linux.git/arch/powerpc/platforms/ps3/interrupt.c, branch vsnprintf

powerpc/ps3: Reorganize kerneldoc parameter names

2024-11-14T11:25:42+00:00

Reorganize kerneldoc parameter names to match the parameter
order in the function header.

Problems identified using Coccinelle.

Signed-off-by: Julia Lawall 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Geoff Levand 
Signed-off-by: Michael Ellerman 
Link: https://patch.msgid.link/20240930112121.95324-12-Julia.Lawall@inria.fr

powerpc: Convert irq_domain_add_legacy_isa use to irq_domain_add_legacy

2021-06-10T12:09:16+00:00

irq_domain_add_legacy_isa is a pain. It only exists for the benefit of
two PPC-specific drivers, and creates an ugly dependency between asm/irq.h
and linux/irqdomain.h

Instead, let's convert these two drivers to irq_domain_add_legacy(),
stop using NUM_ISA_INTERRUPTS by directly setting NR_IRQS_LEGACY.

The dependency cannot be broken yet as there is a lot of PPC-related
code that depends on it, but that's the first step towards it.

A followup patch will remove irq_domain_add_legacy_isa.

Signed-off-by: Marc Zyngier

powerpc: Add missing linux/{of.h,irqdomain.h} include directives

2021-06-10T12:09:16+00:00

A bunch of PPC files are missing the inclusion of linux/of.h and
linux/irqdomain.h, relying on transitive inclusion from another
file.

As we are about to break this dependency, make sure these dependencies
are explicit.

Signed-off-by: Marc Zyngier

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167

2019-05-30T18:26:39+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license this program
  is distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 59 temple place suite 330 boston ma 02111
  1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 83 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Richard Fontana 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.021731668@linutronix.de
Signed-off-by: Greg Kroah-Hartman

powerpc: Remove all usages of NO_IRQ

2016-09-20T10:57:12+00:00

NO_IRQ has been == 0 on powerpc for just over ten years (since commit
0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change
platforms to use it")). It's also 0 on most other arches.

Although it's fairly harmless, every now and then it causes confusion
when a driver is built on powerpc and another arch which doesn't define
NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least
some of which are to work around that problem.

So we'd like to remove it. This is fairly trivial in the arch code, we
just convert:

    if (irq == NO_IRQ)	to	if (!irq)
    if (irq != NO_IRQ)	to	if (irq)
    irq = NO_IRQ;	to	irq = 0;
    return NO_IRQ;	to	return 0;

And a few other odd cases as well.

At least for now we keep the #define NO_IRQ, because there is driver
code that uses NO_IRQ and the fixes to remove those will go via other
trees.

Note we also change some occurrences in PPC sound drivers, drivers/ps3,
and drivers/macintosh.

Signed-off-by: Michael Ellerman

powerpc: Fix misspellings in comments.

2016-03-01T08:27:20+00:00

Signed-off-by: Adam Buchbinder 
Signed-off-by: Michael Ellerman

genirq/irqdomain: Allow irq domain aliasing

2015-07-29T22:14:36+00:00

It is not uncommon (at least with the ARM stuff) to have a piece
of hardware that implements different flavours of "interrupts".
A typical example of this is the GICv3 ITS, which implements
standard PCI/MSI support, but also some form of "generic MSI".

So far, the PCI/MSI domain is registered using the ITS device_node,
so that irq_find_host can return it. On the contrary, the raw MSI
domain is not registered with an device_node, making it impossible
to be looked up by another subsystem (obviously, using the same
device_node twice would only result in confusion, as it is not
defined which one irq_find_host would return).

A solution to this is to "type" domains that may be aliasing, and
to be able to lookup an device_node that matches a given type.
For this, we introduce irq_find_matching_host() as a superset
of irq_find_host:

struct irq_domain *irq_find_matching_host(struct device_node *node,
                                enum irq_domain_bus_token bus_token);

where bus_token is the "type" we want to match the domain against
(so far, only DOMAIN_BUS_ANY is defined). This result in some
moderately invasive changes on the PPC side (which is the only
user of the .match method).

This has otherwise no functionnal change.

Reviewed-by: Hanjun Guo 
Signed-off-by: Marc Zyngier 
Cc: 
Cc: Yijing Wang 
Cc: Ma Jun 
Cc: Lorenzo Pieralisi 
Cc: Duc Dang 
Cc: Bjorn Helgaas 
Cc: Jiang Liu 
Cc: Jason Cooper 
Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner

powerpc: Replace __get_cpu_var uses

2014-11-03T01:12:32+00:00

This still has not been merged and now powerpc is the only arch that does
not have this change. Sorry about missing linuxppc-dev before.

V2->V2
  - Fix up to work against 3.18-rc1

__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e.  using a global
register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)

Cc: Benjamin Herrenschmidt 
CC: Paul Mackerras 
Signed-off-by: Christoph Lameter 
[mpe: Fix build errors caused by set/or_softirq_pending(), and rework
      assignment in __set_breakpoint() to use memcpy().]
Signed-off-by: Michael Ellerman

irq_domain: Move irq_virq_count into NOMAP revmap

2012-04-12T06:37:48+00:00

This patch replaces the old global setting of irq_virq_count that is only
used by the NOMAP mapping and instead uses a revmap_data property so that
the maximum NOMAP allocation can be set per NOMAP irq_domain.

There is exactly one user of irq_virq_count in-tree right now: PS3.
Also, irq_virq_count is only useful for the NOMAP mapping.  So,
instead of having a single global irq_virq_count values, this change
drops it entirely and added a max_irq argument to irq_domain_add_nomap().
That makes it a property of an individual nomap irq domain instead of
a global system settting.

Signed-off-by: Grant Likely 
Tested-by: Benjamin Herrenschmidt 
Cc: Thomas Gleixner 
Cc: Milton Miller

irq_domain/powerpc: constify irq_domain_ops

2012-02-16T13:11:24+00:00

Make all the irq_domain_ops structures in powerpc 'static const'

Signed-off-by: Grant Likely 
Cc: Benjamin Herrenschmidt 
Cc: Thomas Gleixner 
Cc: Milton Miller 
Tested-by: Olof Johansson