifies the situation for most of them by updating the ones
  which require ordered execution to use alloc_ordered_workqueue().

  There are some conversions being routed through subsystem-specific
  trees and likely a few stragglers. Once they're all converted,
  workqueue can trigger a warning on unbound + @max_active==1 usages and
  eventually drop the implicit ordered behavior"

* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
  net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
  net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
  dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
  media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
  scsi: NCR5380: Use default @max_active for hostdata->work_q
  media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
  crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
  wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
  wifi: mwifiex: Use default @max_active for workqueues
  wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
  xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
  virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
  net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
  net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
  greybus: Use alloc_ordered_workqueue() to create ordered workqueues
  powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues

Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux

2023-06-26T19:47:20+00:00

Pull block updates from Jens Axboe:

 - NVMe pull request via Keith:
      - Various cleanups all around (Irvin, Chaitanya, Christophe)
      - Better struct packing (Christophe JAILLET)
      - Reduce controller error logs for optional commands (Keith)
      - Support for >=64KiB block sizes (Daniel Gomez)
      - Fabrics fixes and code organization (Max, Chaitanya, Daniel
        Wagner)

 - bcache updates via Coly:
      - Fix a race at init time (Mingzhe Zou)
      - Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)

 - use page pinning in the block layer for dio (David)

 - convert old block dio code to page pinning (David, Christoph)

 - cleanups for pktcdvd (Andy)

 - cleanups for rnbd (Guoqing)

 - use the unchecked __bio_add_page() for the initial single page
   additions (Johannes)

 - fix overflows in the Amiga partition handling code (Michael)

 - improve mq-deadline zoned device support (Bart)

 - keep passthrough requests out of the IO schedulers (Christoph, Ming)

 - improve support for flush requests, making them less special to deal
   with (Christoph)

 - add bdev holder ops and shutdown methods (Christoph)

 - fix the name_to_dev_t() situation and use cases (Christoph)

 - decouple the block open flags from fmode_t (Christoph)

 - ublk updates and cleanups, including adding user copy support (Ming)

 - BFQ sanity checking (Bart)

 - convert brd from radix to xarray (Pankaj)

 - constify various structures (Thomas, Ivan)

 - more fine grained persistent reservation ioctl capability checks
   (Jingbo)

 - misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
   Jordy, Li, Min, Yu, Zhong, Waiman)

* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
  scsi/sg: don't grab scsi host module reference
  ext4: Fix warning in blkdev_put()
  block: don't return -EINVAL for not found names in devt_from_devname
  cdrom: Fix spectre-v1 gadget
  block: Improve kernel-doc headers
  blk-mq: don't insert passthrough request into sw queue
  bsg: make bsg_class a static const structure
  ublk: make ublk_chr_class a static const structure
  aoe: make aoe_class a static const structure
  block/rnbd: make all 'class' structures const
  block: fix the exclusive open mask in disk_scan_partitions
  block: add overflow checks for Amiga partition support
  block: change all __u32 annotations to __be32 in affs_hardblocks.h
  block: fix signed int overflow in Amiga partition support
  block: add capacity validation in bdev_add_partition()
  block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
  block: disallow Persistent Reservation on partitions
  reiserfs: fix blkdev_put() warning from release_journal_dev()
  block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
  block: document the holder argument to blkdev_get_by_path
  ...

powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory

2023-06-26T04:57:31+00:00

When memory is dynamically added/removed, iommu_mem_notifier() is invoked. This
routine traverses through all the DMA windows (DDW only, not default windows)
to add/remove "direct" TCE mappings. The routines for this purpose are
tce_clearrange_multi_pSeriesLP() and tce_clearrange_multi_pSeriesLP().

Both these routines are designed for Direct mapped DMA windows only.

The issue is that there could be some DMA windows in the list which are not
"direct" mapped. Calling these routines will either,

1) remove some dynamically mapped TCEs, Or
2) try to add TCEs which are out of bounds and HCALL returns H_PARAMETER

Here are the side affects when these routines are incorrectly invoked for
"dynamically" mapped DMA windows.

tce_setrange_multi_pSeriesLP()

This adds direct mapped TCEs. Now, this could invoke HCALL to add TCEs with
out-of-bound range. In this scenario, HCALL will return H_PARAMETER and DLAR
ADD of memory will fail.

tce_clearrange_multi_pSeriesLP()

This will remove range of TCEs. The TCE range that is calculated, depending on
the memory range being added, could infact be mapping some other memory
address (for dynamic DMA window scenario). This will wipe out those TCEs.

The solution is for iommu_mem_notifier() to only invoke these routines for
"direct" mapped DMA windows.

Signed-off-by: Gaurav Batra 
Reviewed-by: Brian King 
[mpe: Initialise direct at allocation time in ddw_list_new_entry()]
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20230613171641.15641-1-gbatra@linux.vnet.ibm.com