linux.git/arch/powerpc/platforms/cell/ras.c, branch vsnprintf

powerpc: address missing-prototypes warnings

2023-08-02T12:22:19+00:00

There are a few warnings in powerpc64 defconfig builds after -Wmissing-prototypes
gets promoted from W=1 to the default warning set:

arch/powerpc/mm/book3s64/pgtable.c:422:6: error: no previous prototype for 'arch_report_meminfo' [-Werror=missing-prototypes]
arch/powerpc/platforms/cell/ras.c:275:5: error: no previous prototype for 'cbe_sysreset_hack' [-Werror=missing-prototypes]
arch/powerpc/platforms/cell/spu_manage.c:29:21: error: no previous prototype for 'spu_devnode' [-Werror=missing-prototypes]
arch/powerpc/platforms/pasemi/time.c:12:17: error: no previous prototype for 'pas_get_boot_time' [-Werror=missing-prototypes]
arch/powerpc/platforms/powermac/feature.c:1532:13: error: no previous prototype for 'g5_phy_disable_cpu1' [-Werror=missing-prototypes]
arch/powerpc/platforms/86xx/pic.c:28:13: error: no previous prototype for 'mpc86xx_init_irq' [-Werror=missing-prototypes]
drivers/pci/pci-sysfs.c:936:13: error: no previous prototype for 'pci_adjust_legacy_attr' [-Werror=missing-prototypes]

Address these by including the right header files or marking the
functions static. The audit.c one is a bit tricky since compat_audit.h
cannot include regular kernel headers tht have conflicting types on
32-bit powerpc.

Signed-off-by: Arnd Bergmann 
[mpe: Drop change to __vmemmap_free() which only exists in mm]
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20230727122720.2558065-1-arnd@kernel.org

powerpc/rtas: arch-wide function token lookup conversions

2023-02-13T11:35:03+00:00

With the tokens for all implemented RTAS functions now available via
rtas_function_token(), which is optimal and safe for arbitrary
contexts, there is no need to use rtas_token() or cache its result.

Most conversions are trivial, but a few are worth describing in more
detail:

* Error injection token comparisons for lockdown purposes are
  consolidated into a simple predicate: token_is_restricted_errinjct().

* A couple of special cases in block_rtas_call() do not use
  rtas_token() but perform string comparisons against names in the
  function table. These are converted to compare against token values
  instead, which is logically equivalent but less expensive.

* The lookup for the ibm,os-term token can be deferred until needed,
  instead of caching it at boot to avoid device tree traversal during
  panic.

* Since rtas_function_token() accesses a read-only data structure
  without taking any locks, xmon's lookup of set-indicator can be
  performed as needed instead of cached at startup.

Signed-off-by: Nathan Lynch 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-20-26929c8cce78@linux.ibm.com

powerpc: Add missing headers

2022-05-08T12:15:40+00:00

Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...

Include the needed headers, and remove asm/prom.h when it was
needed exclusively for pulling necessary headers.

Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu

powerpc: convert interrupt handlers to use wrappers

2021-02-08T13:02:12+00:00

Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20210130130852.2952424-29-npiggin@gmail.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

powerpc: Convert to using %pOF instead of full_name

2017-08-23T12:27:04+00:00

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Anatolij Gustschin 
Cc: Scott Wood 
Cc: Kumar Gala 
Cc: Arnd Bergmann 
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Tyrel Datwyler 
Signed-off-by: Michael Ellerman

powerpc/sparse: Make a bunch of things static

2016-09-13T07:35:47+00:00

Squash a bunch of sparse warnings by making things static.

Reviewed-by: Andrew Donnellan 
Signed-off-by: Daniel Axtens 
Signed-off-by: Michael Ellerman

mm: rename alloc_pages_exact_node() to __alloc_pages_node()

2015-09-08T22:35:28+00:00

alloc_pages_exact_node() was introduced in commit 6484eb3e2a81 ("page
allocator: do not check NUMA node ID when the caller knows the node is
valid") as an optimized variant of alloc_pages_node(), that doesn't
fallback to current node for nid == NUMA_NO_NODE.  Unfortunately the
name of the function can easily suggest that the allocation is
restricted to the given node and fails otherwise.  In truth, the node is
only preferred, unless __GFP_THISNODE is passed among the gfp flags.

The misleading name has lead to mistakes in the past, see for example
commits 5265047ac301 ("mm, thp: really limit transparent hugepage
allocation to local node") and b360edb43f8e ("mm, mempolicy:
migrate_to_node should only migrate to node").

Another issue with the name is that there's a family of
alloc_pages_exact*() functions where 'exact' means exact size (instead
of page order), which leads to more confusion.

To prevent further mistakes, this patch effectively renames
alloc_pages_exact_node() to __alloc_pages_node() to better convey that
it's an optimized variant of alloc_pages_node() not intended for general
usage.  Both functions get described in comments.

It has been also considered to really provide a convenience function for
allocations restricted to a node, but the major opinion seems to be that
__GFP_THISNODE already provides that functionality and we shouldn't
duplicate the API needlessly.  The number of users would be small
anyway.

Existing callers of alloc_pages_exact_node() are simply converted to
call __alloc_pages_node(), with the exception of sba_alloc_coherent()
which open-codes the check for NUMA_NO_NODE, so it is converted to use
alloc_pages_node() instead.  This means it no longer performs some
VM_BUG_ON checks, and since the current check for nid in
alloc_pages_node() uses a 'nid < 0' comparison (which includes
NUMA_NO_NODE), it may hide wrong values which would be previously
exposed.

Both differences will be rectified by the next patch.

To sum up, this patch makes no functional changes, except temporarily
hiding potentially buggy callers.  Restricting the checks in
alloc_pages_node() is left for the next patch which can in turn expose
more existing buggy callers.

Signed-off-by: Vlastimil Babka 
Acked-by: Johannes Weiner 
Acked-by: Robin Holt 
Acked-by: Michal Hocko 
Acked-by: Christoph Lameter 
Acked-by: Michael Ellerman 
Cc: Mel Gorman 
Cc: David Rientjes 
Cc: Greg Thelen 
Cc: Aneesh Kumar K.V 
Cc: Pekka Enberg 
Cc: Joonsoo Kim 
Cc: Naoya Horiguchi 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: Arnd Bergmann 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Gleb Natapov 
Cc: Paolo Bonzini 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Cc: Cliff Whickman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: fix GFP_THISNODE callers and clarify

2014-03-11T00:26:19+00:00

GFP_THISNODE is for callers that implement their own clever fallback to
remote nodes.  It restricts the allocation to the specified node and
does not invoke reclaim, assuming that the caller will take care of it
when the fallback fails, e.g.  through a subsequent allocation request
without GFP_THISNODE set.

However, many current GFP_THISNODE users only want the node exclusive
aspect of the flag, without actually implementing their own fallback or
triggering reclaim if necessary.  This results in things like page
migration failing prematurely even when there is easily reclaimable
memory available, unless kswapd happens to be running already or a
concurrent allocation attempt triggers the necessary reclaim.

Convert all callsites that don't implement their own fallback strategy
to __GFP_THISNODE.  This restricts the allocation a single node too, but
at the same time allows the allocator to enter the slowpath, wake
kswapd, and invoke direct reclaim if necessary, to make the allocation
happen when memory is full.

Signed-off-by: Johannes Weiner 
Acked-by: Rik van Riel 
Cc: Jan Stancek 
Cc: Mel Gorman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

powerpc/cell: Add of_node_put to avoid memory leak

2010-09-02T04:07:33+00:00

Add calls to of_node_put in the error handling code following calls to
of_find_node_by_path and of_find_node_by_phandle.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// 
@r exists@
local idexpression x;
expression E,E1;
statement S;
@@

*x =
(of_find_node_by_path
|of_find_node_by_name
|of_find_node_by_phandle
|of_get_parent
|of_get_next_parent
|of_get_next_child
|of_find_compatible_node
|of_match_node
)(...);
...
if (x == NULL) S
<... when != x = E
*if (...) {
  ... when != of_node_put(x)
      when != if (...) { ... of_node_put(x); ... }
(
  return <+...x...+>;
|
*  return ...;
)
}
...>
of_node_put(x);
// 

Signed-off-by: Julia Lawall 
Signed-off-by: Benjamin Herrenschmidt