linux.git/arch/powerpc/platforms/pseries/setup.c, branch v6.2 Linux kernel source tree powerpc/pseries: Add firmware details to the hardware description 2022-09-30T08:35:53+00:00 Michael Ellerman mpe@ellerman.id.au 2022-09-30T08:27:09+00:00 8535a1afff0f4f568eb589f3795a930ef3d483b0 Add firmware version details to the hardware description, which is printed at boot and in case of an oops. Use /hypervisor if we find it, though currently it only exists if we're running under qemu. Look for "ibm,powervm-partition" which is specified in PAPR+ v2.11 and tells us we're running under PowerVM. Failing that look for "ibm,fw-net-version" which is seen on PowerVM going back to at least Power6. eg: Hardware name: ... of:IBM,FW860.42 (SV860_138) hv:phyp Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-6-mpe@ellerman.id.au 
Add firmware version details to the hardware description, which is
printed at boot and in case of an oops.

Use /hypervisor if we find it, though currently it only exists if we're
running under qemu.

Look for "ibm,powervm-partition" which is specified in PAPR+ v2.11 and
tells us we're running under PowerVM.

Failing that look for "ibm,fw-net-version" which is seen on PowerVM
going back to at least Power6.

eg: Hardware name: ... of:IBM,FW860.42 (SV860_138) hv:phyp

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-6-mpe@ellerman.id.au
powerpc/pseries: Implement CONFIG_PARAVIRT_TIME_ACCOUNTING 2022-09-05T04:14:02+00:00 Nicholas Piggin npiggin@gmail.com 2022-09-02T08:53:14+00:00 0e8a63132800dd8ae5fcb19113f79bea43ea18d9 CONFIG_VIRT_CPU_ACCOUNTING_GEN under pseries does not provide stolen time accounting unless CONFIG_PARAVIRT_TIME_ACCOUNTING is enabled. Implement this using the VPA accumulated wait counters. Note this will not work on current KVM hosts because KVM does not implement the VPA dispatch counters (yet). It could be implemented with the dispatch trace log as it is for VIRT_CPU_ACCOUNTING_NATIVE, but that is not necessary for the more limited accounting provided by PARAVIRT_TIME_ACCOUNTING, and it is more expensive, complex, and has downsides like potential log wrap. From Shrikanth: [...] it was tested on Power10 [PowerVM] Shared LPAR. system has two LPAR. we will call first one LPAR1 and second one as LPAR2. Test was carried out in SMT=1. Similar observation was seen in SMT=8 as well. LPAR config header from each LPAR is below. LPAR1 is twice as big as LPAR2. Since Both are sharing the same underlying hardware, work stealing will happen when both the LPAR's are contending for the same resource. LPAR1: type=Shared mode=Uncapped smt=Off lcpu=40 cpus=40 ent=20.00 LPAR2: type=Shared mode=Uncapped smt=Off lcpu=20 cpus=40 ent=10.00 mpstat was used to check for the utilization. stress-ng has been used as the workload. Few cases are tested. when the both LPAR are idle there is no steal time. when LPAR1 starts running at 100% which consumes all of the physical resource, steal time starts to get accounted. With LPAR1 running at 100% and LPAR2 starts running, steal time starts increasing. This is as expected. When the LPAR2 Load is increased further, steal time increases further. Case 1: 0% LPAR1; 0% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 0.00 0.00 0.05 0.00 0.00 0.00 0.00 0.00 0.00 99.95 Case 2: 100% LPAR1; 0% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 97.68 0.00 0.00 0.00 0.00 0.00 2.32 0.00 0.00 0.00 Case 3: 100% LPAR1; 50% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 86.34 0.00 0.10 0.00 0.00 0.03 13.54 0.00 0.00 0.00 Case 4: 100% LPAR1; 100% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 78.54 0.00 0.07 0.00 0.00 0.02 21.36 0.00 0.00 0.00 Case 5: 50% LPAR1; 100% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 49.37 0.00 0.00 0.00 0.00 0.00 1.17 0.00 0.00 49.47 Patch is accounting for the steal time and basic tests are holding good. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> [mpe: Add SPDX tag to new paravirt_api_clock.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220902085316.2071519-3-npiggin@gmail.com 
CONFIG_VIRT_CPU_ACCOUNTING_GEN under pseries does not provide stolen
time accounting unless CONFIG_PARAVIRT_TIME_ACCOUNTING is enabled.
Implement this using the VPA accumulated wait counters.

Note this will not work on current KVM hosts because KVM does not
implement the VPA dispatch counters (yet). It could be implemented
with the dispatch trace log as it is for VIRT_CPU_ACCOUNTING_NATIVE,
but that is not necessary for the more limited accounting provided
by PARAVIRT_TIME_ACCOUNTING, and it is more expensive, complex, and
has downsides like potential log wrap.

From Shrikanth:

  [...] it was tested on Power10 [PowerVM] Shared LPAR. system has two
  LPAR. we will call first one LPAR1 and second one as LPAR2. Test was
  carried out in SMT=1. Similar observation was seen in SMT=8 as well.

  LPAR config header from each LPAR is below. LPAR1 is twice as big as
  LPAR2. Since Both are sharing the same underlying hardware, work
  stealing will happen when both the LPAR's are contending for the same
  resource.

  LPAR1:
  type=Shared mode=Uncapped smt=Off lcpu=40 cpus=40 ent=20.00
  LPAR2:
  type=Shared mode=Uncapped smt=Off lcpu=20 cpus=40 ent=10.00

  mpstat was used to check for the utilization. stress-ng has been used
  as the workload. Few cases are tested. when the both LPAR are idle
  there is no steal time. when LPAR1 starts running at 100% which
  consumes all of the physical resource, steal time starts to get
  accounted.  With LPAR1 running at 100% and LPAR2 starts running, steal
  time starts increasing. This is as expected. When the LPAR2 Load is
  increased further, steal time increases further.

  Case 1: 0% LPAR1; 0% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
   0.00   0.00   0.05   0.00   0.00   0.00   0.00   0.00   0.00  99.95

  Case 2: 100% LPAR1; 0% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
  97.68   0.00   0.00   0.00   0.00   0.00   2.32   0.00   0.00   0.00

  Case 3: 100% LPAR1; 50% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
  86.34   0.00   0.10   0.00   0.00   0.03  13.54   0.00   0.00   0.00

  Case 4: 100% LPAR1; 100% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
  78.54   0.00   0.07   0.00   0.00   0.02  21.36   0.00   0.00   0.00

  Case 5: 50% LPAR1; 100% LPAR2
   %usr  %nice   %sys %iowait  %irq  %soft %steal %guest %gnice  %idle
  49.37   0.00   0.00   0.00   0.00   0.00   1.17   0.00   0.00  49.47

  Patch is accounting for the steal time and basic tests are holding
  good.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
[mpe: Add SPDX tag to new paravirt_api_clock.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902085316.2071519-3-npiggin@gmail.com
powerpc/pseries: register pseries-wdt device with platform bus 2022-07-20T11:57:39+00:00 Scott Cheloha cheloha@linux.ibm.com 2022-07-13T20:23:34+00:00 578030bfe117060bf86c81aaa7b3faead4589810 PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. These timers do not conform to PowerPC device conventions. They are not affixed to any extant bus, nor do they have full representation in the device tree. As a workaround we represent them as platform devices. This patch registers a single platform device, "pseries-wdt", with the platform bus if the FW_FEATURE_WATCHDOG flag is set. A driver for this device, "pseries-wdt", will be introduced in a subsequent patch. Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220713202335.1217647-4-cheloha@linux.ibm.com 
PAPR v2.12 defines a new hypercall, H_WATCHDOG.  The hypercall permits
guest control of one or more virtual watchdog timers.

These timers do not conform to PowerPC device conventions.  They are
not affixed to any extant bus, nor do they have full representation in
the device tree.

As a workaround we represent them as platform devices.

This patch registers a single platform device, "pseries-wdt", with the
platform bus if the FW_FEATURE_WATCHDOG flag is set.

A driver for this device, "pseries-wdt", will be introduced in a
subsequent patch.

Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713202335.1217647-4-cheloha@linux.ibm.com
Merge branch 'fixes' into next 2022-07-09T09:29:34+00:00 Michael Ellerman mpe@ellerman.id.au 2022-07-09T09:29:34+00:00 7e74dabc3daf0c217cb5e8e849a8f6c02927950f Merge our fixes branch. In particular this brings in commit 986481618023 ("powerpc/book3e: Fix PUD allocation size in map_kernel_page()") which fixes a build failure in next, because commit 2db2008e6363 ("powerpc/64e: Rewrite p4d_populate() as a static inline function") depends on it. 
Merge our fixes branch. In particular this brings in commit
986481618023 ("powerpc/book3e: Fix PUD allocation size in
map_kernel_page()") which fixes a build failure in next, because commit
2db2008e6363 ("powerpc/64e: Rewrite p4d_populate() as a static inline
function") depends on it.
powerpc/64s: Don't read H_BLOCK_REMOVE characteristics in radix mode 2022-06-29T09:37:07+00:00 Laurent Dufour ldufour@linux.ibm.com 2022-05-23T16:43:53+00:00 61bdbca855024997fd8c82dc190f458aa81beca8 There is no need to read the H_BLOCK_REMOVE characteristics when running in Radix mode because this hcall is never called. Furthermore since the commit 387e220a2e5e ("powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMU") define pseries_lpar_read_hblkrm_characteristics as un empty function if CONFIG_PPC_64S_HASH_MMU is not set, the #ifdef block can be removed. Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220523164353.26441-1-ldufour@linux.ibm.com 
There is no need to read the H_BLOCK_REMOVE characteristics when running in
Radix mode because this hcall is never called.

Furthermore since the commit 387e220a2e5e ("powerpc/64s: Move hash MMU
support code under CONFIG_PPC_64S_HASH_MMU") define
pseries_lpar_read_hblkrm_characteristics as un empty function if
CONFIG_PPC_64S_HASH_MMU is not set, the #ifdef block can be removed.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220523164353.26441-1-ldufour@linux.ibm.com
powerpc: Don't include asm/setup.h in asm/machdep.h 2022-06-20T01:29:49+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2022-06-11T16:55:15+00:00 113fe88eed53af08800f54a03e463636105831e0 asm/machdep.h doesn't need asm/setup.h Remove it. Add it directly in files that needs it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3b1dfb19a2c3265fb4abc2bfc7b6eae9261a998b.1654966508.git.christophe.leroy@csgroup.eu 
asm/machdep.h doesn't need asm/setup.h

Remove it.

Add it directly in files that needs it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3b1dfb19a2c3265fb4abc2bfc7b6eae9261a998b.1654966508.git.christophe.leroy@csgroup.eu
powerpc/pseries: wire up rng during setup_arch() 2022-06-18T00:19:10+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-06-11T15:10:15+00:00 e561e472a3d441753bd012333b057f48fef1045b The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Fortunately, each platform already has a setup_arch function pointer, which means it's easy to wire this up. This commit also removes some noisy log messages that don't add much. Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com 
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.

Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com
Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 2022-05-28T18:27:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-05-28T18:27:17+00:00 6112bd00e84e5dbffebc3c1e908cbe914ca772ee Pull powerpc updates from Michael Ellerman: - Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT) - Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later) - Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ - Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later - Drop support for system call instruction emulation - Many other small features and fixes Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai, Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes, Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras, Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing, Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng. * tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/64: Include cache.h directly in paca.h powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set powerpc/xics: Include missing header powerpc/powernv/pci: Drop VF MPS fixup powerpc/fsl_book3e: Don't set rodata RO too early powerpc/microwatt: Add mmu bits to device tree powerpc/powernv/flash: Check OPAL flash calls exist before using powerpc/powermac: constify device_node in of_irq_parse_oldworld() powerpc/powermac: add missing g5_phy_disable_cpu1() declaration selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch" powerpc: Enable the DAWR on POWER9 DD2.3 and above powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask powerpc: Fix all occurences of "the the" selftests/powerpc/pmu/ebb: remove fixed_instruction.S powerpc/platforms/83xx: Use of_device_get_match_data() powerpc/eeh: Drop redundant spinlock initialization powerpc/iommu: Add missing of_node_put in iommu_init_early_dart powerpc/pseries/vas: Call misc_deregister if sysfs init fails powerpc/papr_scm: Fix leaking nvdimm_events_map elements ... 
Pull powerpc updates from Michael Ellerman:

 - Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)

 - Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)

 - Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ

 - Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later

 - Drop support for system call instruction emulation

 - Many other small features and fixes

Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.

* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
  powerpc/64: Include cache.h directly in paca.h
  powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
  powerpc/xics: Include missing header
  powerpc/powernv/pci: Drop VF MPS fixup
  powerpc/fsl_book3e: Don't set rodata RO too early
  powerpc/microwatt: Add mmu bits to device tree
  powerpc/powernv/flash: Check OPAL flash calls exist before using
  powerpc/powermac: constify device_node in of_irq_parse_oldworld()
  powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
  selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
  powerpc: Enable the DAWR on POWER9 DD2.3 and above
  powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
  powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
  powerpc: Fix all occurences of "the the"
  selftests/powerpc/pmu/ebb: remove fixed_instruction.S
  powerpc/platforms/83xx: Use of_device_get_match_data()
  powerpc/eeh: Drop redundant spinlock initialization
  powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
  powerpc/pseries/vas: Call misc_deregister if sysfs init fails
  powerpc/papr_scm: Fix leaking nvdimm_events_map elements
  ...
powerpc/kasan: Disable address sanitization in kexec paths 2022-05-22T05:58:29+00:00 Daniel Axtens dja@axtens.net 2022-05-18T10:07:05+00:00 2ab2d5794f14c08676690bf0859f16cc768bb3a4 The kexec code paths involve code that necessarily run in real mode, as CPUs are disabled and control is transferred to the new kernel. Disable address sanitization for the kexec code and the functions called in real mode on CPUs being disabled. [paulus@ozlabs.org: combined a few work-in-progress commits of Daniel's and wrote the commit message.] Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> [mpe: Move pseries_machine_kexec() into kexec.c so setup.c can be instrumented] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTFSQ2TUSEaDdVC@cleo 
The kexec code paths involve code that necessarily run in real mode, as
CPUs are disabled and control is transferred to the new kernel. Disable
address sanitization for the kexec code and the functions called in real
mode on CPUs being disabled.

[paulus@ozlabs.org: combined a few work-in-progress commits of
 Daniel's and wrote the commit message.]

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Move pseries_machine_kexec() into kexec.c so setup.c can be instrumented]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTFSQ2TUSEaDdVC@cleo
powerpc: Add missing headers 2022-05-08T12:15:40+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2022-03-08T19:20:25+00:00 e6f6390ab7b9d649c13de2c8a591bce61a10ec3b Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h, asm/pci.h etc... Include the needed headers, and remove asm/prom.h when it was needed exclusively for pulling necessary headers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu 
Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...

Include the needed headers, and remove asm/prom.h when it was
needed exclusively for pulling necessary headers.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu